Pump, Centrifugal Pump,KSB

KSB Movitec VF 40/4 B

Condition: used, Pump, Centrifugal Pump, KSB Movitec VF 40/4 B,Vertical multistage centrifugal pump, Used equipment Manufacturer: KSB (Movitec series) Type: Movitec VF 40/4 B Year of manufacture: 2018 Overall dimensions: 430 x 350 x 1310 mm Weight: 118 kg Electrical specifications: Power output: 15 kW (13.2 kW) Frequency: 50 Hz Rated speed (n fix): 2950 rpm Technical specifications: Cgsdpfx Aey Udbujilow Flow rate / Head (Q/H): 38.7 m³/h / 84 m Efficiency (Eff.): 76% (MEI ≥ 0.70) Shaft seal type (Seal): Code 15 E Operating pressure/temperature (P/T): PN16, -20 / +120 °C Connection (Conn.): PN16/25 NW80 Description: High-performance industrial pump in vertical design.

Condition: like new (used), GA (W) VSDs (Variable Speed Drive) are single-stage, oil-injected, electric motor-driven, stationary screw compressors. The cooling system is equipped with an air cooler and an oil cooler. GA VSD are air-cooled compressors; cooling air is provided by a fan. Main features: - Maximum air inlet temperature: 40°C. - Maximum cooling water outlet temperature: 50°C - Temperature of the air leaving the outlet valve approx.: 30°C - Approximate oil capacity: 17.9 L Cgjdpewxwxzsfx Ailew

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, machine just arrived and will be cleaned soon. turning diameter over bed: 400mm distance between centers: 1000mm spindle size: 50 mm chuck size 200mm Codpfx Aeyh Ndwsilogw speed range 40 rpm to 2000 rpm machine weight: 1700kg including 3 jaw chuck and tool holder

Condition: like new (used), Year of construction: 2023, operating hours: 200 h, functionality: fully functional, center height: 175 mm, center width: 650 mm, The machine was accepted by Studer and has never been put into operation. Csdpfeyttcqjx Ailjgw

Condition: excellent (used), Year of construction: 2016, Model: KSB MTC B 125/7-9.2 Serial number: 9973088585 / 001000 / 01 Capacity: Q = 120.00 m³/h Headroom: H = 151.05 m Speed: N = 1497 rpm Year of manufacture: 2016 Motor manufacturer: Siemens Engine model: 1CV3280B / 1PC30382DB034HT0 Weight: 570 kg Bearings: DE: 6317-C3 NE: 6317-C3 Protection class: IP55 Efficiency class: IE3 Csdpfx Aju Upuijiljgw Ambient temperature range: -20°C to ≤ 40°C Electrical parameters: 400 V Δ, 50 Hz, 133 A, 75 kW, 1485 rpm 690 V Y, 50 Hz, 77 A, 75 kW, 1485 rpm 460 V Δ, 60 Hz, 131 A, 86 kW, 1785 rpm 460 V Δ, 60 Hz, 116 A, 75 kW, 1788 rpm

Year of construction: 2014, operating hours: 9,544 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1400040735, Machining length max. 7,720 mm without face machining Machining length max. 7,600 mm with face machining Travel range X-axis 7,720 mm, feed rate max. 63 m/min Travel range Y-axis 845 mm, feed rate max. 60 m/min Travel range Z-axis 620 mm, feed rate 60 m/min Swivel range A-axis -90° 0° +90° Machining direction top/front/rear/ (left/right) Positioning accuracy +/- 0.1 mm Spindle power 11 kW; S1, water-cooled Spindle speed Max. 24,000 rpm Tool interface HSK 63 F Tool changer automatic Tool storage locations in magazine 8 slots Automatic tool changer for angled head 1 slot Disc milling cutter diameter 120 mm Tool length (from taper) 150 mm Clamp displacement automatic Cedpfeza D Scjx Ailjgw Clamps 8 pieces Operating system Windows Production software EluSoft, EluCAM Compressed air connection 7 bar Electrical connection 400 V, 3-phase, 50 Hz, 25 A Air consumption per minute Approx. 185 l with spray Space requirement L x W x H 11,240 mm x 3400 mm x 2950 mm Weight 8200 kg

Condition: used, Year of construction: 1991, Type: WKF 50/12 N.SE Size: DN50 12 stages Standard version with mechanical seal Flow rate: 26.9 l/s (96.8 m³/h) Cgedpfxjy A Rbds Ailjw Head: 380 m Speed: 2,960 rpm

Condition: ready for operation (used), An emergency power generator with a diesel engine is available. 1) 2-cylinder V-engine, power: 290HP, speed: 1000rpm, dry weight: 4000kg. 2) Synchronous generator ELIN S2506, power: 250kVA. 3) Control cabinet ELIN. 4) Compressed air system. Includes spare parts for the valve train, sealing systems, etc. Documentation available. An on-site inspection is possible. Csdpfow Emx Dex Ailogw

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 6,500 kg, fuel type: diesel, tank capacity: 800 l, color: grey-black, power: 520 kW (707.00 HP), output current: 1,250 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: AC, nominal power: 520 kW (707.00 HP), nominal power (apparent): 650 kVA, continuous power: 553 kW (751.87 HP), continuous power (apparent): 442 kVA, total length: 5,000 mm, total width: 1,650 mm, total height: 2,370 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: MTU 12V1600G70F, type of cooling: water, Equipment: CE marking, ESP: 520 kW / 650 kVA PRP: 442 kW / 553 kVA Csdpfexy Izmsx Ailegw Engine: MTU 12V1600G70F Emission level: not regulated Speed: 1,500 rpm Electronic speed controller Operating voltage: 24 V Cooling: water cooling Generator: Marathon-Weg Voltage: 400/230 V Voltage regulator: yes Control panel: AMF25 – automatic generator control Battery charger: 10 Amps Type: generator in the hood; weatherproof, soundproof •Emergency stop switch (Not-Aus) •Cooler with mechanical fan •Base with integrated fuel tank (800 L) and vibration dampers •Coolant preheating •Voltage and frequency regulation according to ISO 8528-5

Year of construction: 2014, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1400040685, Special Features: Retrofit to WIN10 – NEW – with 6 months warranty on computer and UPS Water-cooled spindle, 9.5 kW S1 3-layer machining possible Carefully cleaned and overhauled – excellent condition Description: Graphical operator guidance and graphical service support A-axis for stepless machining from above – swivel angle 180° HSC milling spindle for speeds up to 24,000 rpm Large machining width Standard with clamping detection and automatic clamp positioning 8 tool stations Complete profile machining with stationary profile bar Rapid basic positioning of the machining unit (up to 64 m/min) on the X axis Robust, low-wear direct drive Protective hood Digital axis controllers for all 4 axes with high-resolution measuring system 4-axis industrial PC control 2 1/2 D interpolation 15" TFT color screen Network connection RJ45 10/100 MBit Hard disk Full PC keyboard Remote maintenance via TCP/IP (requirement: internet access) Technical Specifications: Cjdpfx Aisy Ah Tkelegw Max. machining length without frontal machining: 7,600 mm Max. machining length with frontal machining: 7,500 mm (tool-dependent) Travel X-axis: 7,700 mm Travel speed X-axis: 65 m/min Travel Y-axis: 850 mm Travel speed Y-axis: 60 m/min Travel Z-axis: 650 mm Travel speed Z-axis: 60 m/min Swivel angle A-axis, freely programmable in 0.1° increments: 0 - 180° Positioning accuracy: X-axis: +/- 0.1 mm / 1 m Y-axis: +/- 0.1 mm Z-axis: +/- 0.1 mm A-axis: +/- 0.1° Max. spindle speed: 24,000 rpm Max. spindle power: 9.5 kW S1 Tool holder: HSK F 63 Max. cutter diameter: 80 mm Max. milling cutter diameter: 200 mm Compressed air connection: > 7 bar Voltage: 400 V, 3 PH, 50 Hz Fuse: 35 A 8 tool stations Included Accessories: Tool setting gauge 8 pneumatic material clamps Automatic clamp detection Dosing spray device Protective hood Front light barrier Side safety fences (left and right) Central chip extraction 2 pneumatic material stops 3-circuit clamping system Length measurement for profile bar Barcode scanner with wireless transmission Special version with light barrier Additional options available on request: Programming software (office) eluCad, incl. hotline contract for 6 months 3D import license for one machine of category "L" Data import license package for one machine of category "L" CSV import license for one machine of category "L" Macro hashing license for one machine of category "L" Other information: The machine is delivered ready for transport, including transport locks, loaded onto truck Additionally, we optionally offer the following services on request: Installation and commissioning Machine training 4/5-axis training package for machine and eluCad