Rexroth hydraulic pump

KraussMaffei IPV-7-125/71-71 KM Nr.6441936 / 6268540

Condition: new, functionality: fully functional, pressure: 26 bar, power: 47 kW (63.90 HP), temperature: 305 °C, Unused Howden 4.7 MW Steam Turbine Generator Set (Project Cancelled) Immediately Availability | Original OEM Factory Condition | Full Warranty Benefits Bjdpfozcx U Dsx Albewt Avoid the standard 12-to-18-month OEM manufacturing lead times. This high-efficiency Howden 4.7 MW Steam Turbine is completely unused, preserved in factory-clean condition, and available immediately due to a recent utility project cancellation. Offered at a highly attractive investment level, this asset represents a prime opportunity for rapid deployment in renewable energy, industrial cogeneration (CHP), or independent power production (IPP) projects. Technical Specifications · Manufacturer: Howden · Power Output: 4.7 MW · Condition: Never Installed / Never Used (Cancelled Project) · Inlet Steam Pressure: 26 bar (approx. 377 psi) · Inlet Steam Temperature: 305 Degrees– Superheated Steam · Warranty: Within active OEM warranty period (Subject to verification/transfer protocols) · Status: Stored under strict OEM-compliant preservation protocols inside the factory warehouse. Commercial Terms · Price: Available upon request (Serious inquiries only). · Location: Factory Warehouse (FOB Germany). Documentation & Scope of Supply Available Upon Request Serious buyers and qualified EPC representatives will receive access to the complete technical dossier upon signing an NDA, including: · General Arrangement (GA) and P&ID drawings. · Detailed Scope of Supply (Turbine core, gearbox, generator/alternator metrics, and auxiliary skids). · OEM storage, preservation records, and warranty transfer terms. · Certified factory test protocols

Condition: excellent (used), double pump for Krauss Maffei Maschines Bjdpfx Aleg I Uycsbowt SY2DFE1-21/071-071 KM Nr. 6441936 MNR: R900751978

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 61036936, clamping force: 800 kN, screw diameter: 35 mm, displacement volume: 135 cm³, injection pressure: 1,837 bar, injection weight: 123 g, mold height (min.): 150 mm, ejector force: 22,000 N, ejector stroke: 100 mm, opening stroke: 750 mm, installation height: 400 mm, total length: 4,750 mm, total width: 1,670 mm, total height: 1,820 mm, overall weight: 5,900 kg, heating capacity: 8.9 kW (12.10 HP), drive type: Vollelektrisch, clear span: 470 mm, tool weight: 600,000 g, Injection molding machines direct from the manufacturer! As the manufacturer KraussMaffei, we offer you our tested and flexible stock machines here: The basic injection molding machine, precisionMolding, offers the perfect entry-level solution for all-electric injection molding, enabling you to react quickly and innovatively to market requirements. It combines high performance, simple operation and short delivery times. It can be used in a wide range of applications, e.g. in the packaging industry, the electrical and electronics industry, medical technology and the automotive industry. Your benefits: - Optimized price-performance ratio for a wide range of applications - High energy efficiency thanks to all-electric machine concept - Realization of demanding delivery times thanks to basic machine concept with a wide range of options TECHNICAL DATA: KM 80 / 250 PA G01 (order 38670013) (machine no.: 61036936, new, year of manufacture 2023) CONTROL  MC P1 with 15" TFT color screen with multi-touch functions CLAMPING UNIT  Clamping force kN 800  Mold opening force, max kN 120  Clear width (h x v) mm 470 x 420  Clamping platen (h x v) mm 610 x 560  Tool installation height min. - max. mm 150 - 400  Opening width mm 750  Mold opening stroke max. mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force forwards/backwards kN 22 / 22  Ejector speed forwards/backwards mm/s 300 / 300  Max. Mold weight kg 600 SPRING UNIT  Screw diameter / type mm 35 / standard  Effective Ls/D ratio 20.0  Injection pressure bar 1837  Stroke volume cm³ 135  Shot weight at max. stroke for PS g 123  Injection speed mm/s 200  Injection flow rate cm³/s 192  Screw drive/speed 1/min 382  Plasticizing flow (standard screw)4) g/s 19.5  Nozzle contact force kN 30 ELECTRICAL PARAMETERS  Connected load kW 17.8  Installed heat output kW 8.9  Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS Bedpfx Ajuggb Delbjwt  Net weight with switch cabinet t 5.9  Length x width x height m 4.75 x 1.67 x 1.82 ADDITIONAL EQUIPMENT  Low-wear plasticizing  BluePower fully insulated plasticizing cylinder  Open nozzle  Air valve 1 - fold (BWAP)  Pneum. Control hot runner valve gate 1 - compartment  Electrical interface cascade 4-fold  Electrical preparation for hydraulic auxiliary unit  Euromap interfaces handling E18, E63  Euromap interface (central computer) E67, E77  Water battery 4 - compartment  Automatic central lubrication  Adaptive Process Control (APC)  Spray embossing circuit  Graphic analysis package  Swivel device Injection unit The machine is located in our factory in Parsdorf and is available at short notice. Further additional options can be offered on request. We look forward to your inquiry.

Condition: used, Rotary vane vacuum pump Manufacturer: Becker Type: U4.630 SA/K or F/K Vacuum: 3 mbar - 0.5 mbar Motor: 15 kW Condition: used, tested! Overhaul of the unit is offered separately! Bsdpfxodnu T Rj Albjwt Includes: oil filling, vacuum intake filter Delivery time: in stock!

Condition: used, Rotary vane booster pump Bsdpfodbby Tjx Albewt Manufacturer: Leybold Type: RUVAC RA 7001 Condition: Fully overhauled Includes: New paint job, motor reconditioning, electrical inspection Warranty: 12 months Delivery time: In stock

Condition: used, Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station -Manufacturer: HAWE, hydraulic unit with double pump -Hydraulic pumps: type IPC5-40 / IPC6-30 Bjdpfxop A A R Sj Albewt -Pressure: up to 250 bar -Flow rate: /min -Engine: Loher KNGA250SB-04Z 75 kW -Individual components: see photos -Dimensions: 2300/800/H9500 mm -Weight: 1000 kg

Condition: good (used), HYDRAULIC CYLINDERS Bwodpfxjdkq Ewe Albet 7.26m STROKE (2PIECES) AND BIG VARIATE OF OTHER HYDRAULIC CYLINDERS

Condition: good (used), Year of construction: 2014, operating hours: 8,000 h, functionality: fully functional, overall weight: 1,600 kg, total length: 1,800 mm, total width: 800 mm, total height: 2,150 mm, Becker Variair Central System VACS 0040 0030 ll Performance / power 24Kw Bsdpfx Alevzh Umebowt 3 x vacuum pump Becker VTLF 2.250 Inlet capacity each pump: 244 m3/h, Together: 732m3/h Max Vacuum each pump: 200 mbar

Condition: not inspected (used), Year of construction: 1996, The technical specifications can be seen in the image. Bodshryp Uspfx Albswt

Condition: used, Good working vacuum pump Bsdpfx Alsv Suuusbowt possibly with complete construction with water tanks, hydraulic tank, high pressure pump, high pressure hose reel, compressor...