Knote hole boring machine

HOLZMANN STM-26

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 620x560x1720 mm Weight 110 kg Total power requirement 0 kw Blsdov A Hm Repfx Aqrjh

Condition: new, empty load weight: 490 kg, maximum load weight: 810 kg, overall weight: 1,300 kg, loading space length: 3,100 mm, loading space width: 1,650 mm, loading space height: 1,950 mm, tire size: 185/70r13, Roadstar 400 tandem box trailer from *Cheval Liberte / Debon*. Attractive *design*, *aerodynamic front*, *sandwich walls*, *aluminum floor* and *polyester roof* are combined in this *box*. Bedjqah R Aspfx Aqrolh * *Hardly any other *car trailer* has a similarly outstanding *driving behavior* as this one! The *aluminum box trailer* is equipped with the *Pullman2 chassis*, which was developed by *Cheval Liberte* itself. The low loading height of just 35 cm and the *independent suspension* with *trailing arm*, *coil spring* and *shock absorber* to *automobile standard* ensure optimum* driving characteristics*. The *flat drive-on angle* is ideal for loading *motorcycles* and *quads*. Outstanding is the *ramp of the poly box trailer*, which can also be opened as a *door* for easy loading of *pallets* and other *goods*. The extensive standard equipment of the *car trailer* includes a *poly roof* and *poly front* in one piece, *sandwich walls*, *aluminum floor*, *side flap*, *folding door system*, *100km/h*, *interior light*, *automatic support wheel*, *towing eyes*, *sturdy frame* and a *V-drawbar*. Useful box trailer accessories such as *motorcycle rocker*, *stand rail*, *motorcycle straps*, *tie-down straps, rear supports* and* lashing eyes* are also available. The body is splash-proof.

Condition: used, SECOND-HAND RADIAL ARM SAW STROMAB Blsdpswr T Hbefx Aqroh

Condition: reconditioned (used), Mortising machine, swing chisel mortising machine MAKA type DB 5 with many mortising tools, see pictures Workpiece stop 2 pieces Stop rail right / left 2150 mm Workpiece blow-out 2x Bodpfx Aqsv Hm Nmerjlh Foot switch Pneumatic workpiece clamping on the side 1 piece Pneumatic workpiece clamping from above 2 pieces Extraction connection D 120 mm Weight approx. 550 kg Dimensions approx. L x W x H = 1200 mm x 800 mm x 1500 mm (without stop rails) Note on used machines: • Errors in technical information and prior sale reserved. • Prices stated are pick-up prices from location - free loading! • The machines have been cleaned and function-tested. • All machines are purchased as seen without any claim to warranty. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only answer inquiries if you provide your address + telephone number!)

Condition: used, Year of construction: 2011, EMCO Hyperturn 45 – CNC Turning Machine - Siemens SINUMERIK CNC control system - Main spindle equipped with a full clamping cylinder (operation with bar feeder not possible; loading and unloading via automatic swing loader, see video) - Year of manufacture: 2011 Technical Data Working Area: Bjdjyglx Rjpfx Aqrjlh - Maximum swing diameter over bed: 430 mm - Swing diameter over cross slide: 300 mm - Maximum turning diameter: 300 mm - Maximum part length: 480 mm - Maximum bar capacity: 45 mm - Distance between main and counter spindle (spindle noses): 720 mm Slide Travel Range: - Slide travel X / X2: 160 / 150 mm - Slide travel Z / Z2 / Z3: 510 / 510 / 510 mm Main Spindle (Spindle 1): - Spindle mount – DIN 55026: KK 5 - Spindle bore: 53 mm - Spindle bearing (internal diameter): 85 mm - Maximum mass moment of inertia for clamping device and workpiece: 0.08 kgm² Main Spindle Clamping System: - Hollow clamping cylinder (hydraulic) with draw tube, max. bar passage: 45 mm - Max. standard chuck size: 160 mm Main Spindle Drive: - AC hollow shaft spindle motor, power (100%/40% duty cycle): 11 / 15 kW - Speed range (infinitely variable): 0 – 7,000 rpm - Max. spindle torque: 100 Nm Counter Spindle (Spindle 2): - Spindle mount – DIN 55026: KK 5 - Spindle bore: 53 mm - Spindle bearing (internal diameter): 85 mm - Z3 travel: 510 mm - Traverse speed: 45 m/min - Maximum mass moment of inertia for clamping device and workpiece: 0.08 kgm² - Counter spindle clamping system: hollow clamping cylinder with draw tube and integrated pneumatic parts ejector - Max. chuck size: 160 mm Counter Spindle Drive: - AC hollow shaft spindle motor, power (100%/40% duty cycle): 11 / 15 kW - Speed range (infinitely variable): 0 – 7,000 rpm - Max. spindle torque: 100 Nm C Axes (Spindles 1 and 2): - Circular axis resolution: 0.001° - Rapid traverse speed: 1000 / 100 rpm - Spindle indexing (disc brake): 0.01° Feed Drives: - Rapid traverse X / Z: 30 / 45 m/min - Feed force X: 4,000 N - Feed force Z / Z2 / Z3: 5,000 / 5,000 / 6,000 N - Position scatter width Ps per VDI 3441 in X / Y / Z: 3 / 3 / 3 µm Turrets 1 and 2 (upper and lower system): - Radial tool turret with directional logic and driven tools - Number of tool stations per turret: 12 - Tool holders according to DIN 69880: VDI 25 - Tool cross-section (square tools): 16 × 16 mm - Boring bar shank diameter: 25 mm - Turret indexing time: 0.2 s Driven Tool Stations (coupling according to DIN 5480): - Number of driven tool stations per turret: 12 - Speed range: 0 – 6,000 rpm - Maximum drive power: 4 kW - Maximum torque: 16 Nm - Maximum duty cycle at maximum speed or power: 25% Lubrication System: - Guideways, ball screws: automatic central oil lubrication - Main spindle, counter spindle: grease lubrication Chip Conveyor: - Hinged belt conveyor, discharge height: 1,200 mm Electrical Connection: - Power supply: 400 V ~3/PE - Machine connected load: 30 kVA - Max. main fuse for the machine: 80 A - Required short-circuit power: 2,500 kVA Dimensions / Weights: - Height of spindle axis above floor: 1,126 mm - Overall height (incl. oil mist separator): 2,325 mm - Footprint (incl. chip conveyor, without cooling unit): 3,830 × 1,950 mm - Net weight of the machine without chip conveyor: 4,200 kg Sound Pressure Level: - Average sound pressure level: 78 dB(A)

Condition: excellent (used), Year of construction: 1986, MAFELL Erika table saw, with side adjustable stop Blodpfsud At Rox Aqrsh

Condition: new, Year of construction: 2026, High-speed timber processing with high-powered motor and PLC controlled motion. Solid steel construction with machined saw table, and high-power induction motor to cut through hardwood with ease. Hyper-fast cutting capable with up to 0.5 sec for a complete up-down saw motion. • Ø460 mm TCT blade with 5.5 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guards 300mm on each side of saw blade • Adjustable T-clamp with adjustable saw up-down cutting feed rate • Flat precision ground table, assuring cutting accuracy • 3x 100mm dust extraction outlets • Fully enclosed blade housing • Spindle lock for easy blade removal • TCT 120-tooth saw blade included • Available in either right or left hand configuration to suit work flow • Also available 455, 600, 762 and 914mm diameter blade models Bodpfx Aqsmcaahjrjlh Highly suitable for: • Frame and truss manufacture • Pallets manufacture • Windows and doors manufacture • Furniture manufacture • Bulk timber cutting

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1600x330x420 mm Weight 130 kg Bledpjv A Hwisfx Aqrsh Total power requirement 1,1 kw

Condition: good (used), functionality: fully functional, planing width: 250 mm, total width: 540 mm, total height: 540 mm, total length: 1,100 mm, Planer, planer 250 mm Specification: • condition - used Bsdowbpu Tjpfx Aqrjlh • max working width - 250 mm • length of tops - 1100 mm • manual setting of tops • 3-knife shaft for traditional knives • start-up 0-1 • culaga dimensions 40 x 6 cm • overall dimensions 110 x 54 x 50 cm (length x width x height) Additional information: • very good technical and visual condition • the photos presented show the actual condition of the item for sale • possibility of switching on and checking the device on site