Low Level Order Picker

Jungheinrich EJE 220 // Elektro // neue UVV

Condition: excellent (used), Four side planer scm compact xl - planing width 23cm - planing height 13cm -electric lifting of the upper head and feed rollers - all spindles adjustable vertically and horizontally Pgedpjlat Hdsfx Ahyok - bottom 4kW, right and left from one motor 7.5kw kW, upper 5.5kw universal 5.5kw Machine in very good condition

Condition: new, Year of construction: 2026, extraction capacity ~ 8900 m3/h engine power 7.5 kW Pjdpfxsv Dvbas Ahyegk rotation speed 3000 rpm/m rated voltage 400 V, 50 Hz extraction nozzle 300/200 mm extraction speed 28 m/sec. number of filters 45 filter category G filter material polyester noise level 80 dB without connection / 65 dB when connected via pipe to the machine filter surface 22 m2 dimensions 920 x 2260 x 2250 mm weight 450 kg negative pressure 3000 Pa Polyester filter, 3 microns 2 containers Traction Filter cleaning by vibration system with control + 850 euros for model with fire extinguishing system (Safe System) + 550 euros for model with inverter (speed regulation)

Year of construction: 2014, condition: used, PROLOGIC window construction software FenOffice 14 Pgjdpforci S Sox Ahyek Conturex

Condition: new, Comparable to Behringer, Kaltenbach, Kasto, Jaespa, etc. Semi-automatic saw operation with workpiece clamping – sawing – lifting to preset height after completing the cut. Infinitely adjustable hydraulic cutting pressure and feed rate monitoring at the saw band tension. This allows optimal settings for every sawing task, i.e., constant pressure for solid material and constant feed for thin-walled profiles. Especially suited for universal use with various cross-sections, materials, and frequently changing mitre cuts. The machine control system complies with CE standard 89/289. Technical data: Cutting capacity in mm round/flat 90° 325 / 500 x 300 45° 300 / 300 x 300 30° 200 / 200 x 200 45° 300 / 300 x 300 Rapid lowering of the saw frame to the material edge by push button Manual mitre adjustment from 45°–90° – 30°, continuously adjustable with scale The mitre swivel point is the intersection between the saw blade and the fixed vice jaw, meaning there is no change in length measurement when changing the angle Hydraulic full-stroke workpiece clamping – CETOP hydraulic system At any saw frame angle, the material is clamped parallel at 90° Complete coolant system with electric immersion pump Centralised machine operation Saw band drive with end stop Pgsdpet D Azcjfx Ahyjk Moveable band guide arm, adjustable to material width Saw blade return pulleys with carbide guides Integrated chip cleaning brush Saw band tension with torque wrench Finish: Silver-grey / Blue-grey (RAL 7001 / RAL 7031) Remnant piece length: 60 mm Cutting speed: AC frequency-controlled drive from 15–150 m/min, infinitely adjustable at the control panel Drive: Saw band 3.0 kW; 400 V, 50 Hz Hydraulics 1.1 kW Coolant pump 0.1 kW Saw frame feed: Infinitely variable up to 300 mm/min, hydraulically controlled Saw band tension: Mechanical with torque wrench Saw band dimensions: 4200 x 34 x 1.1 mm Working height: 750 mm (without base elements) Weight: 850 kg Dimensions (LxWxH): 1450 x 2350 x 1350 mm

Year of construction: 2006, condition: good (used), FIN Glue spreader SC2R/1300 with 2 rollers The year 2006 manufacture: FIN s.r.l. Italy main technical specification: Width of working: 1300mm The maximum passage between roller: 120mm The diameter of rollers: 185mm Advancement speed: 19m/min Net weight 390 Kg Overall dimensions: 64 x 210 x 136cm Overall dimensions with case: 73 x 200 x 153cm 400 V, 50 Hz, 037 kW Accurate and uniform spreading with any type of glue, excellent technical characteristics, added to the high practicalness, functionality and safety for the operator, place it at the forefront among the 2 roller glue spreaders. Spreading roller covered in antiacid rubber, ground and furrowed, hard wearing, as they are built with a rational layer of rubber it is, therefore, possible to carry out 6-7 grindings. It is easy and quick to disassemble. Spreading, precise and uniform on one or both sides of the panels. Special shock-absorbers, on the roller supports, allow the rollers an automatic opening depth, so as to spread panels of different thickness within 5 mm. they also compensate for eventual parallelism differences of the panel. Uniform glue dosing by a rectified distribution tank, in sheet-iron, with very quick extraction to allow cleaning. Collecting tank, for glue and washing water, in galvanized sheet-iron, extractable for easy cleaning. Safety protections, in sheet metal on the rollers and glue distribution tank, a sheet metal protection prevents the introduction between the rollers of any object more than 5 mm. thick over the transit established, ensuring the maximum safety for the operator. Electrical installation, in a waterproof case with fuses, thermal switch for motor and transformer protection. Control panel, with starting button, stopping button and warning light (24 V). Pgodpfxefgunte Ahyjk Rollers rotation chain with self-registrable turnbuckle pinion. Roller washing with a bored washing tube, for the water intake during this operation.

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 13,117 h, load capacity: 4,000 kg, fuel type: gas, empty load weight: 6,000 kg, Linde H40T-02 for sale. Inspection is also possible. Podpexhgznofx Ahyegk

Year of construction: 2026, condition: new, TNDG manual positioner with handwheel operation and pneumatic clamping. Measurement display via linear encoder and digital readout. Available in lengths of 3, 4, 6, and 8 meters Working height: 800–1050 mm Permissible load: 70 kg per meter Roller dimensions: 40 x 300 mm PACKING AND DIMENSIONS: Pgjdpfx Aopa Nzyehyjk TNDG-3: 3530 x 670 x 430 mm (95 kg) TNDG-4: 4500 x 670 x 430 mm (110 kg) TNDG-6: 6500 x 670 x 430 mm (130 kg) We look forward to your inquiry! Plantec Maschinen GmbH

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 251 h, load capacity: 8,000 kg, lifting height: 4,490 mm, free lift: 1,550 mm, fuel type: electric, mast type: triplex, construction height: 2,900 mm, fork length: 2,400 mm, empty load weight: 16,850 kg, total length: 2,640 mm, drive type: Elektro, construction width: 2,140 mm, Electric 4-wheel forklift Load center: 900 Mast type: Triplex Condition: As good as new Pjdjxxdy Nopfx Ahysgk Technical condition: very good Front tires type: Non Marking Front tires Condition: 80 - 100% Rear tires Type: Non Marking Rear tires Condition: 80 - 100% Battery Volt: 80V Battery year of construction: 2020 Sideshift, Fork positioner, 3rd valve, 4th valve, heating, STVZO, full cab, full free lift, CE certificate,

Condition: used, Year of construction: 2006, functionality: fully functional, Fisher+Rueckle EM-28 Edge strengthening and trimming device edgemaster, year 2006 for sale! Veneer strip length 420 - 2800 mm Veneer sheet width (cross grain) 400 - 4200 mm Veneer strip thickness (incl. trimming) 0,3 - 1,5 mm Veneer strip thickness 0,3 - 2,0 mm Production speed (continuous) 15 - 35 m/min. Cut-off each side 10 - 350 mm Pjdeumrgajpfx Ahysgk Tape (paper) width 6 mm Tape (paper) thickness 0,16 mm Type CP-99 Roll (core in- and outside) ∅ 75 mm, ∅ 325 mm Roll (width) 65 mm Tape running meter 3200 m Electric energy 1,1 kW Compressed air 6 bar Compressed air consumption 5 NL/min

Condition: refurbished (used), SINGLE-SIDE SIZING & EDGE BANDING MACHINE (Left side machine) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Edges thickness in stips / lippings (min/max) mm 1 ALU Pgodpfx Ahscr T N Deyek Panels thickness (min/max) mm 6 - 55 Numerical Control /Software IMATRONIC 121 /01 Adjustable feeding speed (m/min ) 6 - 30 SIZING PART : Pre-milling Unit (vertical joint trimmers) adjustable by N.C. (2 x Kw 4,5) 08.376 Spraying unit (Anti-sticking liquid) EDGE-BANDING PART : Lamps to heat the workpieces side + Glueing Unit (P.U.R. Glue + Quick Melt unit) 04.1569 Band Pressure zone mm 1000 + Edge coils supporting unit (N. 6 reels) Snipping (end-cutting) unit 08.42 (2 x Kw 0,66) working speed 25 m/min (swivelling 0-25°) Rough Trimming unit 08.0555 (2 x Kw 1) Fine Trimming unit 08.055 (2 x Kw 1) 30° + Spraying Unit (for sliding liquid) Multi-Profile Copying unit 08.348 (fine and contour trimming) adjustment by N.C (2 x Kw 0,66) Profile edge scraping unit (Multi-profile, adjustable by N.C.) 08.516 Glue scraping unit 08.517 (Pneumatic) Spraying Unit (for polishing liquid) Buffing unit 08.614 (2 x Kw 0,25) Milling grooving unit 08.183 (1 x Kw 3) Smoothing unit with spheres 08.53 Chamfer Sanding Unit for straight edges WI (4 x Kw 0,75)