Shaking Water Bath - 22 L

Heto SB22

Condition: like new (used), Portable truck weighing scale Portable mounted on a chassis, bolted and removable. Capacity 60 MT Length 14 M Fgodpfxsmfqkhs Ab Tsk

Year of construction: 1986, condition: used, machine/vehicle number: 80.000.-978, Version A, size 1 Test force: 750 kN Type of force effect: spring load kN pre-force: max.300 kN Projection: 200 mm Test height: 14 mm Voltage: 380/220 V Type of current: 50 Hz Accessories and special equipment: - Brinell-Vickers hardness measuring electronics type 2.802.007 - Glare shield for ground-glass device Space requirement: Fedpfx Abjl Axc Ue Togk 360 x 840 x 1250 mm Weight approx. 620 kg

Year of construction: 1987, condition: good (used), Temperature chamber Temperature range: -70°C to +180°C Temperature change heating: 5.3 K / min Speed after cooling: 4.7 K / min Temperature deviation temporally in the middle of useful space: ±0.2K to ±0.5K Temperature homogeneity spatially related to setpoint: ±0.5K to ±1.5K Heat compensation: at +20°C approx. 350 W Power (kW): 1.5 / A 7.5 Sound pressure level: Approx. 55 dB (A) Fgsdpfjhtrq Tjx Ab Tjk Electric: Nominal voltage: 1 / N / PE AC230 V +/- 10% 50Hz Nominal output: Approx. 0.9 kW Nominal current: Approx. 6.0 A

Condition: excellent (used), Memmert drying cabinet Memmert ULE 600 drying cabinet With circulating air. Max. 220°C. Mains connection : 2400w 220 V. 50 Hz. Fgodpfx Aopq Ttpsb Tek Internal dimensions: 640x800x500 mm. 245 liters - Shelves 1X Scope of delivery: Length: 950 Width: 600 Height: 910mm Weight: 105kg

Condition: new, Year of construction: 2025, Available in stock Worldwide delivery Diesel engine. Drum capacity (0,8 m3). Fuel tank for 50l (equipped with a fuel level indicator). Control panel with indicators. Mixing of asphalt inside the tank. Front loading/unloading. More options: Bucket + trailer Trailer Fgodod Swnvopfx Ab Tok No trailer, no bucket

Condition: good (used), LAC Heating oven SV6000/25 Temperature range +20 to +250°C TESTO software Weight: 1750 kg 6000 liters Outer dimensions 2850×2000×3700 mm Test chamber dimensions 2000×1500×2000 mm Fodpfxeuugaqe Ab Tsgk Oven switch 100/3 Max. Floor load 2000 kg Circulation 3000 m3 /h Nominal power 66 kW Nominal current 98 A Voltage 3/N/PE 400/230V AC 50 Hz Weight 1750 kg Condition: gebraucht / used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 2008, condition: ready for operation (used), There are two identical machines available, year of construction machine 1/ 2: 2003/ 2008, with documentation, were part of a flexo printing machine Fischer & Krecke 16S/10. Fedpfx Aboquu Tpo Tsgk

Year of construction: 2010, condition: excellent (used), Here we offer you a Heraeus Vötsch temperature test chamber. Vötsch temperature test chamber VLM 3068/S air-cooled (building material test chambers loaded from above) Control panel The control panel is mounted on a console on the temperature test chamber. By control and operating commands can be triggered by simply touching the function symbols. can be triggered. The operating instructions for the control panel are enclosed Main switch The main switch is located at the front of the temperature test chamber. Air treatment room The air treatment room is located in the test room and contains the components required for temperature control. In the air treatment room, the air is tempered (cooling/heating) and circulated by the test room fan. circulated by the test room fan. The air is sucked in at the center of the side wall and enters the test chamber again via the air baffles on the long sides. Fodperbiyfefx Ab Togk Feed-throughs The temperature test chamber can optionally be equipped with feed-throughs. Through these can be used to route cables and test equipment into the test chamber. Entry port front 2 x 82 mm ∅ rear 1 x 85 mm ∅ Internal dimensions Width 2000 mm Depth 570 mm Height 600 mm External dimensions Width 3000 mm Depth 870 mm Height 1060 mm Technical data: Data for mechanical load: Max. load with test material Test area floor (evenly distributed over the surface) 600 kg Point load 50 kg Data for temperature tests: Temperature range -30 °C to +125 °C Temperature deviation over time in the center of the usable space ±1 K Temperature change rate Heating approx. 1 K/min Cooling approx. 2 K/min Data for operation: Nominal voltage 3/N / PE AC 400 V ±10% 50 Hz Rated power 3 kW Rated current 9 A Customer fuse 16A slow-blow Temperature test chamber VLM 3068/S Test chamber volume approx. 680 l Weight approx. 700 kg Refrigerant: R-404A Noise measurement Sound pressure level approx. 68 dB(A) Type: VLM 3068/S Condition: second-hand / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Year of construction: 2020, condition: new, machine/vehicle number: 373064736, Bitumentank horizontal Capacity: 50 m³ Thermal oil heated Condition: NEW This offer is subject to change, input errors and mistakes excepted. Only the specific agreements in the order confirmation or purchase contract are valid. Basis for this contract are exclusively our General Terms and Conditions (GTC). These are available on our homepage at any time or can be requested from us. The place of jurisdiction is Eberswalde, Germany. Fedei Aqikopfx Ab Tsgk Further Information Intended use: construction, General condition: very good, Technical condition: very good, Visual condition: very good,

Condition: ready for operation (used), Mettler Toledo ICS425 K-3XS/ DR/F/m/65 Precision industrial scale There are 3 pieces available. Description see picture 2 Description was taken over. You are welcome to come by for a viewing You will receive a proper invoice. For foreign customers can also be a net invoice. Prerequisite is a valid Ust.Indent.Nr. Subject to prior sale. Fgjdop E Dk Hepfx Ab Tok Visit our store and see our other offers. Indicated company names and trademarks are the property of their owners and serve only for identification and description of the products. Deviations from technical data and errors in the description of the article can happen and remain reserved.