WasherKitzinger
Spiracon 100
Washer
Kitzinger
Spiracon 100
Year of construction
2024
Condition
New
(fully functional)
Location
Neuenkirchen 

Machine data
- Machine type:
- Washer
- Manufacturer:
- Kitzinger
- Model:
- Spiracon 100
- Year of construction:
- 2024
- Condition:
- new
- Functionality:
- fully functional
Price & Location
- Location:
- Parkstraße 4, 17039 Neuenkirchen, Deutschland

Call
Technical details
- Total length:
- 2,900 mm
- Total width:
- 620 mm
- Total height:
- 1,500 mm
Details about the offer
- Listing ID:
- A22044208
- Update:
- 02.06.2026
Description
for approx. 100 E2 crates/hour
incl. crate turner (single-person operation)
System layout:
1. Zone – Main washing zone:
– with a centrifugal pump with 2.2 kW
(900 l/min at approx. 1 bar) distributed over a total of
50 stainless steel nozzles, which enable
thorough cleaning of all 4 sides.
A plate filter continuously cleans the washing solution
and filters it continuously.
– Tank volume 180 l
– Washing temperature in the main washing zone 50-55°C
The crate transport takes place via a spiral
(KITZINGER utility model), which ensures
precise crate separation and an unobstructed
impact of the washing solution for comprehensive
cleaning of all sides.
2. Zone – Rinsing area:
– The products cleaned in the machine are thoroughly
rinsed from all sides with fresh water.
The fresh water must be at least 45°C when fed to the
machine and is heated to approx. 80°C in the system.
Approximately 250-300 l are required per hour.
Bdjdpfx Aioza Dvuszsc
Technical data:
– Overall length of the base machine: 2000 mm
– with crate turner: 2500 mm
– with crate turner and discharge table: 2900 mm
– Machine width: 620 mm
– Machine height: 1500 mm
– Washing tunnel passage width: up to 430 mm (adjustable)
– Washing tunnel passage height: 330 mm
– Total heating power: boiler 1 x 10 kW
– Pump power: 2.2 kW, 900 l/min at 1 bar
– The housing is completely welded and consists
entirely of stainless steel. The substructure is largely made
of 3 mm sheet metal and is therefore very durable.
The machine has the following connections:
– Fresh water at least 45°C, 3/4″,
– Flow pressure at least 1, max. 6 bar via hose connection,
– Consumption approx. 300 l/h,
IMPORTANT: the machine requires warm fresh water,
connection 1/2″ or 3/4″
– Electricity 14 kW, 400 V, 50 Hz, 32A fuse
– Wastewater DN 40 to floor drain or channel
near the machine, below the machine tank with
standpipe
– with main switch
– powerful centrifugal pump
– system on stainless steel rollers
– sloping discharge side for returning water to the
bottom of the crates
The listing was translated automatically. Translation errors are possible.
incl. crate turner (single-person operation)
System layout:
1. Zone – Main washing zone:
– with a centrifugal pump with 2.2 kW
(900 l/min at approx. 1 bar) distributed over a total of
50 stainless steel nozzles, which enable
thorough cleaning of all 4 sides.
A plate filter continuously cleans the washing solution
and filters it continuously.
– Tank volume 180 l
– Washing temperature in the main washing zone 50-55°C
The crate transport takes place via a spiral
(KITZINGER utility model), which ensures
precise crate separation and an unobstructed
impact of the washing solution for comprehensive
cleaning of all sides.
2. Zone – Rinsing area:
– The products cleaned in the machine are thoroughly
rinsed from all sides with fresh water.
The fresh water must be at least 45°C when fed to the
machine and is heated to approx. 80°C in the system.
Approximately 250-300 l are required per hour.
Bdjdpfx Aioza Dvuszsc
Technical data:
– Overall length of the base machine: 2000 mm
– with crate turner: 2500 mm
– with crate turner and discharge table: 2900 mm
– Machine width: 620 mm
– Machine height: 1500 mm
– Washing tunnel passage width: up to 430 mm (adjustable)
– Washing tunnel passage height: 330 mm
– Total heating power: boiler 1 x 10 kW
– Pump power: 2.2 kW, 900 l/min at 1 bar
– The housing is completely welded and consists
entirely of stainless steel. The substructure is largely made
of 3 mm sheet metal and is therefore very durable.
The machine has the following connections:
– Fresh water at least 45°C, 3/4″,
– Flow pressure at least 1, max. 6 bar via hose connection,
– Consumption approx. 300 l/h,
IMPORTANT: the machine requires warm fresh water,
connection 1/2″ or 3/4″
– Electricity 14 kW, 400 V, 50 Hz, 32A fuse
– Wastewater DN 40 to floor drain or channel
near the machine, below the machine tank with
standpipe
– with main switch
– powerful centrifugal pump
– system on stainless steel rollers
– sloping discharge side for returning water to the
bottom of the crates
The listing was translated automatically. Translation errors are possible.
Seller
Note: Register for free or log in, to access all information.
Registered since: 2026
1 listing online
Send inquiry
Telephone & Fax
+49 395 4... show
Your listing has been deleted successfully
An error has occurred






