Muffle furnace

Heraeus

Condition: excellent (used), I am offering a Heraeus Kendro UT 6 P laboratory oven with a digital Function Line controller. This device is designed for drying, heating, sterilization, and thermal processing of samples in laboratories, research facilities, and industrial plants. The oven is in perfect working order. The stainless steel chamber is clean and in good condition. It is equipped with a grate and guides that allow for adjusting the shelf height. Technical data: Manufacturer: Heraeus / Kendro Laboratory Products Model: UT 6 P Maximum temperature: 250°C Power supply: 230 V / 50–60 Hz Power: 1.27 kW Rated current: 5.5 A Protection class: IP20 Control: digital Function Line panel Stainless steel chamber Forced air circulation for uniform temperature distribution Guedpjz Snfcjfx Afrjh Condition: used, in working order

Condition: new, Year of construction: 2025, Manual operation with our ultrasonic cleaning technology, analog control panel, and temperature control via a digital thermostat. Functions from the PRO series can be added as optional features. We offer volumes from 60 to 7,500 liters to meet all requirements. Tank capacity: 110L External dimensions: 1970x670x970mm Usable dimensions of the tank: 550x350x250mm Gsdpfx Afjf Hqavsrsuh Ultrasonic frequency: 40kHz Ultrasonic power: 1000W

Condition: used, Vötsch Climate testing chamber / temperature and humidity testing chamber Vötsch VCS³ 7034-5 climate testing chamber, water-cooled Temperature range from -70 °C to +180 °C with humidity control Workshop-tested with documented test run and only approximately 3,485 operating hours For sale is a used climate testing chamber from the manufacturer Vötsch Industrietechnik GmbH. The climate testing chamber is suitable for temperature and humidity tests, environmental simulation, material testing, quality assurance, electronics and component testing as well as development, aging and stress tests. The unit features a programmable touch panel control, temperature and humidity control, a large viewing window and a lateral test specimen port. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Type: VCS³ 7034-5 Equipment type: Climate testing chamber / temperature and humidity testing chamber Year of manufacture: 2016 Operating hours: approx. 3,485 h Temperature range: -70 °C to +180 °C Humidity control: available Water-cooled version Test results documented in the workshop protocol: Temperature change rate, heating: approx. 7.65 K/min Temperature change rate, cooling: approx. 7.71 K/min Humidity test at 30 °C / 40 % r.h. Humidity test at 80 °C / 85 % r.h. Refrigerant 1: R404A Refrigerant quantity: 2.50 kg Guodpfozqmx Eox Afreh Max. low pressure: 21 bar g Max. high pressure: 25 bar g Refrigerant 2: R23 Refrigerant quantity: 0.75 kg Max. low pressure: 21 bar g Max. high pressure: 25 bar g Standing pressure: 13 bar g Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Nominal power: 9 kW Nominal current: 20 A Test chamber volume: approx. 335 liters Internal dimensions (H × W × D): 750 × 580 × 765 mm External dimensions (H × W × D): 1,800 × 872 × 1,758 mm Weight: 585 kg Equipment: Programmable touch panel control Temperature control Humidity control Water-cooled version Interior made of stainless steel Large viewing window Test chamber lighting Separate digital temperature and humidity display Test specimen port Ø 125 mm Additional test specimen port Ø 50 mm Front main switch Electrical connection with approx. 3.5 m connection cable Connection for condensate drain / overflow Cooling water connection Connection for demineralized water Compressed air connection Several stainless steel inserts in the test chamber Program operation and manual operation Application areas: Temperature testing Climate testing Humidity testing Environmental simulation Material testing Electronics testing Component testing Assembly testing Sensor testing Quality assurance Research and development Service life testing Aging and stress tests Condition: Used Optical condition according to images Scope of supply: 1x Vötsch VCS³ 7034-5 climate testing chamber Programmable touch panel Stainless steel inserts as shown in the images Accessories as shown in the images Important note: For the safety of our customers, the following work will be carried out on the offered testing and climate systems in advance: 1. Functional test and replacement of any necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection The table or other items that are not explicitly mentioned in the photos are not part of the sale. Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, Heraeus Vötsch Type: VTS 7018-5 Heraeus Vötsch Temperature Test Chamber, Water-Cooled Temperature range: -70°C to +180°C Temperature deviation (temporal): ± 0.1 to ± 0.5 K Gusdsyu Rhgepfx Afrjh Temperature deviation (spatial): ± 0.5 to ± 2.0 K Temperature change rate (cooling): 6.5 K/min Temperature change rate (heating): 7.5 K/min Heating capacity: 4500 W Test chamber dimensions: Width 580 mm, Depth 450 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1280 mm, Height 1575 mm Observation window: Width 300 mm x Height 540 mm Test chamber volume: 190 liters Rated voltage: 3/N/PE AC, 400V ±10 %, 50Hz Rated power: 10 kW, Rated current: 21 A Fuse, on customer side: 32 A, slow-blow Sound level at 1 m distance (free-field measurement): < 63 dB (A) Side access port: 50 cm / 125 cm Chamber is water-cooled Refrigerant: R452A and R23 Weight: approx. 460 kg For your safety as a buyer, please note the following information: The following steps are performed on our offered chambers in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: like new (used), Year of construction: 2023, machine/vehicle number: SN432511, functionality: fully functional, power: 75 kW (101.97 HP), input voltage: 400 V, input current: 108 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 1,340 °C, inner dimension length: 1,000 mm, inner dimension width: 800 mm, inner dimension height: 1,250 mm, total length: 1,800 mm, total width: 1,900 mm, total height: 2,500 mm, overall weight: 2,800 kg, number of chambers: 1, control type: PLC-controlled, actuation type: electric, Equipment: CE marking, documentation/manual, with 12 months warranty -Internal dimensions (w x d x h): 800 x 1000 x 1250 mm -External dimensions (w x d x h): 1790 x 1900 x 2500 mm -Control cabinet (w x d x h): 1200 x 500 x 2350 mm -Controller cabinet (w x d x h): 600 x 900 x 1850 mm -Capacity: 1000 liters -Maximum temperature: 1340 °C -Siemens PLC control system H1700 (100 programs, each with 20 segments) -Nabertherm NCC, computer-aided, extremely user-friendly control system, recording of all parameters. Gjdozbr U Uepfx Afrsuh Recordings can be processed, supplemented with batch data, etc., and archived and printed. -Printer and UPS integrated in the controller cabinet -Automatically generated report after each heating cycle -Thyristor-controlled -2 opposing, lockable doors with safety interlock -5-sided heating -Manual air inlet damper -Motorized exhaust damper -Stainless steel exhaust hood with pipe connection flange -Calibrated control thermocouples for the three heating zones -Temperature accuracy: ± 15 °C from 500 to 850 °C, ± 10 °C above 850 °C, all values according to DIN 17052-1 in the empty working space, without recording -Separate control cabinet -Audible alarm and alarm light -Overtemperature limiter -Power: 75 kW -Oven weight approx. 2320 kg + control cabinet + controller cabinet -DGUV V3 test currently valid with report -Documentation, CE declaration, circuit diagrams The oven is in TOP condition. It has been used for approximately 10 months in a cleanroom for the production of implants and is of high quality (new price 100,000 EUR net) and absolutely clean. We would be happy to offer installation and commissioning as well as training for your employees. Please contact us! We offer new and used industrial furnaces. Inspection in our warehouse upon request! Chamber furnace, furnace, kilns, annealing furnace, firing furnace, hardening furnace, heat treatment furnace, tempering furnace, enameling furnace, drying oven, industrial furnace, ceramic furnace, tempering furnace, sintering furnace

Condition: used, Thermo Scientific   Thermo Scientific Forced Convection Drying Oven UT 6200 F with external temperature control unit Single STW150 temperature control system 85°C   Thermo Scientific Forced Convection Drying Oven UT 6200 F with external temperature control unit Complete laboratory temperature control and drying system   Description – Function & Application   For sale is a professional temperature control and drying system consisting of:   Thermo Scientific / Heraeus Forced Convection Drying Oven UT 6200 F Single water temperature control unit STW 150/1-3-10-K5   The forced convection drying oven ensures uniform temperature distribution in the interior and is ideal for drying, heating, and tempering samples, components or materials.   The heating is carried out via the external water temperature control unit (external heater). This achieves a very stable, indirect, and material-friendly temperature control - without local overheating and with homogeneous heat distribution.   Typical applications:   Laboratory & Research Industry & Production Material testing / component drying Tempering, heating, drying at constant temperature Robust laboratory and industrial quality, reliable and durable.   Unit 1 – Forced Convection Drying Oven:   Manufacturer: Thermo Scientific / Heraeus Type: UT 6200 F   Technical data: Max. temperature: 85 °C Operating voltage: 230 V Frequency: 50 / 60 Hz Current consumption: 0.6 A Power: 0.14 kW Gusdpfxeziy D Ee Afroh Protection class: IP20   Dimensions & Weight (approx.) External dimensions: 895 × 816 × 715 mm Interior: 554 × 644 × 503 mm Volume: approx. 180 liters Weight: approx. 100 kg   Unit 2 – Water Temperature Control Unit:   Manufacturer: Single Temperiertechnik GmbH Type: STW 150/1-3-10-K5   Technical data: Heat transfer medium: Water Connection: 400 V / 3~ / PE / 50 Hz Current consumption: 6.9 A Heating power: 9 kW Apparent power: 4.7 kVA Max. temperature: 150 °C   Dimensions & Weight (approx.) Dimensions: 30 × 75 × 60 cm   Weight: 55 kg   Total:   Complete temperature control and drying system Operation together possible (external heating / external heater) Total weight: approx. 155 kg   Important note: "The table shown in the photos is not part of the sale."   Condition: used   Scope of delivery: (See image)   (Changes and errors in the technical data are subject to change!)   We will be happy to answer any further questions you may have by phone.

Condition: used, Vötsch Type: VCS 7034-5 Water-cooled climate testing chamber Vötsch VCS 7034-5 Test chamber volume: 335 liters Performance for temperature tests Temperature range: -70 to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature gradient: 1 to 4 Rate of change: Cooling: 6.7 K/min Heating: 6.8 K/min Heat compensation at +20°C: 3000 W / at -20°C: 3000 W Temperature calibration values: +23°C and +80°C Performance for climate tests Temperature range: +10 to +95°C Temporal temperature deviation: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Humidity range: 10 to 98% Temporal humidity deviation: ±1 to ±3% Dew point range: -3 to +94°C Heat compensation: 400 W Climate calibration values: +23°C / 50% RH and +95°C / 50% RH Test chamber dimensions: Width 580mm, Depth 765mm, Height 750mm External dimensions: Width 870mm, Depth 1595mm, Height 1775mm Electrical connection: 3/N/PE AC, 400 V ±10%, 50 Hz Rated power: 10 kW Rated current: 21 A Sound pressure level: 64 dB(A) Cooling water consumption: 1.4 m³/h Refrigerant: R-404A / R-23 For your safety as a buyer, please note the following information! The following steps are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) Gsdpfxszg Tx Ro Afrjuh (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, Year of construction: 1998, operating hours: 75,336 h, functionality: fully functional, machine/vehicle number: T62204, Equipment: documentation/manual, TECHNICAL DETAILS - Number of axes: 10 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 25.4 mm - Max. machining length: 200 mm - Spindle speeds: 10,000 rpm - C axis indexing precision: 0.1° COUNTER SPINDLE - Max. bar diameter: 20 mm - Spindle speeds: 10,000 rpm - Spindle power: 3.7 kW - C axis indexing precision: 0.1° - Number of guide bush holders: 2 GUIDE BUSH HOLDER 1 - Number of positions: 5 GUIDE BUSH HOLDER 2 - Number of positions: 5 - Number of driven positions: 4 - Live tooling speed: 8,000 rpm END ATTACHMENT - Number of positions: 4 - Number of driven positions: 4 - Live tooling speed: 6,000 rpm SECONDARY OPERATION - Number of positions: 7 Gedpfew Stndox Afrjuh - Number of driven positions: 3 - Live tooling speed: 8,000 rpm POWER SUPPLY - Supply voltage: 400 V - Total installed power: 14 kW WEIGHT & DIMENSIONS - Machine footprint: 2,270 x 1,650 mm - Machine height: 2,200 mm - Machine weight: 3,500 kg EQUIPMENT - CNC: Fanuc - Driven tool motor at: S2, S3, S5 vertical/horizontal - Rotating guide bush - Parts catcher - Workpiece ejection - Coolant tank - Bar loader: ROBOBAR SSF

Condition: used, Vötsch Type: VCS 7034-5 Water-cooled climate testing chamber Vötsch VCS 7034-5 Test chamber volume: 335 liters Performance for temperature tests Temperature range: -70 to +180°C Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature deviation: ±0.5 to ±2.0 K Temperature gradient: 1 to 4 Rate of change: Cooling: 6.7 K/min Heating: 6.8 K/min Gusdpfx Aozg Twgefrsh Heat compensation at +20°C: 3000 W / at -20°C: 3000 W Temperature calibration values: +23°C and +80°C Performance for climate tests Temperature range: +10 to +95°C Temporal temperature deviation: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Humidity range: 10 to 98% Temporal humidity deviation: ±1 to ±3% Dew point range: -3 to +94°C Heat compensation: 400 W Climate calibration values: +23°C / 50% RH and +95°C / 50% RH Test chamber dimensions: Width 580mm, Depth 765mm, Height 750mm External dimensions: Width 870mm, Depth 1595mm, Height 1775mm Electrical connection: 3/N/PE AC, 400 V ±10%, 50 Hz Rated power: 10 kW Rated current: 21 A Sound pressure level: 64 dB(A) Cooling water consumption: 1.4 m³/h Refrigerant: R-404A / R-23 For your safety as a buyer, please note the following information! The following steps are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, Heraeus Vötsch Type: VTS 7034-5 Heraeus Vötsch Temperature Test Chamber, Water-Cooled Temperature range: -70°C to +180°C Temperature deviation (temporal): ± 0.1 to ± 0.5 K Temperature deviation (spatial): ± 0.5 to ± 2.0 K Temperature change rate (cooling): 5.0 K/min Temperature change rate (heating): 6.5 K/min Gusdpfx Afszg Tp Njrjh Thermal compensation at +20°C: 3000 W Thermal compensation at -20°C: 3000 W Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Test chamber volume: 335 liters Rated voltage: 3/N/PE AC, 400V ±10%, 50Hz Rated power: 10 kW, Rated current: 21 A Sound level at 1m distance (free-field measurement): < 69dB (A) Side access port: 5.5 cm / 12.5 cm The chamber is water-cooled. Refrigerant: R-404A and R23 Weight: approx. 570 kg For your safety as a buyer, please note the following information: The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run, which is monitored with calibrated equipment. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: excellent (used), functionality: fully functional, Gas boiling kettle Gujdpfx Asv Urudofrjh Brand Spako Capacity 1100l Voltage 230V 50Hz Basket included

Condition: used, Heraeus Vötsch Type: VTS 7034-5 Heraeus Vötsch Temperature Testing Chamber, Water-Cooled Temperature range: -70°C to +180°C Temperature deviation (temporal): ± 0.1 to ± 0.5 K Temperature deviation (spatial): ± 0.5 to ± 2.0 K Temperature change rate (cooling): 5.0 K/min Temperature change rate (heating): 6.5 K/min Heat compensation at +20°C: 3000 W Heat compensation at -20°C: 3000 W Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Test chamber volume: 335 liters Rated voltage: 3/N/PE AC, 400V ±10%, 50Hz Rated power: 10 kW, Rated current: 21 A Sound level at 1m distance (free-field measurement): < 69dB (A) Side access: 5.5 cm / 12.5 cm Chamber is water-cooled Refrigerant: R-404A and R 23 Gjdpszg Tp Aefx Afrjuh Weight: approx. 570 kg For your safety as a buyer, please note the following information: The following steps are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers undergo a test run, which is monitored with calibrated devices. Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, Vötsch Type: LTU 60/60 Heraeus Vötsch dryer for coating materials Maximum concentration of flammable substances: 40% of the lower explosion limit (LEL) Maximum temperature of the heating surface: over 750 °C Device description: Technical data: Internal volume (usable volume): 0.216 m3 Internal dimensions: width 600 mm, height 600 mm, depth 600 mm External dimensions: overall width 796 mm, height 1725 mm, depth 850 mm Load capacity: Total roller track capacity: 55 kg Loading height above the installation floor: 820 mm Weight (net): 275 kg Minimum exhaust air flow rate: 96 m3/h Purge time (5 air changes): 90 seconds Increased recirculating air flow rate: 33 m3/h Total steam volume: 0.414 m3 Sound pressure level (according to DIN 45635): < 70 dB(A) Gusdpfx Aszg Tpvsfroh Cut-out temperature: Temperature limiter (TL) fixed setting: 300 °C Adjustable temperature selector (TS) adjustable above the nominal temperature: 20 Temperature safety class (according to EN 60519-2) Temperature limiter (TL): 1 Adjustable temperature selector (TS): 2 Nominal temperature: 200 °C Electrical data: Rated voltage / frequency: 400V, 3/(N)PE, AC 50/60 Hz Rated current: 12.0 A Rated power: 6.0 kW Connected load: 7.0 kW Weight: 275 kg Condition: used Scope of delivery: (See picture) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have by phone.

Condition: used, In this offer you purchase a used dental 3D scanner ‘CADstar CS Neo’ Object of sale: 1 x CADstar CS Neo with the following equipment: incl. calibration body incl. holder + arti base incl. PC Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! For further information you can of course also contact us personally. Godpjt H Eudofx Afreuh

Condition: used, Vötsch Type: LTU 60/60 Heraeus Vötsch dryer for coating materials Maximum concentration of flammable substances: 40% of the lower explosion limit (LEL) Maximum temperature of the heating surface: over 750 °C Device description: Technical data: Internal volume (usable volume): 0.216 m3 Internal dimensions: width 600 mm, height 600 mm, depth 600 mm External dimensions: overall width 796 mm, height 1725 mm, depth 850 mm Gusdjzg Tppspfx Afrsh Load capacity: Total roller track capacity: 55 kg Loading height above the installation floor: 820 mm Weight (net): 275 kg Minimum exhaust air flow rate: 96 m3/h Purge time (5 air changes): 90 seconds Increased recirculating air flow rate: 33 m3/h Total steam volume: 0.414 m3 Sound pressure level (according to DIN 45635): < 70 dB(A) Cut-out temperature: Temperature limiter (TL) fixed setting: 300 °C Adjustable temperature selector (TS) adjustable above the nominal temperature: 20 Temperature safety class (according to EN 60519-2) Temperature limiter (TL): 1 Adjustable temperature selector (TS): 2 Nominal temperature: 200 °C Electrical data: Rated voltage / frequency: 400V, 3/(N)PE, AC 50/60 Hz Rated current: 12.0 A Rated power: 6.0 kW Connected load: 7.0 kW Weight: 275 kg Condition: used Scope of delivery: (See picture) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have by phone.