Warm air oven

Kanuk Turbo 2 30 kW

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: n.n.b., color channels: 2, paper weight (min.): 40 g/m², paper width (min.): 100 mm, paper width (max.): 520 mm, paper height (min.): 900 mm, paper height (max.): 370 mm, total length: 2,700 mm, total width: 2,034 mm, total height: 1,720 mm, space requirement length: 3,700 mm, space requirement width: 3,000 mm, space requirement height: 2,220 mm, counter reading (black): 1,150, type of input current: AC, input current: 16 A, input voltage: 200,210,220 V, Equipment: documentation/manual, Hans Gronhi GH522 Purchased from the second owner, who had taken over the company from the first buyer. This second owner never reinstalled the machine in their print shop; it was stored in a corner for about four years. Recently, I acquired this machine together with some other equipment. To ensure the memory card and electronics were still functioning, I tested the machine with plain paper. All functions operated correctly: press on/off, photocells, and other controls. A video of the test run can be sent via WhatsApp or downloaded from my Dropbox. Unfortunately, Machineseeker does not allow me to share such links directly via their platform. If required, I will try to contact you via WhatsApp using your phone number. More photos with big data also available. Machine details: Type: Hans Gronhi GH522 Serial number: currently unclear (to be checked once in warehouse) Year of manufacture: 2010 (based on PCB markings, see photos) Delivered to first owner: March 2012 Total impressions: to be verified after arrival in warehouse (estimated under 15 million) Max. sheet size: 520 x 370 mm Min. sheet size: 148 x 100 mm Plate size: 520 x 370 mm Dimensions (L × W × H): 170 × 203 × 165 cm (including steps) Weight (incl. packing): approx. 4,200 kg Condition: To be dismantled coming week and then transported to our warehouse in Son en Breugel, The Netherlands (zip code 5692 CC). Very good and clean condition. Rubber rollers are mostly original, with approx. 50–60% life remaining. Mainly printed 2-colour jobs, so rollers have not been washed excessively. No damages on cylinders, gears, or bushes. Well maintained, never involved in accidents. Features: Stream feeder with suction belt feed board Mechanical and ultrasonic double-sheet detection Mechanical pull side lays Continuous monitoring at front lays Semi-automatic plate loading with pre-load facility Automated ink sweep with pre-inking facility Precision laser-cut segmented ink keys Kodpfxow R Enmo Abnjdr Automatic roller wash (programmable) Continuous dampening system with oscillating bridge roller and pre-damp facility Optional integrated or separated dampening during production Speed-compensated dampening Automated refrigeration/recirculation/dosing unit BEIERXIN (1 unit) Cylinder movement: circumferential, lateral, and diagonal Quick-release blanket clamping Touch screen controls Programmable pre-dampening cycle Powder spray unit with heated reservoir and vibration Three motorised suction slow-down devices Sheet de-curler Air shower in delivery Central oil lubrication system Pneumatic controlled operation (small compressor included) Seperate stand alone PUNCHING unit included Packing & delivery: Machine will be professionally packed and strapped on a heavy duty pallet and additional equipment on EURO palletboxes Loaded on your transport Pricing & conditions: Fixed price: € 12,000 LOT (Loaded on Transport, Incoterms). Down payment: 20% (€ 2,400) as deposit. Proforma invoice: Deposit invoice valid for 5 working days. Please supply full company details to issue the invoice.

Condition: used, Year of construction: 2006, operating hours: 89,000 h, functionality: fully functional, power: 75 kW (101.97 HP), fuel type: diesel, type of cooling: air, Kaeser CSD 122 SFC screw compressor built-in inverter 2.2-10.5m3/min, 75kW, 8.5bar Manufacturer: Kaeser Type: CSD 122 SFC Year of manufacture: 2006 Operating pressure: max 8.5bar Power: 75kW Capacity: 2.2 - 10.5 m3/min Kedpfx Abst A Uyuenjdr Operating hours: 96244 h (Last service: 88854 h) Inclusion dimensions: 1100 x 2200 x 1900 mm Net weight: 1600 kg

Year of construction: 2024, condition: new, Technical data of the furnace nominal heat output: 30,00 kW Kedpopm Ex Hsfx Abnodr maximum heat output: 35,00 kW / approx. 400 m2 complete with: axial fan with speed: 1380 rpm and capacity: 4650 m3/h complete with: blower control unit SCL-1515 innovative design of the air jacket that completely surrounds the combustion chamber for maximum efficiency indestructible firebox, made entirely of certified boiler plate p265gh and 16M06 #6mm thick Large flue that reduces fuel consumption by up to 30%. Energy efficiency class: A energy efficiency index: 110 net weight: 260 kg gross weight: 290 kg Grille: 1000 x 250 mm coating with certified heat-resistant paint, which protects against corrosion and gives an aesthetic appearance solid construction powerful combustion chamber 100 x 55cm! large loading door instruction manual efficiency: 72,00% CO emission at 13% O2: 1.20m Fuel type: recommended seasoned hardwood with moisture content ≤20%* mg/Nm3, briquettes, coal only up to 10%. Dimensions: External dimensions: overall width: 650mm x overall depth: 1350mm x overall height: 920mm. dimensions of the fireplace: width: 550mm x length: 1000mm x height: 450mm Dimensions of the upper door (3 and 4 mm sheet metal): Width: 410mm x Height: 340mm Dimensions of the lower door (3 and 4 mm sheet metal): Width: 410 mm x Height: 150mm Dimensions of the upper loading opening: width: 320mm x height: 320mm Dimensions of the lower opening: width: 320 mm x height: 130 mm dimensions of the grille: width: 250mm x depth: 1000mm Diameter of the hot air outlet: Ø 150mm diameter of the exhaust outlet: Ø 150mm Height of the feet: 140 mm

Condition: used, mileage: 2,659 km, power: 188 kW (255.61 HP), first registration: 08/1983, overall weight: 7,899 kg, fuel type: diesel, color: orange, axle configuration: 4x4, tire size: 14.5r20, operating hours: 1,488 h, machine/vehicle number: 573, Equipment: all wheel drive, compressor, differential lock, hydraulics, second-hand vehicle warranty, TUV Can be made on request , The Intrac are in good condition directly from the authority (Swiss Army) Super maintained and checkbook maintained, see photo, the body is in good condition , The Intrac 2011 is equipped with: 4 steering positions, all-wheel drive, differential locks, 1 seat plus emergency seat , High off-road capability for extremely heavy winter service. The snow blower can also be set at an angle. Tire size 14.5R20, the drive is fully hydraulic with fast and creep speed, total weight is 7900 kg, displacement 12756cm? , , 24Volt power supply , There are also several defective Intrac 2011 with wheel and chain drive still in stock at a price of 8000,- € net each All my vehicles can be seen on my homepage. - You are now rushing back and forth from Flensburg to Berchtesgaden to look at the different cars, but you will find over 150 vehicles of the following types here: - Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-model, Mowag, DB, etc., all with TUV. - even with TUV. - There are also an unimaginable number of spare parts and accessories. - Why would you settle for anything less? - Give us a callGreetings, Philipp Kedpfx Aoqx Sz Dobnjdr

Condition: used, machine/vehicle number: 697, mileage: 32,242 km, power: 132 kW (179.47 HP), first registration: 01/1995, fuel type: diesel, empty load weight: 9,500 kg, maximum load weight: 2,300 kg, overall weight: 11,800 kg, tire size: 9r22,5, axle configuration: 4x4, brakes: retarder, color: green, driver cabin: day cab, gearing type: mechanical, suspension: steel, operation weight: 18,200 kg, Equipment: ABS, all wheel drive, compressor, crane, differential lock, hydraulics, retarder, trailer coupling, TUV is made NEW truck registration , The Steyr in a dreamlike good condition directly from the authority (Swiss Army) Super maintained and checkbook maintained, see photo, the body is in a super good condition , The 12S18 is equipped with: All-wheel drive , differential lock rear , 2 seat patches front a 3. Load capacity at 3.6 meters = 2 tons and at 5.4 meters = 1.36 tons, - MKG crane type HLK 73a1, this also has a Rotzler cable winch, type HK 022 with 10 mm steel cable to lift or lower loads from or into the shaft at the crane tip, - The crane nozzles still have a manual extension so as not to hinder the off-road capability. - Tire size 9R22.5, transmission with 6 gears plus off-road reduction , has a speed limiter , empty weight 9500 kg , total weight is 11800 kg , cubic capacity 6592cm? , , 24Volt power supply , The Steyr not only has Tuv when handed over, but also drives reliably :-) - The Steyr is also ideal as a hobby vehicle but does not shy away from daily work. - All my vehicles can be seen on my homepage. - You are now rushing back and forth from Flensburg to Berchtesgaden to look at the different cars, but here you will find over 150 vehicles of the following types: - Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-Model, Mowag, DB, etc., and all with TUV. - even with TUV. - There are also an unimaginable number of spare parts and accessories. - Why would you settle for anything less? - Give us a call on 0049 (0)2248 Greetings, Philipp Kdsdpfx Asqx Sznobnor

Condition: excellent (used), functionality: fully functional, mileage: 14,769 km, power: 110 kW (149.56 HP), color: white, first registration: 04/1998, chassis manufacturer: Bucher, total length: 6,000 mm, emission class: euro2, overall weight: 5,900 kg, empty load weight: 4,100 kg, Year of construction: 1998, Equipment: all wheel drive, differential lock, full service history, parking heater, power assisted steering, TÜV (roadworthiness inspection) will be newly performed. Truck registration. The Bucher is in an almost new condition, coming directly from an official authority (Army). It has been excellently maintained and has a complete service history—see attached photo. The bodywork is in good used condition. The Duro is equipped with: automatic transmission, all-wheel drive, differential lock, 2 front seats, tire size 10.5R20, fully automatic ZF transmission. The unladen weight is 4,100 kg, gross vehicle weight is 5,900 kg, displacement 3,747 cm³, 24-volt electrical system. Upon delivery, the Bucher not only comes with TÜV but also runs reliably. :-) The Duro is ideal as a hobby vehicle, but also well suited for daily work use. All my vehicles are listed on my homepage. Why drive back and forth from Flensburg to Berchtesgaden to view various vehicles when you can find over 150 vehicles of the following types here: Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-Class, Mowag, DB, etc.—all with TÜV as well. Plus, there's an incredible selection of spare parts and accessories. Why settle for less? Give me a call. Best regards, Philipp from D_MAX (Titans of Steel). Kjdpfeyhm T Sjx Abnodr

Condition: used, mileage: 519 km, power: 28 kW (38.07 HP), first registration: 07/2017, fuel type: diesel, overall weight: 2,400 kg, color: orange, gearing type: mechanical, suspension: other, operating hours: 519 h, Equipment: air conditioning, all wheel drive, cabin, road-legal, 1st hand, HU/AU new, diesel all-wheel first registration 10.07.2017 519 operating hours 28 kW air conditioning cabin lawn tires hydrostat front and rear hydraulics comfort seat road-legal 1st hand permissible total weight 2,400 kg FOR US THE CONDITION AND THE FEEL OF THE CONSTRUCTION IS DECISIVE, THE PRICE IS SECOND. If you have any further questions, please do not hesitate to contact Mr. Faller at the number. //*EXCHANGE, DEPOSIT OR RETIREMENT OF YOUR VEHICLE, AS WELL AS FINANCING POSSIBLE! All information without guarantee* You will find further offers on our homepage: The description and data given do not constitute a guarantee and are not binding. The contract of sale concluded at the dealership when the vehicle is purchased is binding. Subject to errors and prior sale! Kdsdovic Dfspfx Abnsr

Condition: new, The unit is new, complete incl. control, diesel tank, exhaust and batteries. Kjdpfjnkb Unex Abnsdr Description Engine: Fawde 4DX21-53D, 4 cylinders, Water cooled Generator: Newpower NW/N44 Continuous power: 32 kW / 40 kVA Maximum power: 35 kW / 44 kVA Connection:1x5P 63A -, 1x5P 32A -, 1x5P 16A 1x3P 250V sockets, RCD protection circuit breakers Frequency : 50 Hz Voltage: 400/230 V RPM : 1500 U/min. Control: Comap IL4 AMF8 Year of construction: 2023 Dimensions (LxWxH): 2250x 1000 x 1250mm Weight: 900 kg Diesel tank: 118 L. (can be connected to external tank) 100% load l/h 8.7 75% load l/h 6.8 50% load l/h 4,6 Network monitoring, grid feed-in Soundproofed Ready to use. additional costs 63A automatic switch: € 500 100A automatic switch: € 620 Dispatch: - A worldwide transport incl. unloading is possible for an extra charge - In order to be able to give an exact freight price, please send us a request with your data and your full address

Condition: used, mileage: 26,455 km, power: 103 kW (140.04 HP), first registration: 02/1998, fuel type: diesel, empty load weight: 4,940 kg, maximum load weight: 2,550 kg, overall weight: 7,490 kg, axle configuration: 4x2, color: red, driver cabin: other, gearing type: mechanical, emission class: euro2, suspension: steel, number of seats: 9, Equipment: ABS, additional headlights, cabin, differential lock, trailer coupling, Vehicle location: Bovenden, Doka, 1x air seat, switch 5, ABS (anti-lock braking system), differential lock, rotating beacon, storage box, leaf springs, U-protection Kdodpfxsvhn Iyo Abner Construction: Firefighting vehicle LF8/6 with Ziegler construction, built-in pump FP 8/8 & 600l water tank. Sales to businesses or export are subject to 19% VAT! ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! - .

Condition: excellent (used), insulated, electrical installation including lighting Kjdpjw Uf Inefx Abnjdr