New demonstration machine! List price: €86,567 net Base machine complete in standard configuration for drilling and grooving: For detailed technical data, please refer to the ProTec Type 0571 data sheet. Processing unit with: PowerBlock with 21 spindles and 1 grooving saw - 13 vertical drilling spindles - 6 horizontal drilling spindles in Y - 2 horizontal drilling spindles in X - 1 grooving unit in Y 4th drilling axis in Y Workpiece sizes and weights - Workpiece width (X): min. 60 mm / max. 1000 mm - Workpiece thickness (Z): min. 6 mm / max. 60 mm - Workpiece length (Y): min. 250 mm in through-feed modemax. 5600 mm programmable workpiece length in software - Workpiece weight: max. 75 kg Milling unit Profit HSK63F with 3-position magazine for automatic tool change, motor 5.5 kW (S1), 1000–20,000 rpm with frequency converter, clockwise and counterclockwise rotation, for tool holders HSK63F with collet chuck 462E/OZ25, cutter length up to 130 mm. Information: Machining unit MultiUnit with PowerBlock with 21/23 spindles, grooving saw and optional Profit milling unit. Connected load 12 kVA Rated current 17.5 A Fuse 32 A Voltage 400 V, 50 Hz, 3 Ph (without transformer) Network TN or TT Pneumatic connection 7 bar (102 psi). At the machine: coupling plug (quick coupling) ¼, DN7.2, brass, factory-supplied. For the machine: coupling socket (quick coupling) ¼, DN7.2, brass, customer side. Supply line, inner hose diameter 12 mm (min.). Compressed air consumption continuous operating air consumption approx. 230 L/min (approx. 3.8 L/sec) (compressed air). Extraction connection 3x extraction outlets dia. 80 mm. Extraction air velocity 30 m/sec - measured at the extraction outlet. Extraction requirement min. approx. 2500 m3/h. Machine weight approx. 1650 kg (with options!). Machine installation area: In general, a ProTec fix can be bolted to the floor. A concrete floor (or foundation) is required (at least at the four machine corners/feet). Equipment: Protec 571 Profit HSK63F with 3-position magazine. Roller table 765 mm (Y-axis), foldable, for machine front, width 500 mm. Roller table 765 mm (Y-axis), foldable, for machine rear, width 500 mm. Auxiliary stop 600 mm with integrated rollers for roller tables. Additional safety device with lamella curtain. Prerequisite for horizontal routing for Lamello P-System (without Lamello P-System tools). Drill bit set for Protec shank ø 10 mm with clamping surface (JSO) 1 HW-roof tip drill bit 5x70mm (NL 35mm), LH # 30566-5-05035-L 3 HW-dowel drill bits 5x70mm (NL 35mm), RH #30540-5-05035-R 4 HW-dowel drill bits 5x70mm (NL 35mm), LH #30540-5-05035-L 3 HW-dowel drill bits 8x70mm (NL 35mm), RH #30540-5-08035-R 5 HW-dowel drill bits 8x70mm (NL 35mm), LH #30540-5-08035-L 2 HW-dowel drill bits 10x70mm (NL 35mm), LH #30540-5-10035-L 1 HW-cup drill bit 15x70mm (NL 35mm), LH #30300-5-15070-L 1 HW-cup drill bit 20x70mm (NL 35mm), RH #30300-5-20070-R 1 HW-cup drill bit 35x70mm (NL 35mm), RH #30300-5-35070-R 1 HW-grooving cutter ø 125/30 mm groove width (SB) 4.0 mm, Z=12, LH, Leitz Only for chipboard and MDF, solid wood on request and subject to agreement Tool holder HSK63 F 3.00 pcs For collet 462E/OZ25 Collet 462E/OZ25 for shank 25 mm 3.00 pcs Indexable insert shank cutter Z1+1 1.00 pc HW with indexable insert drill tip ø20, S25, LH 120, L2/L3 58 mm Grooving cutter HW indexable inserts Z1 1.00 pc with indexable insert drill tip, D Ø 10 mm, d Ø 10 mm, L1 75 mm, L2 25 mm, L3 40 mm, RH (adapter 0571WAB10 to be ordered separat
Isdsw Tfzfspfx Ah Njal
The listing was translated automatically. Translation errors are possible.
I found this listing on Machineseeker: CNC machining center, Gannomat, ProTec 0571 https://www.machineseeker.nz/gannomat-protec+0571/i-19862180?utm_source=ms&utm_medium=social&utm_campaign=share&utm_content=19862180
Condition: excellent (used), Year of construction: 2020, MACHINING CENTER
GANNOMAT "PROTEC 0571" working width 1300 mm
Drilling, grooving, milling
Base machine complete in standard version according to price list 01/19/D:
For detailed technical data, please refer to the datasheet for PROTEC Type 0571
-
Machining unit with:
PowerBlock with 21 spindles and 1 slotting saw (BK 1341)
- 13 vertical drilling spindles
- 6 horizontal drilling spindles in Y
- 2 horizontal drilling spindles in X
- 1 grooving unit in Y
4th drilling axis in Y
-
Milling unit Profit F3 HSK63F with 3-position magazine for automatic tool change, 5.5 kW motor (S1), 1,000–20,000 rpm with frequency converter, clockwise and counterclockwise rotation, tool holder HSK63F with collet 462E, cutter length up to 130 mm.
-
INCLUDES OPTION:
Additional safety device with lamella curtain for processing Lamello P-System.
Required for horizontal milling for Lamello P-System with groove cutter Ø 100.4 x 7 x 30 mm.
-
Workpiece sizes and weights:
- Workpiece width (X): min. 60 mm / max. 1300 mm
- Workpiece thickness (Z): min. 6 mm / max. 60 mm
- Workpiece length (Y): min. 263 mm in through-feed mode, max. 5600 mm programmable workpiece length in software
- Workpiece weight: max. 75 kg.
-
Air connection: 7 bar
Machine No. 435.046
Electrical connection: (400V, 3Ph, 50Hz, (12kVA, 17.5A))
- Pressure device from above for working width 1300 mm
- 765 mm roller table (Y-axis), foldable, for machine front, W 500 mm
- 765 mm roller table (Y-axis), foldable, for machine rear, W 500 mm
- Auxiliary stop 600 mm with integrated rollers for roller tables
- Extraction distributor Ø 160 mm / Ø 80-80-80 mm, spacing 196 mm
- Documentation in German:
Operating manual: GERMAN
Programming manual: GERMAN
Operator software: GERMAN
Operating system: ENGLISH
Keyboard: GERMAN
Location: ex stock 54634 Bitburg
Isdpfx Ajw Sguwsh Nsal
- immediately available -
Condition: excellent (used), Year of construction: 2017, CNC-controlled precision machining center Gannomat Type Protec 571 CNC
Iasdpfx Ahewvk Auo Nol
• For drilling, grooving, and milling
Machining unit with PowerBlock featuring 21 spindles and 1 grooving saw:
• Vertical drilling spindles: 13
• Horizontal drilling spindles in Y: 6
• Horizontal drilling spindles in X: 2
• Grooving unit in Y: 1
• Milling unit Profit: 4.5 kW, 3000 - 18,000 rpm with frequency converter
• Workpiece width (X): min. 85 mm / max. 1000 mm
• Workpiece thickness (Z): min. 6 mm / max. 60 mm
• Workpiece length (Y): min. 285 mm in throughfeed mode / max. 5600 mm programmable workpiece length in software
• Workpiece weight: max. 70 kg
Processing speeds per axis:
• On X-axis: max. 90 m/min
• On Y-axis: max. 30 m/min
• On Z-axis: max. 15 m/min
Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 435.046, workpiece weight (max.): 75 kg, workpiece height (max.): 60 mm, rotational speed (max.): 20,000 rpm, workpiece length (max.): 5,600 mm, working width: 1,300 mm, TECHNICAL DETAILS
Working width: 1,300 mm
Workpiece dimensions
Iodpfexnyn Iox Ah Njal
Workpiece width (X): 60 - 1,300 mm
Workpiece thickness (Z): 6 - 60 mm
Workpiece length (Y): 263 - 5,600 mm
Workpiece weight: max. 75 kg
Drilling spindles: 13 vertical, 6 horizontal in Y, 2 horizontal in X
Grooving unit: 1 in Y
Milling unit motor power: 5.5 kW (S1)
Speed range: 1,000–20,000 rpm
Tool holder: HSK63F
Maximum cutter length: 130 mm
MACHINE DETAILS
Electrical connection: 400 V, 3 phases, 50 Hz, 12 kVA, 17.5 A
Air supply: 7 bar
EQUIPMENT
Counter-pressure device for 1,300 mm working width
Foldable roller table 765 mm for front and rear of the machine, width 500 mm
Auxiliary stop 600 mm with integrated rollers for roller tables
Additional safety device with lamella curtain
Extraction distributor: ∅ 160 mm / ∅ 80-80-80 mm, spacing 196 mm
Documentation
Condition: new, Year of construction: 2025, CNC-controlled drilling, gluing, and dowel insertion machine
Complete in standard configuration with:
- Support with linear guide consisting of:
1 pc. single-spindle horizontal drilling unit, motor 0.65 kW, stroke 70 mm
Tool speed selectable via operator software (3000/5000/8000 rpm)
1 pc. blow-out, gluing, and dowel insertion station for dowels Ø 8 mm, dowel length 25–50 mm
- Fully automatic, electronically controlled central lubrication
- X-axis NC controlled, with working length 700 mm, max. traversing speed 95 m/min
- Z-axis manually adjustable via mechanical digital counter, position on support table 5–40 mm
- Dowel insertion projection adjustable from 7–20 mm via mechanical digital counter, drilling depth 0–35 mm
(with drill length TL 70 mm), automatically set with insertion projection
- Closed glue system with 6 bar glue pressure via glue nozzle, for glues with viscosity from 150 to 350 mPas
- Glue quantity steplessly adjustable via operator software
- Selector switch GLUE/WATER to flush glue system, each with:
1 stainless steel container for 7.5 kg glue and 7.5 l water
- Indicator lamp for residual glue level in glue container
- 1 pc. left side stop, 1 pc. right side stop (all removable)
- 2 pcs. start buttons for individual operation with 1–2 workpieces
- 2 pcs. pneumatic angled clamping cylinders 10° for workpiece thickness up to max. 80 mm, workpiece length (Y) min. 70 mm
- 1 pc. extraction funnel, connection Ø 80 mm
- 1 pc. TCT controller with:
Integrated industrial PC, incl. Beckhoff TwinCAT soft PLC, operating temperature range 0–50°C,
15" capacitive touchscreen TFT industrial display, operating system: WINDOWS 10 IoT LTSC (long term support channel)
- Programming via menu-guided user software, drilling distances freely programmable with
ABSOLUTE, RELATIVE, or GRID dimensioning, automatic workpiece mirroring and process
optimization, 2 working fields assignable with different programs, graphical workpiece display,
parametric programming, zero-point shift, programmable work lists, plain text error diagnosis
- Integrated options:
- Electronic optical glue monitoring system G.I.C. (Glue Insert Control) for 1 pc. glue nozzle, art. no. 0470-0810
- 1 EASY CLEAN system, for automatic test glue shots before starting the drilling/gluing/dowel insertion program.
E.C.S. for 1 pc. glue nozzle, art. no. 0471-Z010
- 1 single-spindle vertical drilling unit from ABOVE, 0.65 kW,
(3000/5000/8000 rpm), position (Y) manually adjusted via mechanical digital counter
Adjustable from 5–40 mm, drilling depth (Z) max. 30 mm (with drill length TL 57 mm)
Workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm
(incl. drilling depth compensation, e.g., for Häfele Minifix) Art. No. 0471-0830
- 4 vertical angled clamping cylinders 10° with mount, additional, Art. no. 0470-0850
Ijdew Sgm Hopfx Ah Noal
Available: short notice
Condition: ready for operation (used), Year of construction: 2015, General Data
Measurements width 1800
Measurements depth 3450 mm
Measurements height 950 mm
Table
Table load 200 kg
Isdpfx Ahjx Nr Ufj Nsal
This BARTH VMPH 3013 laminating press was manufactured in 2015. It features dimensions of 3450 x 1800 x 950 mm and a clamping area of 3000 x 1320 mm. The vacuum table supports up to 200 kg with a maximum vacuum pressure of -0.95 bar. It operates on 400 VAC/50 Hz with a connected load of 12 kVA. Consider the opportunity to buy this BARTH VMPH 3013 laminating press. Contact us for more information about this machine.
Application Types
Pressing / Laminating
Does this listing, in your opinion, violate our marketplace rules?
Share listing by e-mail
Your listing has been deleted successfully
An error has occurred
Machineseeker Trust Seal
What is the trust seal?
Machineseeker certifies selected sellers with the Machineseeker trust seal. Before approval, a standardized and comprehensive check is carried out by experienced Machineseeker staff.
What do we verify?
Check of trade licence or commercial register extract
Verification of the dealer's postal address
Validation of the banking details
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for you as buyer?
The Machineseeker trust seal enables you, as a buyer, to identify trustworthy sellers who are very likely to do honest and righteous business, without having to do your own investigation.
Disagreements may of course still arise during the purchasing process. Machineseeker is not liable for any legal violations by buyers or sellers active on Machineseeker.
