Hydraulic cylinder

Herrenknecht Hub 310 mm Kolben Ø 115 mm

Year of construction: 1984, condition: used, Large grinding wheel diameter: 40 mm Small grinding wheel diameter: 5 mm Weight: 0.9 t 2 grinding wheels with flange Fedpfx Aocq Rv Ujkyjgh 8 collets 1 coolant tank Mechanical feed with fixed stop The universal joint for the workpiece drive is worn.

Condition: new, weight max. 10 t workpiece diameter 100 - 3200 mm Fsdpfx Aksf Ep Dioysgh drum diameter 300 x 120 mm feed 100 - 1000 mm/min total power requirement 2 x 0,55 kW

Condition: good (used), 1 used radial drilling machine manufactured by Stimin type GR 820 H No. 773 year 2004 Fsdpjtzctmofx Akysgh Technical data: Drilling capacity 80 mm throat 1600 mm Drill spindle holder MK 6- drill spindle stroke 390 mm Spindle speed, 24 steps 20 - 1400 rpm Clockwise and counter-clockwise rotation Feed rate, 12 steps 0.045 - 1.5 mm/rev Drive 400 V / 14.5 kva Clamping of the arm and drilling unit electromechanical Distance machined machine bed - drilling quill min. approx. 400 mm max. approx. 1800 mm usable machine bed with 4 T-slots 1170 x 2185 mm Coolant device 2 clamping tables Space requirement approx. L 2600 x H 3950 x W 1300 mm Weight approx. 8500 kg

Year of construction: 2000, condition: good (used), Tank & Environmental Protection Wozniack – Certified Specialist Company according to the German Water Resources Act (WHG). Dear Sir or Madam, We offer a 30,000-liter double-walled storage tank for storing liquid fertilizers as follows: The storage tank is equipped with a brand-new, internally installed plastic liner, resistant to the storage of liquid fertilizers. An acoustic leak detection device is mounted externally in a protective box (lockable). The storage tank also has a double-walled steel construction. The plastic inner liner has a general building authority approval. It is therefore suitable and approved for storing liquid fertilizers AHL as well as NOX reduction agents AUS32/AdBlue. Nominal capacity: 30 cubic meters Quantity: 1 Used, but completely overhauled, meaning the container has been cleaned, refurbished, primed, and painted. Color: RAL paint; however, you can also specify your own color preferences at any time. Material: Steel, grade S235JRG2 Documents: Manufacturer's certificate/test certificate according to DIN 6616 D/2 and nameplate Quantity: 1 dipstick Quantity: 1 vent Quantity: 1 filling nozzle, 3 inches, V2A stainless steel, newly installed Quantity: 1 new acoustic leak detection device for the double-walled construction Quantity: 1 ladder Quantity: 1 suction line, 3 inches, V2A stainless steel, newly installed Shape: Cylindrical storage container with feet/console Container dimensions: Length: approx. 6,740 mm Diameter: approx. 2,500 mm Weight: approx. 6,500 kg Storage: Above ground Excellent offer: Liquid fertilizer – AHL tank systems in sizes from 5,000 to 100,000 liters. Water tanks, fire water tanks. Of course, you can also participate in the design of your tank system! All our systems are thoroughly inspected and checked by selected employees in our company. We also offer a cost-effective delivery upon request. Inspection of our systems is possible at any time. Other tank systems for above-ground as well as underground storage are available in all sizes and are for sale on our premises. Have we convinced you with our offer? If you have any questions or requests, please feel free to call us; one of our experienced employees will be happy to advise you. Price/Shipping The price for the tank system applies ex works Warstein, unloaded free of charge. Delivery can be offered at a reasonable cost for an additional fee. Delivery time: Immediate You will receive an invoice with VAT stated. In addition, we purchase existing tank systems and, as a certified specialist company according to the German Water Resources Act (WHG), can professionally empty, clean, dismantle, and remove them. Fgedpfec Nk Dyox Akysh Sincerely, from Warstein Tank & Environmental Protection Wozniack Enkerbruch 2 59581 Warstein

Year of construction: 1984, condition: used, machine/vehicle number: 57051/4, Manufacturer: Rhode & Doerrenberg (May) Model: SS 40 U Serial No.: 57051/4 Year of Manufacture: 1984 Weight: 950 kg General / Technical Data: Used drill grinding machine from German production for 2, 3, and 4-edged tools, in good condition. Diameter range: 5 mm to 40 mm Tool length: 500 mm Point angle: 80° to 160° Clearance angle: 1° 30“ to 10° Grinding wheel: 210 x 127 x 50 mm (cup wheel) Tool body: 2, 3, and 4-edged drills and countersinks Grinding direction: Left and right-hand cutting tools Machine dimensions (l x w x h): 1350 mm x 1100 mm x 1400 mm Power connection / Control voltage: 380 V 50 Hz / 220 V Fjdpfx Aec Nv S Askyogh Motor power / Total power: 2.2 kW / 2.55 kW Accessories / Special equipment: • 2 grinding wheel holders with grinding wheel • 8 collets for drill chuck, manufacturer Forkardt • 6 MK tool holders & drill extensions • Coolant system • Machine documentation & electrical wiring diagram Remarks: The machine is located in our warehouse, connected to power, and can be demonstrated by appointment.

Condition: new, Year of construction: 2024, bore capacity in steel (diameter) 35 mm throat 320 mm bore stroke 150 mm spindle taper MT 4 table-size 500 x 400 mm spindle turning speed range 75 - 3.010 U/min feed range - boring 0,1 / 0,15 / 0,22 / 0,33 mm/U quill stroke 150 mm voltage 400 V total power requirement 1,8 kW weight of the machine ca. 275 kg Fgedswlvlaopfx Akyeh dimensions of the machine ca. 0,70 x 1,00 x 1,95 m - Serial-No.: 138050673 - Electromagnetic feed - Threading device - Machine vice 150 mm - Two clamping screws 14 mm - 9-piece drill cartridge 14.5 mm - 30 mm, MK 2 / MK 3 - Cutting oil spray

Year of construction: 2009, condition: good (used), hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Pressure force: at 250 bar 96 to -Piston diameter: 220 mm -Piston rod: Ø 125 mm -Cylinder tube outside: Ø 260 mm -stroke: 495 mm -Total length retracted center hole: 1195 mm -Piston rod mount: Ø 100 mm Fgodpfx Ajdq U S Iekyeh -Cylinder mount: Ø 100 mm -universally applicable: -Number: 15x cylinders available -Price: per piece -Dimensions: 1360/530/H300 mm -Weight: 364 kg/piece

Condition: used, Year of construction: 1978, Technical details: bore capacity in steel (diameter): 100 mm arm length: 400 - 2100 mm cantilever adjustment vertical: 100 mm spindle taper MT: 50 drill depth: 415 mm spindle stroke: 400 (Skala) mm Fjdpfxju Id Awo Akyegh column turnable: 360 ° column diameter: Ø 500 mm distance drilling head - clamping area: min./max.: 400 / 1.800 mm number of spindle speeds: 12,5 ... 1.600 / 15 step U/min feed: 0,063 ... 2,5 / 15 step mm/U table clamping surface:: L x B: 2.000 x B: 950 mm total power requirement: ca. 35 kW weight of the machine ca.: o. Würfel = 8,0 t dimension machine xH: 3,40 x 1,16 x 3,51 m further information: - drilling spindle travel horizontal 1.700mm Equipment: - incl. drilling cube (horizontal surface: 1000 x 1000 x 500 mm, central bore Ø 35mm; 6 T-slots), (vertical surface: 1,000 x 500mm, 3-T-slots) - control panel - coolant system *

Condition: good (used), Lifting capacity 24t Ø98 x 315mm Stroke 150mm Cylinder Ø 56mm Bore Ø 27mm 238kN Around 130x available Fsdpovwb Sdefx Akyegh Shipping from 10 pieces

Condition: new, Year of construction: 2026, A large and stable radial drilling machine with a large range of revolutions which ensures precise and fast machining. Machine features Large weight and sturdy design ensure stability and vibration-free operation Cube table provides adjustability and easy fixture of workpiece Control panel located at the front of the machine for improved convenience Ground column surface provides easy, precise arm travel Machine equipped with manual head and column arm limiter Large speed range for accurate and quick machining Technical data Maximum drilling diameter 35 mm (cast iron); 30 mm (steel) Distance from spindle to base 360–1300 mm Distance from spindle axis to column surface 260–1300 mm Spindle extension 200 mm Spindle taper MK4 Spindle speed ranges (6): 75, 130, 240, 380, 660, 1200 rpm Spindle feed ranges (3) 0.10; 0.16; 0.25 mm/turn Vertical arm travel speed 1.3 m/min Arm rotation 360° Main motor power 2.2 kW Lifting motor power 0.75 kW Worktable dimensions 510×380×305 mm Fsdpji D Da Aefx Akysgh Machine dimensions 800×1800×2150 mm Weight 1400 kg Default equipment B16 (3-16 mm) Drilling chuck B16/MK4 Drilling chuck mandrel MK4/MK3 reduction Wedge for taper removal The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.