Universal machining center

HERMLE C 600 U

Condition: excellent (used), Year of construction: 2005, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 35,000 m/min, rapid traverse Y-axis: 35,000 m/min, rapid traverse Z-axis: 35,000 m/min, workpiece weight (max.): 200 kg, total length: 500 mm, total width: 400 mm, table load: 200 kg, rotary table diameter: 280 mm, Coolant system Filtration tank HR 410 Handwheel iTNC530 controller 1e owner machine X - Travel: 600mm Y - Travel: 450mm Z - Travel: 400mm A - Axis: 110° B - Axis: 360° Table Length: 500mm Table Width: 400mm Table load: 200 Table Ø: 280mm Feed rate X-Axis: 35000mm/min. Feed rate Y-Axis: 35000mm/min. Feed rate Z-Axis: 35000mm/min. Feed rate A-Axis: 10Degrees/min Feed rate B-Axis: 15Degrees/min Spindle Taper: 40ISO/Bt/Mk Fodpfx Aox R S Smofnjft Power on spindle: 15kW Speeds / ranges: 18000Rpm ATC / revolver: 30 Coolant through spindle / Bar:20 Number of controlled axis: 5 Chip conveyor: Yes Coolantsystem: Yes Length: 3500mm Width: 3500mm Height: 2800mm Weight: 6600kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2019, condition: new, Booth KPZ-4P • Booth Type Closed drive-thru Fjdpfsbxmfnox Afneft • Worksize dimensions 3500 width x 1800 height x 1000 depth • Overall dimensions 3300width x 2300 height x 1800 depth • Power supply Electric • Nominal power 0,69kW x4 • Voltage 380V • Frequency 50-60Hz • Filters 100% Polyester • Filters count 4 • Filters hang type Bagnet type, easy on/off • Filter area 30m2 • Filter cleaning system Pneumatic - Jet Venturi • Ventilator type Aluminium ray rotor . • Air consumption 20,400m3/h • Loudness 74dBa • Doors Double, both side • Inside drive diameter 800mm

Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, Machine parameters: Travels in X, Y, Z axes: Fodpfexyipfox Afnjft 650X450X450 mm Description: The machine is in good technical condition; test runs are possible by prior arrangement. HSK 63. Heidenhain 426/430. - The current condition corresponds to the machine's age, and there are currently no issues. X-axis ball screw was replaced on 5.1.2022. Hydraulics were overhauled on 25.4.2024. - Spindle hours: 41,273, machine hours: 89,892 - Number of axes: 5. Video of the machine available on request.

Condition: excellent (used), Year of construction: 2000, TECHNICAL DETAILS CNC Control: HEIDENHAIN TNC430 X-axis travel mm: 600 Y-axis travel mm: 450 Z-axis travel mm: 450 A-axis travel mm: +/- 110 C-axis degrees: +/- 360 Number of pallets: 1 Table dimensions mm: - Max. table load kg: - Feed rate mm/min X, Y, Z: 20,000 Max. rapid traverse m/min X, Y, Z: 35,000 Spindle speed rpm: 50 - 10,000 Spindle power kW: - Taper type: ISO-SK40 Torque Nm: - Tool changer type: Chain Tool changer positions: 30 Max. tool diameter mm: - Max. tool diameter with adjacent pockets empty: - Max. tool length mm: - Max. tool weight kg: - Coolant tank capacity l.: - Through-spindle coolant bar.: - EQUIPMENT: Zero-point clamping system: EROWA MTS / EROWA MTS RENISHAW OMP60 probe MACHINE DIMENSIONS Length mm: 2,130 Fedpoxak A Hofx Afnoft Width mm: 2,300 Height mm: 2,750 Weight kg: 6,500

Condition: good (used), Year of construction: 2015, Machine is in good condition, parts shown by hand not come. Fsdpowx N Nfjfx Afneft X 1025 mm Y 560 mm Z 600 mm Heidenhain TNC 620, 16.000 rpm HSK 63

Condition: ready for operation (used), Year of construction: 2001, Control Unit Brand HEIDENHAIN Model TNC 430 Main Drive Spindle speed range 15000 Number of axis 5 Movement X-Axis Feed Force 30000 m/min Y-Axis Feed Force 30000 m/min Z-Axis Feed Force 30000 m/min Media Chip conveyor Yes Additional Equipment Oil mist extraction Electronic handwheel Chip flushing gun Machine bed flushing NC swivel table Blow-off device Fodpfx Asx D Iywjfnjft Closed roof 200-liter coolant tank Includes 24 pallets and MTS-Chuck S-P/A clamping device. This 5-axis HERMLE C 600-U + EROWA Robot easy automation was manufactured in 2001. It features a 24-position magazine, extended X-axis of 2010 mm, C-axis rotary table, spindle speed up to 15,000 rpm, and a 30 tool capacity. Includes a chip conveyor and a 200-liter coolant tank. If you are looking to get high-quality automation capabilities consider the HERMLE C 600-U machine we have for sale. Contact us for more information about this machine. Application Types Milling

Condition: excellent (used), Year of construction: 1998, Heidenhain TNC 426 control Travel X/Y/Z: 600/450/450 mm Spindle speed 10,000 rpm Tool magazine for 30 tools, SK 40 Ffodpfx Aswhrfzsfnst

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Milling Machining Center - Vertical / Brand: DECKEL MAHO / Type: DMC 63V / Year of construction: 1999 The machine can be inspected by appointment under power. Well-maintained and very good functional condition. Spindle replacement: 18.03.2022 Spindle hours (03/13/2025): 51.206 h The machine has a Lehmann A-axis and counter bearing (as new). TECHNICAL DATA: Working area: - X-axis: 630 mm - Y-axis: 500 mm - Z-axis: 500 mm Feed/axis drives: - Advancing force X, Y, Z (100 % ED): 6.000 N - Feed rate: 0 - 30.000 mm/min - Rapid feed X, Y, Z: 30 m/min - Diameter ball screw/pitch (X, Y, Z): 40/20 mm Positioning accuracy: - Pmax in X, Y, Z-axis to VDI/DGQ 3441: 0,015/0,010 mm (indirect/direct measuring system) Distance measuring system: - Input unit: 0,001 mm Working spindle: - Drive power (40/100 % ED): 13/9 kW - Torque (40/100 % ED): 83/57 Nm - Speed range: 1 - 10.000 rpm - Tool holder DIN 69 871-A: SK40 - Tool clamping force: 12.000 N Tool magazine: - Tool changing system: Pick-up - Number of magazine positions: 24 - max. Tool-Ø with vacant neighboring spaces: 80/140 mm - max. Tool length: 300 mm - max. Tool weight: 7 kg - Chip-to-chip time: 6,5 sec - Rotational speed/tool magazine: 47 rpm - max. Maximum loading weight of the tool magazine (24 x 3 kg): 72 kg Machine/Working table: - Clamping surface with T-slots DIN 650-14: 800 x 500 mm - Table load (set-up weight): 500 kg - Loading height: 850 mm - max. Workpiece height (at max. tool length): 240 mm EQUIPMENT: - CNC-Control: Siemens 810D powerline - Lehmann A-axis and counter bearing (as new) - Direct measuring system Fodpev Nxbyjfx Afneft - Internal cooling through the spindle, 15 bar - Coolant system (emulsion) - Electronic hand wheel - Chip conveyor - Documentation - CE marking There is no guarantee for correctness and completeness of the technical details and accessoires. - Subject to prior sale -

Condition: used, Year of construction: 2000, travel -x axis 600 mm Fedpsv T Nr Rjfx Afneft travel -y axis 450 mm travel -z axis 450 mm control HEIDENHAIN - TNC 430 turning speeds 10.000 U/min numbers of positions in the tool changer 30 tool taper SK 40 5-axis simultaneous machining center | HERMLE - C 600 U equipped with a 30-tool changer, a swivel axis, and an NC combination table (600 x 370mm / ø 280mm). The machine has approx. 17.754 H spindle hours. Additional equipment: - Swivel axis - NC combination table (600 x 370mm / ø 280mm) - Probe system (SK 40 - RENISHAW) - Tool breakage monitoring The machine is in well-maintained condition, has been used exclusively for educational and training purposes. For further technical details, please refer to the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: C 600 | C600 | C-600 | C600U

Condition: good (used), Year of construction: 1999, HERMLE C600 U 5 AXIS MACHINING CENTRE WITH HEIDENHAIN ITNC430 CONTROL UKUK Table Dimension Ø280mm (4 'T' Slots). Maximum Table Load 300kg. Axis Travel 'X'=600mm, 'Y'=450mm, 'Z'=450mm, 'B'=220° (±110° ), 'C'=360° . Rapid Traverse 30m/min. Maximum Spindle Speed 12,000rpm. Spindle Taper ISO 40. 30 Position ATC. S/No. 12859 (1999). Fodpox A Hgtefx Afnjft

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : HSK63 - Spindle power : 17.5 [kW] - Spindle speeds : 18.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 915 / 500 / 500 [mm] - Rapid traverses rates (X/Y/Z) : 30 / 30 / 20 [m/min] TOOL CHANGER - Tool magazine capacity : 28 TABLE - Table dimensions : Ø 630 [mm] - Maximum weight upon table : 500 [kg] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 26 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3620 x 3160 [mm] - Machine height : 3000 [mm] - Machine weight : 7300 [kg] MACHINE HOURS - Number of working hours : 48894 [h] EQUIPMENT - CNC : Heidenhain iTNC 530 - Coolant tank - Chips conveyor Fjdpoup Hw Eofx Afnsft - Oil mist extractor : ELBARON - Cooling unit : HYDRAC COOLING FLKS 170S/2.3W/TP/400-50/1/14 - Workpiece probe : Renishaw - Tool breakage detection : BLUM

Condition: excellent (used), Year of construction: 1998, operating hours: 148,086 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 35,000 m/min, rapid traverse Y-axis: 35,000 m/min, rapid traverse Z-axis: 35,000 m/min, rotational speed (max.): 12,000 rpm, overall weight: 6,500 kg, coolant supply: 20 bar, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Control: Heidenhain TNC 430 (handles modern trochoidal paths without issues) Year of manufacture: 1998 Basic dimensions (L/W/H): 2.5 x 2.1 x 2.7 m X-axis travel: 600 mm Y-axis travel: 450 mm Z-axis travel: 450 mm A-axis rotation range: +20° / -90° C-axis rotation range: 360° Rotary table diameter: 280 mm Highlights: Tool measurement / workpiece probe / LED machine lighting / HSK63 / V2A stainless steel interior cladding / ICS (internal coolant supply) / chip conveyor / external air with cold air nozzle via M-function / status LED signal lamp Spindle Data Spindle mount: HSK A 63 (12,000 rpm) Tool magazine: 30 positions Feeds and Speeds Feed rate range: 1 - 30,000 mm/min Fedsxz A Nnepfx Afnoft Rapid traverse speed: 35 m/min MACHINE DETAILS Machine weight: approx. 6,500 kg Control on-time: 154,435 h Machine on-time: 148,086 h Program runtime: 49,428 h Spindle hours: 46,014 h Drive hours: 77,927 h 5-axis postprocessor for Fusion 360 included Inspection and demonstration by appointment. Price is net, plus VAT.

Condition: excellent (used), Year of construction: 2001, x-travel 600 mm y-travel 450 mm z-travel 450 mm spindle turning speed range 16000 U/min control HEIDENHAIN TNC 430 Number of axles 5 simultan table rotating 360 ° taper ISO SK-40 table diameter 280 mm rapid traverse 30wer m/min tool change unit 30 -fach weight of the machine ca. 6,5 t dimensions of the machine ca. 3100 x 2400 x 2500 m his HERMLE C600U is in very good condition and available immediately. Hours on: Fodpjvwgm Tjfx Afnoft - Machine ON: 65'656h - Spindle ON: 28'281h Equipment & Description: - Coolant outside with 6bar 3 nozzles - Manual canopy - Electr. heat compensation - Electr. handwheel iTNC - Measuring probe HEIDENHAIN - Blum tool breakage control - Documentation / Operating instructions - NEW air filter system CABARON type: COB-H10-2 (year of construction 2012 never in use) Option: - Div. tool holders ISO SK-40, 109 pcs.

Year of construction: 2001, condition: excellent (used), machine/vehicle number: 00287, Technical data Manufacturer: brown & sharpe Type: DEA Scirocco 101509 Year of manufacture: 2001 Serial number: 00287 Software: PC-DMIS 2019R1 Measuring range Ffjdpfx Afsi Dpggenjt X = 1000 mm Y = 1500 mm Z = 900 mm Measuring table Length = 2280 mm Width = 1145 mm The machine can be modernized with new accessories according to the customer's requirements. Price: on request! Assembly and commissioning possible! We will be happy to provide you with a detailed offer. Note: Our offer is directed exclusively to professional customers. (Changes and errors in the technical data, specifications and prices and prices as well as subject to prior sale).

Condition: ready for operation (used), Year of construction: 2002, operating hours: 28,384 h, functionality: fully functional, machine/vehicle number: 15594, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, swivel angle A-axis (min.): -90 °, swivel angle A-axis (max.): 20 °, TECHNICAL DETAILS Control: Heidenhain iTNC 530 X-axis: 600 mm Y-axis: 450 mm Z-axis: 450 mm Ffedpfx Afsvytgfjnet A-axis rotation range: +20° / -90° C-axis rotation range: 360° Rotary table diameter: 280 mm Spindle data Spindle mount: HSK A 63 Tool changer: 30 positions Feeds and speed Feed range: 1 - 30,000 mm/min Rapid traverse speed: 35 m/min MACHINE DETAILS Machine weight: approx. 6,500 kg Control switch-on time: 64,299 h Machine switch-on time: 61,676 h Program run: 29,320 h Spindle hours: 28,384 h Drive hours: 37,893 hours