Heidelberg CD102-4 (2001)

Heidelberg CD102-4

Year of construction: 2007, condition: good (used), • Model: BOBST Autoplatine® SPanthera 106 LER • Machine Type: Automatic flatbed die-cutting machine with stripping and blanking • Manufacturer: BOBST • Category: High-performance die-cutter for folding carton & packaging • Year of Manufacture: 2007 • Production Status: "Machine under power" Fodoxzr Hpjpfx Ac Nsfu _____ Format & Substrate Capabilities • Max. Sheet Size: 760 × 1,060 mm • Min. Sheet Size: approx. 350 × 400 mm • Max. Cutting Size: 745 × 1,055 mm • Gripper Margin: approx. 8–10 mm • Paperboard Thickness: 0.1 – 2,000 g/m² (from paper to heavy board) • Corrugated Board: up to N-flute / F-flute (depending on tooling) • Max. Cutting Pressure: up to 260 t (BOBST Autoplatine standard) _____ Production & Performance • Maximum Mechanical Speed: up to 9,000 sheets/hour • Automatic Register System: Included • Blanking Capability: Yes (LER = Logistics, Extraction, Removal = full blanking section) • Stripping Section: Fully automatic 3-frame stripping • Non-Stop Functionality: o Non-stop feeder (continuous pile logistics) o Non-stop delivery (automatic pile change)

Condition: used, Year of construction: 2006, SAKURAI OLIVER 475 SDW Straight machine 4 colors high pile Max speed 15.000 sheets/hours Fodpoxuu Rqsfx Ac Njfu Max paper size: 600 x 790 mm Min paper size: 260 x 400 mm Paper thickness: 0,04-0,6 mm Max impres size: 585 x 785 mm Anti-Static Steell plate in feeder and delivery Pneumatic feeder table Ultrasonic Double Layer Detector SAS - Sakurai Auto Set - Preset (automatic adjustment of pressures and size) SPC - Automatic plate change POD - Interactive Diagnostic Screen SCCII - Control desk (Inking, dampening, Cincunferential, axial and lateral registration, day light illumination) QSS Fast job change OLIVERMATIC continuous dampening Double diameter of printing and transfer cylinders Automatic Print and Rubber Cylinder Washer Chromed cylinders Pneumatic Compressors Powder spray Sheet de-curler Tools, documentation In production Free of damage

Condition: good (used), Heidelberg S Cylinder 54x72 Ffsdpfx Acsybba Hs Nsu

Condition: ready for operation (used), Year of construction: 1997, 8-Farb-Bogen-Offset Fjdjygwbdopfx Ac Nefu 8-col.sheet-fed offset presses Built in 1997 Size max 520 x 740 mm min 210 x 280 mm Image area max 510 x 740 mm Speed max 15.000 c/h Pile height feeder 945 mm Pile height delivery 1.000 mm

Condition: used, Heidelberg KS - cylinder press Technical data: Format: 38 x 52 cm Ffsdpfxsyfd Uue Ac Nju

Condition: used, Letter Press Cylinder DIE Cutter Heidelberg KSB Buchdruckzylinder / Letter Press Cylinder DIE Cutter Heidelberg KSB Year 1962 - Serial-No. KSB 308003 Papierformat / Size min. 125 x 150mm - max.: 400 x 570mm Druckgeschwindigkeit / Speed min. max. 5.000 sph Punching pressure: 60T Weight approx. 5.000kg3 Mit Druckwerk / With Ink Unit Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include fram Fedpfxoyfhthj Ac Nsfu Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Year of construction: 1989, condition: excellent (used), Offer without obligation Automatic Diecutting Machine Make: BOBST Autoplatine Model: SP-130-E Format: 1,300 x 920 mm Year of manufacture: 1989 Technical Data: - Maximum format: 1,300 x 920 mm - Minimum format: 580 x 450 mm Ffedpfx Acsygv Ice Nju - Material: Paper/Cardboard: 80 – 1,000 g/m² Cardboard: 250 – 2,000 g/m² E+B Flute: max. 4 mm - Cutting Pressure: 500 t - Maximum Speed: 7,000 sheets/hour - Automatic diecutting machine with stripping station - Automatic high-pile feeder - High-pile delivery - Diecutting plates - Frames - Quick-action frame change system - Complete with accessories - Machine is in working order and in good condition - Video available on request Price: Upon request Delivery: FCA Availability: Immediate

Condition: good (used), Iijima’s excellent, fast-running JF-1030, year of manufacture 1991, modified to Bobst stripping tooling Machine number: 8061 Year of manufacture: 1991 Stripping station made compatible for/with Bobst stripping pins and mounting rails Sector segment now driven by a dual set of cam gears instead of the previous triple system, resulting in smoother and vibration-free improved carriage operation. Chains replaced in May 2023 Gripper carriages have been repaired where needed but not replaced; current register tolerance at the front lay with rigid board types is < 0.15mm Electromagnetic clutch (24 VDC, Warner) replaced in May 2023, as well as all roller bearings on this shaft, including those in the casing just before and after the worm gear. Oil seals replaced Oil casings flushed and thoroughly cleaned for conversion from mineral to fully-synthetic oil. Absolutely no foaming, quieter operation. Dismantling as of 23/12/2025; then available for sale ex-warehouse Van Rooij For the end user: can be supplied including installation, transport, and warranty. Other specs according to manufacturer’s brochure; Technical Specifications – Flatbed Die Cutting Machine Materials - Paper from 80 g/m² - Solid fibre board / cardboard up to 2000 g/m² - Corrugated board up to 4 mm, depending on material quality and cutting layout Sheet Sizes & Formats - Maximum sheet size: 750 × 1050 mm - Minimum sheet size: 350 × 400 mm - Maximum cutting form size: 745 × 1070 mm - Maximum cutting surface: 730 × 1030 mm - Inside chase dimension: 750 × 1050 mm Performance - Maximum cutting pressure: with maximum sheet size - Maximum speed: up to 5,000 sheets/hour - Gripper margin: adjustable - Standard rule height: 8 – 12 mm Pile Data Feeder pile: - Height (incl. pallet): 1,200 mm - Weight (incl. pallet): 1,000 kg Delivery pile: - Height (incl. pallet): 1,080 mm - Weight (incl. pallet): 1,000 kg Auxiliary piles: - Feeder auxiliary pile height: 450 mm - Feeder auxiliary pile weight: 450 kg - Delivery auxiliary pile height: 800 mm - Delivery auxiliary pile weight: 800 kg Machine Dimensions & Weight - Length without feeder: 4,540 mm - Length with feeder: 5,810 mm - Width: 2,350 mm - Height: 2,100 mm - Machine weight: 15,000 kg - Feeder weight: 1,000 kg Electrical & Air Requirements - Power supply: 3-phase AC - Main motor output: 15 kW Fedpfx Ajx Ndu Dec Nofu - Machine connected load: 32.4 kVA - Required compressed air: 6 bar - Air intake volume: approx. 30–50 l/min Additional Information - Heavy-duty industrial construction - Designed for continuous professional die-cutting production - Specifications subject to alteration

Year of construction: 1984, condition: good (used), BOBST I 130 ER Automatic Die-Cutting Machine Year of manufacture: 1984 2. Sheet Formats Maximum sheet size: Fedpfx Aeycv Dvec Nofu 920 x 1,300 mm Minimum sheet size: 450 x 580 mm Working format: – Max. 890 x 1,270 mm (open chase) – Max. 900 x 1,300 mm (closed chase) 3. Material Specifications Maximum board thickness: 1.5 mm (cardboard) Minimum grammage: 90 g/m² Gripper margin: 10 mm 4. Chase Sizes – 915 x 1,300 mm chase without bar – 840 x 1,300 mm chase with bar 5. Pile Heights (Non-Stop Operation) Feeder pile height: Max. 1,500 mm with pallet Delivery pile height: Max. 1,400 mm with pallet Maximum pallet size: 900 x 1,300 mm 6. Equipment and Features – Suitable for carton and paper processing – Not suitable for corrugated board – Stripping possible using stripping frame and separation grid – EMS side lay system for alignment according to printed marks

Condition: ready for operation (used), Year of construction: 1982, functionality: fully functional, machine/vehicle number: 125.048, year of last overhaul: 2021, type of input current: three-phase, punching force: 320 t, overall weight: 13,000 kg, input voltage: 380 V, input frequency: 50 Hz, input current: 36 A, WUPA PS 4.3 Automatic Die-Cutting Machine & Embossing The machine is of solid German manufacture, designed for precise embossing and die-cutting operations in industrial production. Factory-upgraded at the original WUPA plant, improving performance and reliability. Suitable for cardboard, packaging, and paper processing industries. Technical Specifications: Model: WUPA PS 4.3 Machine No.: 125.048 Power: 18 kW Current: 36 A Voltage: 380 V / 50 Hz / 3-phase Max. strokes per hour: 7,000 cycles/h Max. sheet size: 800 × 1120 mm Min. sheet size: 360 × 500 mm Max. punching pressure: 320 t Cutting height: 3.2 mm Adjustable gripper margin: 8–14 mm Fodpfxexqgckj Ac Njfu The machine was shut down in working condition and is currently not in production. All functions are operational, and the machine can be inspected under power. Location: Işıkkent, İzmir, Turkey. Delivery terms: Ex-works (machine to be collected from İzmir, Turkey) Inspection: Possible upon appointment. You can contact me via Whatsapp.