Fruit Washer with Grinder IWR2000

ISAR IWR2000

Year of construction: 2026, condition: new, IWR 2000D - The fruit washer with mill for fruits and vegetables is made entirely of high-quality stainless steel and is equipped with a sorting grate, a washing tank, and a conveyor belt. The fruits are immersed in water and, after pre-washing, transported via the conveyor belt where they are thoroughly cleaned with fresh water. Afterwards, the cleaned fruits enter the mill, where they are processed to the desired mash consistency using the selected sieve. The washing system is also equipped with a dosing attachment for pack presses. Technical Information • Nominal capacity: 1500 kg/h • Power requirement: 3 kW, 400 V, 16 A • Material: WNr. 1.4301, AISI 304 stainless steel • Washing tank water capacity: 120 L per batch • Water consumption: 12 L/min • Water connection: 3/4” quick coupling Bedpfx Amstu Ikcjroln • Electric control cabinet with IP65 protection rating • Swiveling Rätz mill • Equipped with rollable wheels • Easy to clean • Through the frequency converter, the conveyor capacity can be easily adjusted Dimensions: Length: 3250 mm Width: 840 mm Height: 2270 mm Weight: 160 kg

Condition: like new (used), Year of construction: 2019, CAP 30 APPLICATOR 1000 SLIM FOR HELICAP 23 PRO: YOM 2019 VERSION 400v Bljdpfxoyynd Rj Amrsn 9.000 RUNNING HOURS NEW CONDITION

Year of construction: 2025, condition: new, SPECIAL OFFER! Washing system with granulator + destoning system IWR2000 Washing system with granulator for fruit and vegetables. The system is made entirely of stainless steel and features a sorting grate, a washing tank, and a conveyor belt. The fruit falls into the water and, after pre-washing, is transported along the conveyor belt, where it is thoroughly cleaned with fresh water. The cleaned fruit is then transferred to the mill, where it can pass through the desired sieve to reach the desired mashing unit. • Easy to clean • Minimal maintenance • The belt speed is continuously adjustable in both directions • With 2 steerable rollers • With 2 fixed rollers Technical information Rated capacity: 2000 kg/h Power requirement: 3 kW, 400 V, 10 A Mash discharge height: 1400 mm Wash tank connection: G 6/4" Cleaning connection: G ½" Material: Wnr. 1.4301, AISI 304 stainless steel Water consumption: approx. 12 L/min. Dimensions: Length: 2700 mm Width: 840 mm Height: 2270 mm Weight: 150 kg IPE4MAX The destoning and straining system is suitable for processing fruit and vegetables. It is equipped with interchangeable sieves and an adjustable rotating rotor for straining or pitting stone fruit, pome fruit, and various types of fruit and berries. The pulp and seeds are ejected separately. The sieves can be replaced quickly and easily. The system is supplied with one sieve; additional sieves can be ordered separately. • Food-safe rubber scraper • Adjustable distance between sieve and scraper • Rolling machine feet/swivel casters with brakes Bjdpfx Amswcl Uleroln Technical information • Rated capacity: up to 4000 kg per hour • Power requirement: 4 kW, 400 V, 16 A • Material: Wnr. 1.4301, AISI 304 stainless steel Sieve sizes: • 0.8 mm: Berries, puree • 1.5 mm: Berries, puree • 3 mm: Apple, pear puree • 5 mm: Cherry • 8 mm: Plum, apricot • 10 mm: Peach, mango Dimensions: Length: 1130 mm Width: 574 mm Height: 1138 mm Weight: 125 kg

Condition: used, Glass bottle filling system for hot filling smoothies. Consisting of the following components: - Unpacking table - bottle rinser - Vacuum filler (with 24 filling valves, Nagema, 1984, type ‘VW 24/1’) - Flash pasteuriser (KZE) - Pressure tank - Capper (Marchesini, type "ML667") - Lid sorter - Tunnel cooler - Blower - Lid inspection (BBull CIS) - Labeller (Anker, 1999, type ‘Roland 10/4’) - Packing table - Conveyors - Control panel - Cooling tower - Steam boiler - Water softening (Lohbeck GmbH, Softtrol CD double system) Additional title: hot filling, with pasteurisation Bjdpfx Aewgc R Eemroln Capacity: 5000 bo/h Formats: 0.25 liter bottles, twist off caps Features: Unpacking table, rinser, vacuum filler, flash pasteuriser, pressure tank, capper, lid sorter, tunnel cooler, lid blow-off, lid inspection, labeller, packing table, conveyors, control panel, cooling tower, steam boiler

Year of construction: 2026, condition: new, Our belt presses are equipped with two large pressing rollers that extend the pressing process, ensuring particularly gentle juice extraction. The result is a clear, foam-free juice of high quality. The pneumatic belt tension and automatic belt control guarantee consistently high quality throughout the entire pressing process. The belt press features an automatic brush cleaning system, eliminating the need for a high-pressure cleaner. The belt is cleaned by six specially designed water nozzles. For cleaning, only a compressor with 8 bar pressure and a ½” water connection are required. Thanks to these special nozzles, water consumption is reduced, leading to lower operating costs. The open design allows for quick and uncomplicated cleaning, which can be completed in just a few minutes. Technical Information: • Nominal capacity: 950 kg/h • Power requirement: 1 kW, 400 V, 16 A • Material: WNr. 1.4301, AISI 304 stainless steel • Compressed air requirement: 50 l/h at 6 bar • IP65 electronic control cabinet • Juice yield: Up to 75% • Fully automatic and stepless control of belt speed Bsdpfx Amsv Sq S Njrsln • User-friendly • Easy to clean • Rollable machine feet Dimensions: Length: 2230 mm Width: 1450 mm Height: 1250 mm Loading height: 1240 mm Pomace discharge height: 500 mm Juice outlet height: 370 mm Weight: 540 kg Optional: Juice collection tray ISW 100 Automatic juice discharge

Year of construction: 2026, condition: new, Continuous pasteurizer electric - up to 400 ltr./h * Water bath boiler * Electric heating 13.5 / 18 / 27 / 31.5 kW - 400 V * Container (stainless steel) 150 ltr. with thermal insulation * Stainless steel tubular heat exchanger * Automatic low temperature safety device (compressed air required) * Stainless steel juice pump * Chassis with holder for low temperature safety device and pump Bjdpfxjt Uzite Amrsln ##### RINK - Pasteurizers for more than 30 years Proven technology - more than 500 units in customer use

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: L23001388, overall weight: 208 kg, tank capacity: 14 l, type of cooling: water, input voltage: 380 V, Semi-industrial machine designed for mixing dough and extruding pasta from any type of pasta flour and semolina. The machine is dedicated to producing short pasta, long pasta, and dough strips. Suitable for medium-scale pasta production as well as feeding dough strips to cutters or nest-shaping machines. All parts in contact with dough, as well as the entire structure, are made of stainless steel. The mixers and screw are easily removable for cleaning. Equipped with an automatic cutter with a full set of knives. Additionally, I am offering a new set for penne pasta production for sale (2200 euro). Blsdpfx Aow Av Snemron

Condition: good (used), Auriol M500VBEX cooking kettle Serial: 3429 Bedsnbd S Tjpfx Amreln Stainless, 500l capacity, steam jacketed, emulsifier with bottom mounted motor, emulsifier diameter 120mm, variable speed, auto tilt to discharge, on load cells, 3Ph

Condition: used, Year of construction: 2017, Overview The winder was manufactured in 2017 by the Spanish manufacturer movitec. It is in operation until the end of September 2023 and can be visited at any time.  Technical data  Max. 120 pallets/ h (with 10 wraps) Dimensions (LxWxH): 5240mm x 3825mm x 4184mm Weight: 2.000kg  Foil width: 500mm  Main frame made of steel  Rotating ring with unwinding device for prestretch film Motorized prestretch system Cutting and welding system Scope of delivery  Protective fence  Winder | Movitec | Saturn S6 | 2017 Compressor | Josval | EDS-900 | 2016 Bledpfjl Uyfksx Amron

Condition: good (used), Year of construction: 2001, CNC turning machine Manufacturer: OKUMA Bedpfok Hz Iwox Amreln Type: LB-250T Model: OSP-U10L YEAR OF MANUFACTURE: 2001 2-axis CNC turning machine with robotic loading Description: Two-axis X-Z turning machine for short workpieces, equipped with a robotic workpiece magazine X-AXIS: 180 mm Z-AXIS: 325 mm Spindle speed: 4500 rpm Coolant system and chip conveyor