HAHNDORF REWK 86/14

HAHNDORF REWK 86/14

Condition: ready for operation (used), Year of construction: 2007, A Hahndorf keyway slotting and broaching machine is available. Stroke range slotting: 60mm-300mm, max. slot width slotting: 34mm, max. slotting length: 300mm, max. slot width broaching: 14mm, max. broaching tool length: 640mm, max. cutting speed forward/return: 3m/3m/min, weight: approx. 300kg. Documentation available. On-site inspection is possible. Bwsdpfxox Ih Das Abboh

Condition: used, functionality: fully functional, total height: 1,715 mm, total width: 735 mm, total length: 1,475 mm, power: 3.3 kW (4.49 HP), overall weight: 3,300 kg, Forging hammer is in excellent condition and could be checked under power at any time. Nominal mass of drop parts, kg 75 Impact energy, kj 1,4 Max number of blows per minute 210 Working zone daylight, mm 300 Die impression size, mm 130 x 63 Motor capacity, kW 3,3 Hammer dimensions, mm 1475 x 735 x 1715 Hammer weight with anvil block, kg 3300 Bwodpjxwuv Ejfx Abbsh

Condition: used, Technical details: number of controlled axis: 6 Bwedpfeu Nwfbsx Abbjh workpiece weight: 20 t operating time: 4290 h control: YASKAWA total power requirement: 35 kVA Total weight, approx.: 2000 kg dimensions L x W x H: Roboterschweißanlage: 2,7 x 1,1 x 2,0 m dimensions electric cabinet: L:700 x B:800 x H:2000 mm Robot specifications: -6 different directions of movement -payload max. 20kg -working curves: turning curve=1717mm, turning height=1417mm; turning width=2072mm -rotation axis arm: S-axis rotate=+/-180°, L-axis lower arm=+1550° / -110°; U-axis upper arm=+255° / -165° -rotational axes wrist: R-axis roll=+/-200°, B-axis pitch-swivel=+230° / -50°, T-axis rotate=+/-360° -rotational axis speed: S-axis and L-axis = 170°/s; U-axis 175°/s; R-axis and B-axis 355°/s; T-axis 525°/s -permissible torques: R-axis and B-axis=39.2 Nm; T-axis 19.6 Nm Welding equipment specifications: -Fronius, TIG welding, (DC and AC), 3 A/10.1 V - 300 A/22.0 V, water cooling, IP23 protection class. Table top unit specifications: -Table support Ø 600mm, rotate 360°, swivel 90° each right/left. Details of the wire feeder: -Fronius, type KD 7000, feed 0,2 - 22m/min., protection IP23, voltage U1 230V Manual control unit Control cabinet i.D. *

Condition: reconditioned (used), Robot welding machine with 2 m two-station turner. Offered is a robot welding machine from the company Yaskawa Motoman incl. RM2-250 turner Safety engineering Robot UP20 XRC nozzle cleaner etc. The system can be set up and put into operation by us. There is also the possibility of instruction and training. The plant is prepared according to customer requirements We are YASKAWA system partner and offer you the complete service for your Motoman robot and your systems. Bwsdpfx Abod Tfb Nobjh

Condition: used, The Mubea tools shown are not sold in their entirety. You can tell us what kind of punches and dies you need, so that we can put together an individual range for you. Bedpfx Abof Srpcjbewh

Condition: refurbished (used), Wood waste and bark shredder ERJO. Completely renovated. Yan knives and counter knives installed. Bodsl Sli Depfx Abbewh

Year of construction: 2021, condition: ready for operation (used), Robot travel path: 5000mm, arm length: 2500mm, lift: 1000mm, spin radius: 2200mm, L-manipulator load capacity: 2000kg, lift velocity: 0,85m/min, swing speed: 1,7/min, turn speed: 6/min. Roboter type: IGM RTE 497-S in hanging position, control: full digital PC-Robotcontrol, Type RCE, software: WIN 10 & Linux based System + igm Robotsoftware K6, welding process: 135 (GMAW), single-wire, Ø1,2mm, welding power source: digital Invert Welding Power Source TPS 500i (500A at 40% duty cycle), robot periphery: rotating boom for floor installation with 2,5m boom length, number of working stations: 1, working station: 3-axis L-Manipulator with lifting device with 2t nominal load capacity, security Technology: Pistol-Security-Shut-down in wrist axis, emergency Stop on Handtablet, on Manipulators and Control Panel, three-coloured warning light for the operating Status partition, security Door. machine is complete, no defects known, documentation complete, was maintained regularly. An on-site inspection is possible. Bwedpfx Ajwc A Rdjbbsh

Condition: used, Year of construction: 2016, functionality: fully functional, working width: 2,000 mm, wire diameter (max.): 6 mm, type of input current: three-phase, operating speed: 142 mm/s, mesh size: 9,999 mm, continuous power (apparent): 833 kVA, We offer a used Schlatter MG600/MG24.4/10Sp-AC mesh welding machine, model year 2016. Type: MG600/MG24.4/10Sp-AC Serial number: 4885.31609 Year of manufacture: 2016 Rated primary voltage U1N: 400 V Rated secondary voltage Ua: 230 V Primary phases: 3 ~ Bsdpfx Absyaqzqjbswh Secondary phases: 1 ~ Frequency: 50 Hz Rated apparent power Sp: 833 kVA Rated primary current I1,p: 1202 A Primary short-circuit current I1cp: 50 kA Secondary short-circuit current I’acp: 10 kA If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 1967, operating hours: 4,336 h, I sell a decent massive pipe bender in very good condition Weight of the bender 4.5T+ about 1T wheels to work. Bwjdpfeudlymsx Abboh

Condition: new, table diameter 1000 mm table load 0,6 t Bedpfx Abjfv Aw Eobswh swivelling range 0 - 90 Grad turning speeds 0,1 - 1,25 U/min max. torque on the faceplate 900 Nm table pass 200 mm welding current 500 Ampere total power requirement 0,37 + 0,75 kW weight of the machine ca. t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical.