Warehouse lift

Hänel Lean-Lift 3060-825

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 532.323/10-0, total height: 6,454 mm, total width: 6,810 mm, total length: 2,810 mm, load capacity per storage section: 180 kg, load capacity: 40,000 kg, A set of 2 Hänel Lean Lifts in a linked lift system is being auctioned here! Machine numbers: 532.323/10-0*1 & 532.323/10-0*2 Exact model designation: Hänel Lean Lift 3060-825/281/340/75/180/40HS TECHNICAL DETAILS Load capacities (each) Max. container load: 180 kg Max. number of containers: 163 Max. total load: 40,000 kg per Lean Lift (deduct container weight) Access point 1 (front side) Clear opening height: 880 mm Access height: 890 mm (standard height) Access point height to operator’s floor: 890 mm LED lighting: yes Manual sliding door: yes Light curtain: yes Access point: Optoelectronic identification system (28-fold) for precise measurement of goods height Drive and travel speed Vertical speed without container: max. 1.83 m/s Vertical speed with container: max. 0.95 m/s Horizontal speed: max. 0.5 m/s Connection: 400 V / 20 A at 50 Hz Lift capacity: 5 kW Vertical motor power: 4 kW Horizontal motor power: 0.37 kW Lift control Controller type: MP 14 N-H TFT Display: Touch display with integrated alphanumeric keypad and function key block USB interfaces: 1 Serial interfaces (RS-232): 2 Ethernet interface: available, for HOST integration (communication with any ERP system) Protocol: SOAP protocol Bljdjxr Ng Uspfx Aqrsh Operating mode: HostWebSOAP for warehouse management in WMS Display language: German (DE) Additional memory card: included, for S-Version (standalone) Module 00 - remote-controlled lift operation Safety equipment: special protective equipment required for remote control outside the field of view MACHINE DETAILS Unit height: 6,454 mm Unit width per system/total: 3,405 / 6,810 mm Unit depth: 2,810 mm Net weight without containers per system: 4,371 kg Container empty weight per system: 2,275 kg Electrical data Phases: 3 Frequency: 50 Hz Voltage: 400 V Current consumption: 10.2 A Minimum cable cross-section of power supply: 2.5 mm² at 9.6 A Maximum fuse rating of power supply: 20 A / 400 V Colour: Pearl grey EQUIPMENT - Hänel Pick-o-Light-Vario (2-axis movable LED light field for colour-marking the requested item) - Height sensors for automatic fill height recognition and height-optimized storage - Hänel slot wall: 131 usable shelf profiles, slot profile 75 mm, container usable heights: 55 - 730 mm in 25 mm increments - High-Speed Generation for increased vertical and horizontal travel speeds - ESB Package: Redundancy system consisting of 8 integrated safety circuits + 2nd safety circuit

Condition: used, Year of construction: 2015, Vertical CNC machining center with 3 controlled axes and exceptional Y-axis machining capacity. It is equipped with a vacuum table clamping system that holds plates and sheets with the help of vacuum. This solution is particularly effective when machining thin parts that are difficult to fix using conventional clamping systems. The machining center is equipped with a set of valves that allow you to turn on or off different table zones, thus concentrating the vacuum in a specific area and optimizing the clamping of small components. Bodpfjv D A Imjx Aqrjlh Possibility of performing interpolated milling and drilling in composite panels, aluminum, steel or titanium sheets and aluminum profiles. Tekna provides user-friendly software that can be operated by both experienced CNC programmers and less experienced users. The TKE 783 is a machining center with 3 controlled axes for interpolated drilling and milling in composite panels, aluminum, steel or titanium sheets and aluminum profiles. Technical specifications: Model: Tekna TKE783 Year of manufacture: 2015 Power: 29 kW Dimensions of the machining table: 2010 x 6300 mm Weight: 4842 kg Speed: X axis 70 m/min; Y axis 55 m/min; Z axis 30 m/min Software: Windows, Embedded, Teach-in software CAD/CAM 2D NC TOOL Made in: Italy Other: aluminum milling up to 4 mm was worked on. The machine is connected, you can see how it works and test it in Estonia. It will be ready for transportation in April-May. If you have any additional questions, we will be happy to answer them.

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 532.323/20-0, total height: 6,454 mm, total width: 6,810 mm, total length: 2,810 mm, load capacity per storage section: 180 kg, load capacity: 40,000 kg, A set of 2 Hänel Lean Lifts in a linked lift system is being auctioned here! Machine numbers: 532.323/10-0*1 & 532.323/10-0*2 Exact model designation: Hänel Lean Lift 3060-825/281/340/75/180/40HS TECHNICAL DETAILS Load capacities (each) Max. container load: 180 kg Max. number of containers: 163 Max. total load: 40,000 kg per Lean Lift (deduct container weight) Access point 1 (front side) Clear opening height: 880 mm Access height: 890 mm (standard height) Access point height to operator’s floor: 890 mm LED lighting: yes Manual sliding door: yes Light curtain: yes Access point: Optoelectronic identification system (28-fold) for precise measurement of goods height Drive and travel speed Vertical speed without container: max. 1.83 m/s Vertical speed with container: max. 0.95 m/s Horizontal speed: max. 0.5 m/s Connection: 400 V / 20 A at 50 Hz Lift capacity: 5 kW Bledpexyygusfx Aqreh Vertical motor power: 4 kW Horizontal motor power: 0.37 kW Lift control Controller type: MP 14 N-H TFT Display: Touch display with integrated alphanumeric keypad and function key block USB interfaces: 1 Serial interfaces (RS-232): 2 Ethernet interface: available, for HOST integration (communication with any ERP system) Protocol: SOAP protocol Operating mode: HostWebSOAP for warehouse management in WMS Display language: German (DE) Additional memory card: included, for S-Version (standalone) Module 00 - remote-controlled lift operation Safety equipment: special protective equipment required for remote control outside the field of view MACHINE DETAILS Unit height: 6,454 mm Unit width per system/total: 3,405 / 6,810 mm Unit depth: 2,810 mm Net weight without containers per system: 4,371 kg Container empty weight per system: 2,275 kg Electrical data Phases: 3 Frequency: 50 Hz Voltage: 400 V Current consumption: 10.2 A Minimum cable cross-section of power supply: 2.5 mm² at 9.6 A Maximum fuse rating of power supply: 20 A / 400 V Colour: Pearl grey EQUIPMENT - Hänel Pick-o-Light-Vario (2-axis movable LED light field for colour-marking the requested item) - Height sensors for automatic fill height recognition and height-optimized storage - Hänel slot wall: 131 usable shelf profiles, slot profile 75 mm, container usable heights: 55 - 730 mm in 25 mm increments - High-Speed Generation for increased vertical and horizontal travel speeds - ESB Package: Redundancy system consisting of 8 integrated safety circuits + 2nd safety circuit

Condition: as good as new (ex-display), Year of construction: 2025, Pressing area: 3000 mm x 1500 mm Operating vacuum: -0.85 bar Vacuum pump flow rate: 40 m³/h Bljdpfxsu Egp Io Aqreh Pump power: 1.5 kW Noise level: 70 Db Heating temperature: max. 200 °C Heating power: 16 kW Machine length: 3100 mm Machine width: 1650 mm Machine height: 1750 mm Weight: 950 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 1984, Loading capacity: max. 300 Kg. Diameter of decoiler: 1.000 mm Diameter of spool: max. 900 mm Bjdpfx Aqef S I I Hsrjlh Inside diam of spool: 240 - 560 mm Hight of spool: max. 180 mm

Condition: used, Connect Four – The Building Blocks of Success from DLK – Storage Technology | Levelmaker® | Logistics | Solutions OUR OFFER Panel size: 2,500 mm x 2,000 mm x 38 mm P6 coating Price: €35.00 net per chipboard panel (€7.00/m²) This is a used item. PROJECT PLANNING Our sales team will be happy to prepare a non-binding offer tailored to your individual requirements. TRANSPORT & ASSEMBLY We are pleased to support you with the transport and assembly of the goods. PAYMENT TERMS Payment terms are to be agreed in the event of an order. The indicated price is per item/net price or as specified in the description (plus VAT). Of course, you will receive an invoice showing VAT. ABOUT US Bsdpfsvdqhbox Aqrelh DLK, based in Nordhorn, deals in new and used products across the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machinery for trade, industry, and the skilled trades. We constantly offer attractive used equipment from a variety of manufacturers and brands on favourable terms. If you have any questions, please do not hesitate to contact us.

Year of construction: 2004, condition: used, Tank & Environmental Protection Wozniack Dear Sir or Madam, we offer a 25.000 liters double-walled storage tank diesel tank ===== Nominal capacity : 25 cbm piece : 1 used : but generally overhauled, that means the tank is cleaned, sandblasted, primed and painted color equipment : lacquer RAL ; . However, you can always bring your own color requirements. Material : steel in steel, material S235JRG2 Documents : Manufacturer certificate/test certificate according to DIN 6616 D/2 and nameplate Piece : 1 dipstick Piece : 1 venting spigot Piece : 1 filling nozzle Piece : 1 new limit switch Piece : 1 new leak detector with filled up leak liquid Bjdpsc Nkr Nefx Aqrelh Piece : 1 ladder Piece : 1 suction line Shape : cylindrical storage tank with feet/console tank dimensions : length -approx. 8390 mm diameter -approx. 2.000 mm weight -approx. 4.500 kg Storage : above ground Compact diesel dispenser Piusi 70 Ltr min . Pump 230 Volt max 55 Ltr/min. on request also in 70Liter min . Of course you can also design your tank system! We will gladly implement your color and equipment wishes according to our possibilities. All our plants are extensively controlled and checked in our company by selected employees. We also offer an inexpensive delivery on request. The inspection of our plants is possible at any time. Further tank plants for above ground as well as underground storage are available in all sizes and are for sale on our premises. We also buy existing tank facilities at any time. A trade-in of existing plants is possible. With kind regards from Warstein Tank and environmental protection Wozniack Enkerbruch 2 59581 Warstein

Condition: good (used), Year of construction: 2011, Internal flange dimensions 2340 x 1340 mm Maximum panel dimensions (20mm thickness) 2340 x 1240 mm Working chamber height 60 mm Bledpetwba Ssfx Aqreh Total thrust 300 t Maximum specific working pressure 5 kg/cm2 Press cylinders No. 6 diam 140 mm stroke 250 mm Lower moving platen (closing movement from bottom to top) Opening between press platens 230 mm Side load 1400 mm Pvc roller uncoiler Double loading table

Condition: used, approx. 15t available Bsdpsdc A Siofx Aqrjlh

Condition: new, Year of construction: 2025, load capacity: 5,000 kg, Complete set including hand and double-foot remote control Digital speed display Hydraulic height adjustment Dimensions: Tilt height min: 800mm Tilt height max: 1900mm Horizontal height min: 1050mm Horizontal height max: 2000mm Clamping disc diameter 1500mm Length 2900mm, width 1400mm Bjdpfx Aqol Dq U Uorslh Weight 3200 kg Speed from 0.01 to approx. 0.9 rpm. CE certified