Machining Center - Universal

GROB-WERKE G550

Condition: ready for operation (used), Year of construction: 2020, operating hours: 8,700 h, Control Unit Brand HEIDENHAIN Model TNC 640 Movement X-Axis Movement 800 mm Y-Axis Movement 950 mm Z-Axis Movement 1020 mm Additional Equipment Accessories: Additional pallet + coolant cooling unit Isdpfsx D D Svsx Ah Netb This 5-axis GROB G550a universal machining centre was manufactured in 2020. It offers advanced capabilities for complex machining tasks. Consider the opportunity to buy this GROB G550a universal machining centre. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2021, control Heidenhain TNC 640 travel -x axis 3.500 mm travel -y axis 1.200 mm travel -z axis 1.500 mm turning speeds 4.000 U/min Maximum power 37 kW max. torque 644 Nm indexing 2,5 ° working area 3.700 x 1.000 mm max. table load 9.000 kg diameter of tools max. 125 (250) mm tool length - max. 400 mm General: - Gear spindle: SK 50 Milling head (spindle): - Technology: Diagonal head with gear spindle Tool magazine: - Technology: Chain magazine - Tool changer: Double gripper - Number of stations: 40 Equipment/accessories: - Position measuring systems: Direct in all axes - Chip disposal: Chip conveyor - Coolant supply: IKZ system, 20 bar - Workpiece measurement: Renishaw measuring probe - Setup mode: Electronic handwheel Ijdpfx Aex A H Sceh Njtb - Software option: Adaptive Control

Condition: excellent (used), Year of construction: 2010, travel distance X-axis: 800 mm, travel distance Y-axis: 950 mm, travel distance Z-axis: 1,020 mm, controller model: Siemens 840D sl, spindle speed (max.): 9,000 rpm, operating hours of spindle: 10,590 h, spindle motor power: 65,000 W, SLIDE Working travels in X- / Y'- / Z-axis [mm] 800 / 950 / 1020 B-axis 360° A-axis -185°/+45° Max. speeds in X- / Y'- / Z-axis [m/min] 90 / 50 / 90 Max. acceleration in X- / Y'- / Z-axis [m / s2] 8.5 / 4.5 / 14 Max. feed force in X- / Y'- / Z-axis [kN] 8 / 8 / 12 MAIN SPINDLE Tool interface for short hollow taper tools acc. to ISO 12164-1 HSKA100 Diameter at front bearing of spindle bearing [mm] 110 Speed nmax [rpm] 9000 Max. drive power at 100% / 40% duty cycle [kW] 54 / 65 Max. spindle torque at 100% / 40% duty cycle [Nm] 470 / 575 PART Table diameter [mm] 770 Table load [kg] (with / without pallet) 700 / 800 Interference diameter [mm] 900 EQUIPMENT LEVELS Automatic pallet changer 2-fold Pallet size [mm] 630 x 630 Itodpfx Asxrcurjh Njb Pallet change time [s] 13.0 Tool magazine expansion TM180 (HSK-A100)

Condition: used, Year of construction: 2019, x-travel 800 mm y-travel 1020 mm z-travel 970 mm Control TNC640 B - axis 360 x 0,001 ° feed B-axis max. 50,00 U/min A - axis -185 / +45 x 0,001 ° feed A-axis max. 25,00 U/min feed x-axis 1 - 65.000 mm/min feed y- axis 1 - 50.000 mm/min Feed z- axis 1 - 80.000 mm / min. rapid traverse X/Y/Z 60 / 50 / 80 m/min spindle turning speed - stepless 1 - 16.000 U/min power capacity at 100 % load 25,00 kW power capacity at 40 % load 32,00 KW max. torque at 40% / 100% load 206,00 / 159,00 Nm spindle diameter in front bearing 80 mm tool taper HSK-A63 tool magazin: 70 tool length - max. 500 mm tool diameter 118 mm tool diameter with 2 vacant positions 260 mm tool total weight 22,00 kg Chip to chip time 4,2 sec. size of pallet Ø 770 mm workpiece weight 800 kg interference diameter 900 mm total power requirement 35,00 kW weight of the machine ca. 25,00 t dimensions of the machine ca. 7,00 x 3,50 x H3,50 m 5-axis machining center with Heidenhain TNC640 control, integrated KNOLL coolant system KF220, coolant high-pressure 23bar, coolant through the spindle, chip conveyor, measuring probe Heidenhain TS640, electromechanical tool length check, Swivel axis calibration GSC, collision monitoring "DCM Collision", BLUM-Laser, GROB Spindle-diagnosis (GSD), kinematics-set. Itodpfxexn Amaj Ah Njb

Condition: used, New diesel generator set, power generator, emergency generator RTE Model: 50 kVA – identical to DAEWOO DAGFS 50 Brand new, unused, year of manufacture 2025 Rated output: 50 kVA Continuous output: max. 40 kVA Standby output: 55 kVA / 44 kW Rated current: 33 A Voltage: 400/230 V, 50 Hz 230 V, 50 Hz Fuel consumption: 99-liter tank for up to 8.5 hours of operation at 75% load Fuel consumption at 75% load: approx. 11 liters/hour Iedpoxlkq Uofx Ah Njtb Fuel consumption in standby mode: approx. 4 liters/hour Drive engine: 4-cylinder Ricardo ZH4105ZD inline diesel engine Engine power at 1500 rpm: 45 kW Engine power at 1800 rpm: 55 kW Displacement: 1500 cc Tank capacity: 99 liters - Simple and compact design with soundproof metal enclosure - Forklift pockets for easy and safe transportation - 3x CEE 16A sockets (3-pin, 230V) - 1x CEE 16A socket (5-pin, 400V) - Terminal connections for cable power supply for external consumers, e.g., site distribution boards - ATS module for mains backup operation, enables automatic emergency power switching in case of power failure Required space (L x W x H): 2150 x 950 x 1200 mm Weight: 900 kg New machine from stock

Condition: good (used), Year of construction: 2012, Control Heidenhain iTNC 530 Working area: 800 mm x 1020 mm x 970 mm (x/y/z) Table diameter: 630 x 630 mm Table load: 700 kg Workpiece diameter - max.: 900 mm Ijderx N Tzepfx Ah Nstb Rotary table (A-/B-axis) A-axis: -185 / +45 ° B-axis: 360 ° Total power requirement: 42 kVA Machine weight approx.: 22 t Chip conveyor Belt filter system - Motor spindle: 16,000 rpm Drive power: 25/35 kw Max. Torque: 160/223 Nm Spindle holder: HSK-A63 Tool changer: 120-position - Measuring probe - Kinematics package - Tool length checking device - BLUM laser measuring system Tool monitoring - electric handwheel - Suction - 80 bar IKZ system

Condition: used, Year of construction: 2011, Technical details: x-travel: 800 mm y-travel: 950 mm z-travel: 1020 mm control: Sinumerik 840D sl MDynamics Operate turning speeds: 10.000 1/min Spindle power: 26/20 kW max. torque on the spindle: 340/262 Nm tool taper: HSK-A 100 tool change unit: 120 (2x60) Pos. Pallet changer 2x: 630 x 630 mm table load capacity: 800 kg weight of the machine ca.: 20 t dimensions of the machine ca.: 3,3 x 6,15 x 3,2 m 6-axis simultaneous horizontal machining center with controlled swivel-rotary table (A/B-axis), Swivel table can swing overhead (180°), that means the part is hanging down overhead and chips don’t accumulate on pallet, they can fall free into the chip conveyor CNC controlled U-axis enables radial movement of tool for variable spindling diamenter. twin pallet changer 630 x 630 mm 6 hydraulic couplings for pallet fixture clamping with rotary joint in A and B-axis Ijdpfxowr Drns Ah Njtb special hydraulic pump for fixture coolant through spindle (10-80bar), one channel with proportional valve for pressures 10-200 bar, electromech. tool-length measuring device GROB, BLUM laser for tool measuring, tool coding, chip conveyor, 3D touch probe M&H, el. handwheel Siemens HT8 coolant gun, coolant shower, air gun, oilskimmer, automatic door Remote diagnosis A 6th axis MAPAL Tooltronic U-axis system comes with the machine with two heads: 1. LAT125-HSK100 2. LAT160-HSK100 *

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, functionality: fully functional, working width: 550 mm, area performance: 3,300 m²/h, overall weight: 235 kg, water tank capacity: 50 l, battery voltage: 24 V, The Kärcher B50 W Bp Pack 115Ah R55+Dose+Rinse+Autofill is a compact yet powerful scrubber-dryer equipped with numerous innovative features. Iodexb A U Rspfx Ah Nstb It offers a stepless drive system, a detergent dosing system, automatic shut-off of the fresh water supply while filling, and a dirty water tank cleaning system. Additionally, the machine can be configured via app, and maintenance or support information can be accessed through it. The Kärcher B50 W features a robust roller brush deck, which provides the advantage of sweeping coarse debris, such as wood splinters, into a separate coarse dirt container. This ensures that suction performance is not compromised. It is suitable for daily cleaning of workshops, schools, sports halls, and similar facilities. Technical data: Working width: 550 mm Tank capacity: 50 litres / 50 litres (fresh/dirty water) Runtime: max. 2.5 hours Area coverage: 3,300 m²/h

Condition: excellent (used), Year of construction: 2019, operating hours: 10,000 h, functionality: fully functional, machine/vehicle number: G552-2158 U21156, travel distance X-axis: 800 mm, travel distance Y-axis: 1,020 mm, travel distance Z-axis: 970 mm, rapid traverse X-axis: 65 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 80 m/min, torque: 206 Nm, controller manufacturer: HEIDENHAIN, controller model: TNC 640, workpiece diameter (max.): 900 mm, workpiece weight (max.): 700 kg, table load: 800 kg, rotary table diameter: 770 mm, overall weight: 25,700 kg, spindle speed (max.): 16,000 rpm, operating hours of spindle: 5,200 h, coolant supply: 40 bar, number of spindles: 1, number of slots in tool magazine: 126, tool length: 750 mm, Equipment: chip conveyor, Machine Specifications: Model: GROB G550 AB Generation 2 Power Supply: 400V, 50Hz, TN-S Compressed-Air System: Working pressure 5 bar, minimum input pressure 5 bar Automatic Work Area Door for manual and automated loading/unloading Work Area Exhaust System: Decentralized, 800 m³, Filter Grade F9 Machine Protection for Water-Based Cutting Fluids Work Area Lighting Cooling System: Air-cooled chiller unit (11 kW) Control System: Heidenhain TNC 640 with English HMI Swivel Axis Calibration (GSC) Collision Monitoring (DCM) Kinematic Measurement Inspection Equipment Itedpfx Ahev Hdmpj Njb Pallet Storage System Interface (Software & Hardware v1.7) Key Features: Tilting Table Unit (A-Axis) & Rotary Table with T-Slots (B-Axis) Motorized Spindle: HSK-A 63, 16,000 RPM, 159/206 Nm, 25/32 kW, Oil-Air Lubrication Double Disk-Type Tool Magazine: HSK-A 63, 126 pockets, supports extra-long tools Laser Measurement System Tool Lift & Tool Cleaning Device Chip Management: Scraper-Type Chip Conveyor, Cutting Fluid Filter System KF220, Cutting Fluid Tank High-Pressure Cutting Fluid Unit (5-40 bar, ICS), Circulating Chiller (13 kW), Air Gun & Flush Gun in Work Area, Compressed Air Feed Through Spindle Center Touch Probe: Renishaw OMP60 Remote Machine Diagnostics with Access Control Switch CE Labeling, Slovenian Documentation & Tags Easy Robot 250 Automation System: Base Unit: ERE Robot Easy MTS 2.0 400, 6-position 250kg Accessories: EWIS Rapid Scan, Comserver Kit Internal Erowa Manual Control Options: Magazine modification, Robodoor & Safety Fences Interfaces: Plug Kit Harting Modular Connector Installation & Training Included Tooling for Automation: MTS Base Plate 410x410x250 P/A Universal (6x) MTS Pallets, Seals, and Chucking Spigot Set MTS Gripperlink Rapid & EWIS Rapid Chip with Chip Holder This GROB G550 is an advanced, fully-equipped machining center ready for high-precision and high-efficiency operations. The Easy Robot 250 system enhances automation capabilities, making it an ideal solution for modern manufacturing environments.

Condition: used, Year of construction: 2005, x-travel 1.000 mm y-travel 1.000 mm z-travel 1.000 mm Control 840 D Siemens turning speed range - main spindle 20 - 18.000 min/-1 power capacity - main spindel 28 / 19 kW max. Torque 121 Nm tool taper HSK-A63 swivellable B: -30 / +180 ° swivle time 1,2 s numbers of pallets 2 size of pallet 1.000 x 800 mm max. workpiece weight 1.500 kg rotatable C: 360 ° number of toolpositions 180 pos. tool taper HSK-A63 total power requirement 78 kVA weight of the machine ca. 27,0 t dimensions of the machine ca. 8,0 x 7,0 x 3,4 m Isdpfowf Rgfex Ah Notb 5 Axis - CNC Machining Center Universal DECKEL MAHO - DMC 100 U duoBLOCK - Swivel-Milling-Head (B-Achse) - NC-Rotary (C-Axis) - pallet changer - 180-pos. tool-changer - WITHOUT zero point clamping system - WITHOUT RINGLER exhaust - WITHOUT tools