Scanning head (28260)

Heidenhain lida 20/100

Condition: good (used), Year of construction: 2000, gear diameter: 449 mm, Equipped with: Fanuc 150MB CNC Control Dry Cutting Cutter Shroud Chip Evacuation System Auto Doors Hydraulic System Lubrication System Work light Stack Light Specifications: Largest Speed Ratio: 10:01 Work Area (Continuous): Largest Depth of Teeth: 15.24 mm Largest Width of Tooth Face: 50.8 mm Work Area Axis: Horizontal Movement X Axis: -114 - 178 mm Vertical Movement Y Axis: -178 - 190 mm Movement of the Carriage Baseplate Z-Axis: -10.16 - 500 mm Workpiece Headstock Swiveling Range B-Axis: -3 - 90 Degree Maximum Distance Machine Center to Spindle Side: 165 mm Number of Teeth: 5-200 Inclusive Njderuakgjpfx Af Solg Max. Gear Pitch Dia. of Typical 35 Deg. Spiral Angle Gear Using Max. Cutter Dia. 12" Cutter at the Following Ratios: Face Milling 1 x 1 - 13.5" - 342.9mm 2 x 1 - 16.0" - 406.4mm 5 x 1 - 17.7" - 450.0mm Face Hobbing (210mm Dia. Cutter) 1 x 1 - 10.560" - 268.22mm 2 x 1 - 10.286" - 275.00mm 5 x 1 - 11.810" - 300.00mm Milling Head Diameter: Helixact: 100,125,169,200,250,320mm Continuous Gumption Procedure, Teichloroethylene: 102 - 210 mm Workpiece Spindle: Drilling of Large Diameters: 5 3/64" Cone Upward Gradient on 304.8 mm (1 Foot): 21/32" Deep One of the Cone: 5.29" Diameter of the Whole Spindle Perforating: 3.35" Speeds: B-Axle Workpiece Headstock Drag Axis: 30 Degrees A-Axle Workpiece Spindle Number of Revolutions: 0 83 min-1 X-Axis Horizontal: 80 mm/sec Y-Axis Vertically: 80 mm/sec Z-Axis Carriage Baseplate: 80 mm/sec Space Requirement L x W x H (Approximate): 4.75 x 3.40 x 2.54m / 188" x 134" x 100" Machine Weight (Approximate): 10980 kg / 24,156#

Year of construction: 2020, condition: new, 1000l/h Nljdpfx Aocx Smbof Seg Stainless steel frame on 4 adjustable feet Minimum / Maximum Level sensor in the pressure tank Stainless steel pressure vessel The product is pressed through a multi-nozzle head in the tank ; Product Pump: Inlet check valve of the product Sight glass at the inlet of the product CO2 pressure control valve for installation on the CO2 bottle Sight glass in the pressure vessel Max. Pressure : 6 bar incl . electronic control incl . booster pump

Year of construction: 1990, condition: used, machine/vehicle number: 9072492, nominal capacity: 100 kVA throat: 500 mm spark plug air gap: 330 - 500 mm Nlodpfx Aoz H Dyof Sjg electrical connection: 400 V kW space needed: 700 x 1420 x 2000 mm weight: 750 kg

Condition: used, Dough rolling and shaping machine, combination rolling machine, rolling machine -Roll width: approx. 600 mm -Rolling thickness: from 0.3 - 30 mm -with round and long wire type: SR0 -flour container -16 A-CEE plug -Connection: 380 V, 0.75 kW -The rolling machine is mobile Nodpfx Aeb A Iciof Solg -Dimensions: 1900/1250/H1900 mm -Weight: 430 kg

Condition: used, Year of construction: 2006, Technical details: max. wheel diameter: 300 mm max. module: 7 weight of the machine ca.: 15 t table turning speeds: 100 U/min table diameter: 180 mm hob turning speeds: 750 U/min max. hob diameter: 300 cutter length max.: 230 mm Nsdsyz Sd Rjpfx Af Solg Liebherr LC300 with loading automation Machine including counter holder The machine used to work with emulsion *

Year of construction: 2003, condition: ready for operation (used), A CNC twin-spindle lathe Gildemeister with a Y-axis is available. Bar capacity: 32mm, tool stations: 2x12, speed main and sub-spindle: 8000rpm, control: Siemens Sinumerik 840D Powerline, operating hours: 39426h, spindle hours: 25529h. Including coolant system, tools and short bar loader 1500mm Iemca Vip 80E. Documentation available. On-site inspection is possible. Expected to be available starting end of April 2026. Nodpfx Ajygw Svof Sjlg

Condition: excellent (used), CHIRON DZ 18.2 KW, YOM 2012 Control: Fanuc 31i Path: X / Y / Z 630 x 520 x 400 mm, Pallet changer 2x 940 x 470 mm, 2 spindles Spindle distance 320 mm, 2×32-fold tool changer Nodpfx Afeuviiwj Selg SK40 tool Max. Spindle rotation 10,000 rpm

Condition: excellent (used), Year of construction: 2012, Control: Fanuc 0i-TD Equipment: - various tool holders - various driven tools - C-axis, driven tools Max. turning diameter: Ø 500 mm Njdpfx Afey Dqb To Solg Max. turning length: 600 mm Bar capacity: Ø 75.5 mm Spindle speed: 3500 rpm Spindle nose: A2 - 8 Machine weight: 6,700 kg

Condition: used, Year of construction: 1972, Max. pulling force: 10 tons Nlodpfecdtnhjx Af Sog Max. stroke: 1250 mm Max. cutting speed: 10 m/min Max. return speed: 25 m/min Number of die positions: 3 Throat depth: 470 mm Distance between die positions: 125 mm Table: 400 x 400 mm Special equipment: Chip removal via a permanent magnet chip conveyor 1 hydraulic unit, 1 work platform, electrically controlled hydraulic ram and end-piece holder, automatic feeding device

Year of construction: 1990, condition: used, machine/vehicle number: 90030003, table size: 500 x 1200 mm movement x: 1000 mm movement y: 550 mm movement z: 600 mm spindle taper: ISO 40 spindle turning speed range: 60 - 2700 rpm spindle drive: 10 kW electrical connection: 380 V, 20 kVA kW space needed: 3200 x 2800 x 2650 mm weight: 7,3 t Nodpfx Ao Npwfsf Selg