Flanging machine

HOLZ-HER STREAMER 1057

Condition: used, Holz Her STREAMER 1057 XL FÜ + PU Edge thickness: 0.4 - 6 mm Modern control unit with selector switch for aggregate settings Fully automatic edge magazine for roll and strip material Rodpfeywh Epox Ahvebw Glue application station GLU-JET cartridge + PU bonding Adhesive application via nozzle technology Touch-sensitive nozzle Workpiece height: 6-60 mm Automatic glue height adjustment High-quality 3-roller pressure unit, 1st roller motorized Pneumatic end trimming unit for roll and strip material up to 6 mm edge thickness Pneumatic adjustment of trimming saws from 0-10° angle Milling unit: flush trimming 6 mm, radius milling - bevel milling - 15° Corner copying unit - 3 mm edge thickness Scraper unit for chamfers and radii with 2 scraper holders Surface scraper unit - finish Buffing unit Spraying device in infeed and outfeed areas, as well as for PU Machine supplied with all working units/tools Machine is WORKSHOP TESTED First delivered in 2016 Available ex stock Lieboch

Condition: like new (used), Working width 1350 mm Rbodpfx Ajuuitgohvjw The machine is in excellent, new condition as shown in the pictures.

Condition: used, Edgebander Holzher Streamer 1057 Pre-milling cutters Glue application, GLUE JET cartridge system Suitable for PUR glue Equipped with glue discharge Pneumatic pre-cut guillotine Pressure rollers Final trimming saws adjustable at an angle Top and bottom milling units R1, R2 Corner rounding unit Profile scraper Rjdpjyrq Eaefx Ahvsbw Flat scraper Max edge height mm: 60 Max edge thickness in roll mm: 3 Feed speed 10m/min Comes with fluids Polishing unit

Condition: used, Year of construction: 2014, Feed direction of the panel: to the right from the operator Maximum edge thickness: 3 mm Minimum workpiece thickness: 8 mm Maximum workpiece thickness: 60 mm Minimum workpiece width: 65 mm Minimum workpiece length: 160 mm Feed speed: 10 m/min Jointing unit: Yes, with 2 milling units Jointing tool: Diamond cutters Diameter: 70 mm Height: 48 mm Infeed fence adjustment: manual Chopping shear up to: 3 mm Single edge feeding: possible Rjdpsylpwuofx Ahvjbw Gluing: GlueJet PU gluing: possible Cross-cut saw: Yes Combination unit for flush/bevel/radius: pneumatically adjustable Corner rounding unit: pneumatically adjustable Profile scraper: yes Flat scraper: yes Aggregate display: on the display Control type: via limit switches Operation: Control panel with buttons Transport device: No Extendable roller support: Yes Protective hood: Yes Working height or feed table height: 874 mm Weight approx.: 1400 kg Extraction diameter: 160 mm Storage location:

Condition: excellent (used), Year of construction: 2012, Used machine from business closure. Rbsdpfxox Tp U Ro Ahvsw GROSS shredder - Model GAZ 62 - Year of manufacture: 2012 - 18.5 kW - good condition - available immediately

Condition: used, Holz Her STREAMER 1057 FÜ + PU Edge thickness: 0.4 - 6 mm Modern control system with selector switch for aggregate adjustment Pre-milling unit for precise workpiece preparation before the gluing section Fully automatic edge magazine for coil and strip materials GLU-JET cartridge adhesive application station + PU gluing Adhesive application via nozzle technology Workpiece height: 6–60 mm Automatic glue height adjustment High-quality 3-roller pressure unit, 1st roller motorized Pneumatic end trimming unit for coil and strip material up to 6 mm edge thickness With pneumatic adjustment for 0–10° inclination of the end saws Milling unit for flush trimming up to 6 mm, radius milling and bevel milling up to 15° Redpsyg H Hijfx Ahvebw Corner rounding unit for edges up to 3 mm thickness Scraper unit for bevels and radii, equipped with 2 scraper holders Flat scraper unit for finishing Spraying device – PU Machine equipped with all processing tools Machine is WORKSHOP-TESTED and in TOP CONDITION Available from stock in Lieboch

Condition: like new (used), functionality: fully functional, AUTOMATIC EDGEBANDER machine model HOLZHER STREAMER 1057 second hand machine working condition : Excellent , like new Declaration of CE-conformity Conformity marking CE mark with Instruction Booklets for the application of edges in PVC, veneer, melamine, ABS , solid wood max.mm.6 for furniture, furnishings, kitchens, bathrooms, doors, panels and various Control HOLZ-HER KPL volt. 400/50 technical details: min. height of gluing panel mm.8 max. height of gluing panel mm.60 min. thickness roll edge mm.0.4 max. thickness roll edge mm.3 min. panel width mm.65 min. panel length mm.160 max.feed speed: 10 mt./min. Rjdpfeyk E Dzox Ahvobw support for large panels soundproof cabin glue system cartridge Composition machine . units : 1.Magazine for single strips HOLZ-HER Edge magazine 1903 2.Premilling unit . HOLZ-HER Premilling unit FG 201 3.Trimming saw 2 motors . HOLZ-HER Trimming saw 1918 PNEU 4.Flush/radius/chamfer milling units . 2 motors . HOLZ-HER Fine milling unit 1827 MAN 5.Corner rounding unit . HOLZ-HER Corner rounding unit 1832 . 1 motor 6.Scraper unit . Profile scraper, Flat scraper . HOLZ-HER Profile scraper unit 1929 HOLZ-HER Flat scraper unit 1964

Condition: used, Year of construction: 1995, Used machine Redpfxoxymd Hj Ahvsbw Year of manufacture: 1995 Features and technical data: Cutting length: 5300 mm Cutting height: 2200 mm Max. workpiece thickness: 80 mm Motor: 5.5 kW Compressed air connection: 6 bar, 50 NL/min Extraction connection: 2 x 100 mm, 1200 m³/h Pneumatic aggregate locking Pneumatic aggregate penetration Digital horizontal display Availability: by arrangement Location: Flörsheim

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, workpiece width (max.): 65 mm, workpiece length (max.): 250 mm, feed rate X-axis: 10 m/min, overall weight: 1,200 kg, TECHNICAL DETAILS Edge band thickness min.: 3 mm Edge band thickness max.: 6 mm Panel thickness min.: 6 mm Panel thickness max.: 45 mm Panel width min.: 65 mm Panel width max.: 65 mm Panel length min.: 160 mm Panel length max.: 250 mm Feed speed min.: 10 m/min Feed speed max.: 10 m/min MACHINE SPECIFICATIONS Dimensions & Weight Dimensions (L x W x H): 4,630 x 1,600 x 1,770 mm Weight: 1,200 kg Number of transport packages: 1 piece Voltage: 400 V Power consumption: 29.37 A Fuse protection: 35 A EQUIPMENT Pre-milling unit - Type: FG 201 - tools included Glue application unit - Type: 1903 Pressure rollers - Type: 1812 - tools included End trimming unit - Type: 1918 - tools included Rough trimming unit - Type: FR201 - tools included Corner rounding unit - Type: 1832 - tools included Rbodpfx Ahjx Rbm Hjvew Radius scraping unit - Type: 1964 - tools included

Condition: new, Year of construction: 2023, Demo machine Year of manufacture: 2023 Equipment and technical data: Base machine 1057 XL C with Beckhoff touch-screen control Extendable workpiece support 600 mm Long infeed fence 1252 mm Jointing milling unit with 2 motors DIA jointing cutter 70 x 64 x 30 mm Z2+2, left and right rotation Edgebanding unit 1903 fully automatic Glujet 301 adhesive application system Automatic reloading function Magazine for 1.4 kg adhesive cartridges (holds 4 cartridges) GluJet collection container Pressure unit 1912-3 pneumatic Spray unit GM 201 after pressure unit End trimming unit 1918 pneumatic Extraction hoods for end trimming unit Combination milling unit FR201 with DIA cutters R=2 mm Profile trimming unit 1832 Shelf program Radius scraper ZK 301 Chip collection box Flat scraper FK 701 Spray unit front and rear TR201 Buffing unit 1940 Rjdpfx Asw I Uytshvobw Location: Solingen Availability: short notice

Condition: excellent (used), Year of construction: 2020, 158.000 running metres BASE MACHINE AURIGA 1308XL TECHNICAL DATA Edge banding machine for edgebanding and finishing of sheet materials Edge thickness of roll material: 0.4-3mm (depending on material) Edge thickness of strip material: 0.4-8mm (depending on material) Edge cross-section: max. 6x42mm Edge height: max. 65mm Workpiece thickness: 8-60mm (restrictions possible for individual units) Workpiece width: min.65mm Workpiece length: min.160mm (without corner copying 1832) Workpiece length: min.180mm Feed speed: 10m/min. MACHINE OPERATION Edge Control 19 with 18.5" touchscreen colour monitor 16:9 Powerful control system with extremely simple operation for efficient machine set-up and changeover. Rotating and swivelling control panel at eye level Motorised pressure bridge adjustment iTronic - Adaptive pressure and adhesive quantity control Automatic, programme-dependent fine adjustment Optimum adaptation to edge thickness, edge materials and adhesive types guarantees the best processing results Automation package consisting of - Automatic glue quantity control - adaptive snipping knife - adaptive printing unit incl. residual adhesive quantity display incl. fully automatic PUR flushing routine Premilling unit FG201 with 2 milling heads for joining the panel edge 1x counter-rotating, 1xsynchronised, Milling cutter, diamond Ø70x64x30 mm,Z2+2 Edge feeder 1903 automatic transport of rolls and strips max. loading capacity: 40 mm Glu Jet GJ301 glue application system (2,3kW,50Hz) Automatic glue height adjustment Glu Jet hybrid technology for EVA and PUR adhesives Adhesives in cartridge and granulate form for neutral and coloured adhesives Hopper for 1.4 kg cartridges (4 cartridges) Hopper for 1.5 kg granulate Pneumatic pressure unit 1912-3 First roller driven with pneumatic immersion control, 2 conical holding pressure rollers Cutting unit 1918 (60 mm) pneumatic (2 x 0.45 kW, 12000 min-1) pneumatic swivelling 0/10° Dust extraction hoods for end trimming unit 1918 Multifunctional trimming unit 1827 MOT4 for trimming the top and bottom longitudinal edge with motorised positioning of the horizontal tracing shoes with motorised positioning of the trimming motors in axial direction incl. pneumatic adjustment (top and bottom separately) for flush-radius routing incl. blow nozzles - Flush cutting unit - Radius - Tilt the chamfer 0 - 15°, manually (with max. edge thickness 6 mm) Pneumatic swivelling device for trimming unit 1827 MOT4 Pneumatic swivelling to bevel 15° from the control unit Pneumatic vertical tracer rollers Adjustment of the vertical tracer roller by 0.1 mm for routing with edge overhang Corner rounding unit (1x0,35kW,200Hz,12000min-1) Corner copying function up to 3 mm edge thickness Workpiece thickness: 12 - 60 mm, with DIA tool R=2mm Scraper unit 1929 MOT4 incl. high-gloss package with motorised adjustment of the horizontal feeler rollers, incl. pneumatic adjustment (separate top and bottom) Surface scraper FK701 Rbjdpfx Ajxayvpshvjw With pre- and post-scraping for removing the adhesive residue along the complete panel length for a clean glue joint. Buffing unit 1940 (2 x 0,09 kW, 50 / 60 Hz, 1400 min-1) For finishing and polishing edges, with 2 textile discs, swivelling 0 - 5°

Condition: ready for operation (used), Year of construction: 2015, machine/vehicle number: 280/1-501 15506069, functionality: fully functional, No reserve price - guaranteed sale at the highest bid! Bidding obligates the buyer to pick up the item by May 26, 2025. Standard equipment according to manufacturer - no guarantee TECHNICAL DETAILS Min. workpiece length: 160 mm Min. workpiece width: 65 mm Workpiece thickness: 8 – 45 mm Edge width: 0.4 – 3 mm Feed speed: 10 m/min Feed system: Single conveyor for wound edge strips or strips Rbjdpewkp S Dsfx Ahvsw Pre-milling unit Milling feed: 45 mm Glue application Glue system: Glu Jet S Glue type: EVA and PUR adhesive (single-cartridge system with glue stick) Pressure system Number of pressure rollers: 3 Trimming Trimming motors: Single motor system 45 mm Cutting cut Cutting unit: Multifunctional unit Corner rounding Corner rounding: 60 mm Scraper Scraper: Mechanical including chip extraction Surface scraper Surface scraper: Mechanical, with chip collector MACHINE DETAILS Overall length: 4,930 mm Width × Height: 1,600 × 1,774 mm Weight: 1,400 kg

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 Specifications and technical data: Base machine 1057 XL C with Beckhoff touch-screen control Extendable workpiece support 600 mm Extension for extendable outrigger Standard infeed fence 3 LED lights in the infeed area Jointing unit with two motors DIA jointing cutter 70 x 64 x 30 mm Z2+2, left and right rotation Edge feeding system 1903, fully automatic GluJet 301 adhesive application system Automatic reloading function Magazine for 1.4 kg adhesive cartridges (holds 4 cartridges) GluJet collection container Redjw I U Rfspfx Ahvebw Pressure unit 1912-3, pneumatic Spray device GM 201 after pressure unit End trimming unit 1918, pneumatic Extraction hoods for end trimming unit Combined trimming unit FR201 with DIA cutters R=2 mm Contour trimming unit 1832 Shelf program Radius scraper ZK 301 Chip collection box Flat scraper FK 701 Spray device front and rear TR201 Buffing unit 1940 Availability: short-term Location: Flörsheim

Condition: reconditioned (used), Year of construction: 2017, functionality: fully functional, input voltage: 380 V, workpiece height (max.): 60 mm, edge thickness (max.): 8 mm, actuation type: electric, total height: 1,774 mm, total length: 4,580 mm, overall weight: 1,450 kg, Equipment: CE marking, documentation/manual, Workpiece thickness for edgebanding: between 8 and 60 mm, Edge thickness up to 8 mm depending on the unit Configuration: -calibrating, -edge feeding, -glue application, -end trimming, -milling group; flat or profile milling of upper or lower edges, -profile milling unit, -scraping group, -polishing station Pressure beam, feed stop, control panel Year: 2017 Rbsdpsytp Hrofx Ahvew