Stationary extraction unit, chip extraction

Höcker Polytechnik Typ MultiStar JP5

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, working width: 600 mm, input voltage: 400 V, overall weight: 3,560 kg, workpiece height (max.): 170 mm, The fast deburring machine for deburring, rounding and finishing steel cut parts up to 600 mm wide. This Q-Fin deburring and finishing machine was developed especially for applying a large radius of up to 2 mm on steel sheet. With the SER600 Super Edge Rounder from Q-Fin it is possible to deburr, grind, edge break, round off, remove slag, remove oxide skin or apply a line finish to sheet metal up to 600 mm wide. A combination of these operations is also possible. The throughput of the SER600 is 3 to 5 times higher than comparable machines. This new 2024 machine is equipped with magnetic support, making it suitable for processing steel cut parts and other magnetic materials. This machine is equipped with as many as 5 machining stations. Easy operation through an HMI touch screen on the front of the machine. The first station of the SER600 consists of a grinding unit. The grinding belt of this unit removes burrs and/or burn-in points from the product surface. If you have no burrs, you can leave the grinding belt off or remove them. It is also possible to apply a line finish to your product with a finer grinding belt or finish with a scotch-brite belt. The second and the third station consists of the disc brush unit containing 4 oscillating disc brushes. The fourth and the fifth station consists of 2 round brushes, rotating counterclockwise and clockwise. With the brushes you remove the sharp edges of the product by breaking the edges or, by the unique combination of two brush systems, edge round them with a radius up to R=3 mm. Klsdpfx Ajl Dw D Eoh Njl The installation of special brushes makes this SER600 with magnetic system also very suitable to remove the oxide skin of steel products or slag from plasma cut products. We sell the combination with a WES6000 wet working grinding dust extraction system as 'SER600 Set'. The WES6000 was developed by Q-Fin to extract grinding dust safely and without pressure loss. This fully stainless steel extraction system is a wet-acting system that extracts grinding dust from stainless steel, steel and aluminum, eliminating the risk of fire and explosion. According to Q-Fin, it is the safest, easiest and most durable way to extract grinding dust. No more grinding dust in the air and/or work environment with the WES6000. At this moment we have two SER600 machines in stock: 1x new (built year 2025) 1x used for only a few months; as new. built year 2024. Both machines can be viewed by appointment in Bergeijk. Both machines have a 1 year warranty on construction and all non-wearing parts. We can also provide on-site installation of the SER600 + WES6000) including training for the operators. - Connected load SER600 machine: 400 V, 50 Hz, 32 A, 16 kW - Dimensions: 3640 x 1585 x 2085 mm (L x W x H) - Weight: 3560 kg

Condition: excellent (used), Year of construction: 2015, Pressing force: 320 tonnes Number of axes: 4 Kledpfexzpt Tsx Ah Njl CNC crowning, ABC option Bending length: 4 m

Condition: good (used), Year of construction: 1992, Single-piece sanding machine sanding from top and bottom electric height adjustment with digital display continuously variable feed speed star/delta starter pneumatic belt tensioning main switch sanding belt oscillation finishing brush unit top and bottom, manual height adjustment Working width: 190 mm Working height: 4 - 150 mm Min. workpiece length: approx. 280 mm Abrasive belt dimensions (L x W): 1850 x 200 mm Feed speed: 5 - 25 m/min Installed power: approx. 14 kW Extraction port diameter: 2 x 180 mm Dimensions (L x W x H): 2000 x 1000 x 2050 mm Weight: approx. 1800 kg Incl. infeed and outfeed roller conveyor (L = 1600 mm, non-driven) Note on used machines: • Technical data subject to errors and prior sale. • Quoted prices are ex-works – loaded free of charge! • The machines have been cleaned and function-tested. • All machines are sold as inspected, with no claims to warranty. Buyers are welcome to inspect machines at the location. Kljdpowyda Ujfx Ah Nsl • Special agreements are only valid in written form. (We answer inquiries only when your address and telephone number are provided!)

Condition: new, Year of construction: 2026, functionality: fully functional, throat depth: 1,200 mm, empty load weight: 2,000 kg, table width: 1,200 mm, Veneer Splicer with Integrated Gluing System Manufacturer: Fisher & Rückle Model: IMPETUM 1200 (2025 Model) Includes 4 mm Veneer Thickness Conversion Kit For the quick and easy conversion of the IMPETUM for processing veneer thicknesses up to 4 mm. The conversion kit includes a foot pedal for manual triggering of veneer infeed. For gluing and producing seamless lengthwise joints of parallel-joined veneer strips in a single operation, using standard urea glues. Technical specifications: - Veneer strips must not show extreme tension or waviness. - Veneer strip length (with the grain): 380 - 4000 mm - Veneer strip width (across the grain): 45 - 1200 mm - Veneer thickness: 0.4 - 1.5 mm (up to 4 mm with conversion kit) Kljdpoxd Apmefx Ah Njl - Feed speed: 5 - 50 m/min - Throughput speed (practical average value): approx. 20 - 30 m/min - Heating zone length: 1000 mm - Max. heating temperature: 200 °C - Throat depth: 1200 mm - Working height: approx. 960 mm Glue pot capacity: 150 g Glue type: Urea glue Glue pot cooling: Water cooled Features: - Storage of machine settings for recurring orders. - Separate electric drives for chain drive and glue application. During pauses, the chains can be stopped to prevent wear, while the glue in the pot remains in motion to prevent lump formation. - Glue is applied only to the newly fed veneer strips, significantly enhancing joint quality. - Robust, virtually maintenance-free stainless steel transport chains. - Six heating zones for individual temperature settings. - Infinitely variable assembly speeds. - Touch panel with displays for temperature, speed, and pressure. - Easily accessible glue pot for fast refilling or cleaning. - Extended glue usability thanks to integrated glue pot cooling. - Glue dosage system ensures consistent and even glue application without excess glue. Connected load: approx. 3 kW Compressed air: 6 bar Compressed air consumption: 5 NL/min Shipping dimensions: approx. 2300 x 2300 x 1850 mm Weight: approx. 2,000 kg

Condition: used, 2 fans: 2/ 0.75KW Compressor: 5KW Water heater: 9KW Refrigerant: R134A-3.8kg Kledpem H Utfefx Ah Nsl Tension: 380V Congestion: 110cm/80cm/H185cm Weight: +-500kg Voltage: 380V 6900 € Reference: Wood dryer with dehumidification system

Condition: used, Four-sided planer moulder SCM Sintex NTE Electronic four-side planing and profiling machine Planing width: 180 mm Planing height: 105 mm 4 spindles Spindle motor 1 + 4: 7.5 kW Spindle motor 2 + 3: 7.5 kW Spindle diameter: 35 mm Long infeed table approx. 2300 mm Spindle speed: 6000 rpm Feed speed: 6/12 m/min Electric height and width adjustment Lubrication pump incl. planing tools Machine WORKSHOP TESTED and in VERY GOOD CONDITION Kljdpfxexqf Dyj Ah Nsl Available ex stock Lieboch / LEASING POSSIBLE

Condition: new, With air flow rates of up to 22,000 m³/h, the stationary compact filter systems of the ECO JET series offer a wide range of applications. They are the ideal extraction solution for machines in various manufacturing sectors and industries, including larger processing machines. Eligible for BAFA funding according to Module 4. ECO JET series systems are equipped with fans arranged on the clean air side, which draw the dust- and chip-laden air towards the filter unit. In the most powerful DUO models, two fans are connected in parallel. A flange at the filter unit inlet enables the connection of custom duct diameters. The aerodynamically optimized airflow in the separation chamber allows coarse particles to be separated directly, without reaching the filter bags. Residual dust collected by the filters is automatically cleaned by the AL-KO OPTI JET® filter cleaning system, with the separated material discharged into mobile collection containers located beneath the filter. Applications: - Extraction from production machines, machining centers, and ductwork systems with multiple suction points - Direct extraction for continuous operation - In sectors such as wood processing, joineries, carpentry workshops, furniture manufacturing, plastics manufacturing and processing, paper production, orthopedic industry, and many more Kledpfx Ahjwwtuij Nol Advantages: - Wide selection of standard extraction systems with numerous customer-specific customization and options - Consistently high suction performance thanks to integrated pre-separator and AL-KO OPTI JET filter cleaning system - Heating cost savings, as 100% recirculation operation is possible in many cases - Small footprint due to compact design - Suitable for indoor and outdoor installation - Available in ATEX-compliant versions - Extensive range of accessories and numerous options for individual device configuration - Eligible for BAFA funding according to Module 4

Condition: good (used), Code: 0100 Brand: MASTERWOOD Model: OMS 4MM - CE Standard Chain and lock mortising machine for all types of lock housing, for wooden doors, window frames , furniture, shelves - CE Standard Aggregate with 2 horizontal milling cutters for simultaneous execution of key slot and handle hole Max depth of cut mm 150 Max length of cut mm 330 Transversal stroke mm 80 Max working height for doors mm 1000 Vertical worktable stroke mm 250 Mortising machine motor power output Kw 3 Vertical unit motor power output Kw 0,55 Horizontal unit motor power output Kw 1,84 Suction port diameter mm 120 Overall dimensions mm 1400 x 950 x 2100 h Weight kg 850 Kledpowd Rwbsfx Ah Nel

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, Weinig Unicontrol 10 Year of manufacture: 1996 Technical condition: Very good Description: The Weinig Unicontrol 10 is a CNC automatic machine designed for planing and profiling wooden elements, particularly used in the production of windows and doors. It combines the functions of four-sided planing and precise profiling. Kljdpjwbikbofx Ah Njl Main features: ✅ Automatic adjustment of spindles and guides using a CNC system ✅ Very high machining precision – ideal for serial production ✅ Fast machine setup thanks to profile setting memory ✅ Robust and durable frame construction ✅ Suitable for working with various types of wood – both soft and hard Included in the set: Weinig Univar 6, year of manufacture: 1996, in very good condition.

Condition: like new (used), Year of construction: 2023, operating hours: 1,131 h, functionality: fully functional, machine/vehicle number: 220.09.023.23, feed rate X-axis: 18 m/min, workpiece height (max.): 60 mm, edge thickness (max.): 6 mm, Edge thickness...0,4-3 (6) mm Panel thickness...8-60 mm Feed speed.. 10+18 m/min. Aggregates: Spraying unit top and bottom - Separating agent Joint trimming unit - dia tools Edge (coil+strips) magazine Quickly changeable application unit + 1 additional, "Easyclean" system "Glue box" system Pressure zone - 1+2 rollers, pneumatical Spraying unit - lubricating agent Guillotine for coil edge 0,4-3 mm End trimming unit 2x0,35 kW, 200 Hz, tilt-able 0-10° Trimming unit - R2+flat, 2 x 0,75 kW, 200 Hz Profile scraping unit, R2, pneumatically ON/OFF Corner rounding unit, 2 motors, servo adjustment Kjdjv Rlzijpfx Ah Noll Flat scraping unit in nesting execution, pneumatically ON/OFF Buffing unit Spraying unit top and bottom, cleaning agent Condition: Machine is like new, only 19 km of edge was done