Used KRONES filling line for beer - glass - 24000 BPH
Fischer

Name: Fischer Used KRONES filling line for beer - glass - 24000 BPH
Brand: Fischer
Availability: InStock

Year of construction

1999

Condition

Used

Location

Fumane (Verona) Italy

Used KRONES filling line for beer - glass - 24000 BPH Fischer

Machine data

Machine type:: Used KRONES filling line for beer - glass - 24000 BPH

Manufacturer:: Fischer

Machine number:: LC652

Year of construction:: 1999

Condition:: used

Price & Location

Seller location:: Via Incisa 1, 37022 Fumane (Verona), Italy

Call

Details about the offer

Listing ID:: A22270612

Reference number:: LC652

Update:: 28.07.2026

Description

Used KRONES filling line for beer - glass - 24000 BPHTechnical Specifications & Performance DataThis used bottling line is a second hand complete glass beer bottling line engineered for industrial packaging and beverage production. It is configured around a Krones Mecafill VK2V filling monoblock and complemented by bottle washing, pasteurization, labeling, and crate handling equipment. The line is optimized for glass beer bottles and delivers reliable output with precise control of product quality parameters.Rated capacity: 24,000 bottles/hour at 0.5LCompatible formats: 0.33L and 0.5L beer bottlesContainers: GlassFilling monoblock: Krones Mecafill VK2V 066-103/KK (1999), 66 filling valves, double air evacuation, integrated rinser with 60 heads (pressurized water) and 11 capping headsLabeling: Krones Prontomatic 720-18-86-130 (1999), cold glue, front/back/neck applicationBottle washers: Krones KES-1-1-190/19-80 (1998, retrofitted in 2013) and Robak PBSzPasteurizer: Fischer (1999) HTST module; nominal 130 hl/h, 5°C inlet, 72°C for 30 s (30 PU), 11°C outlet; buffer tank 6,000 LElectrical & utilities (pasteurization system): 3x400V, 50Hz; compressed air 6 bar (dry, oil-free)Additional Fischer heat-exchanger modules: EUROPA 40PI and DUBACAL 400P plate pack references (PS 16 bar; plate pack Cmax 780 mm, Cmin 770 mm)Advanced Automation & Control SystemsThe line integrates robust automation for consistent, repeatable performance in beverage production. The pasteurization system is automatically controlled with supervisory monitoring of all key process variables, enabling precise quality assurance at high throughput.Monitored parameters: pasteurization temperature, holding temperature, inlet/outlet temperature, temperature and pressure during pasteurization, flow volume, pasteurizing units (PU), buffer tank level, and filling pressure after buffer tankOperating modes: manual operation with automatic control for stability and safetyElectrical specifications: 3x400V, 50Hz (pasteurization system)Quick changeover between 0.33L and 0.5L formatsProduction Line Integration CapabilitiesThis complete bottling line is engineered for inline operation and smooth integration between washers, filling, pasteurization, labeling, and crate handling. It suits breweries seeking an industrial packaging solution for glass beer bottles with stable, high-speed performance.Integrated bottle washers upstream for returnable glass handlingHTST pasteurization between filling and labeling for microbiological stabilityCold-glue labeling with multiple label positions (front, back, neck)Crate washer and crate load/unload equipment for returnable logisticsMachine TypeManufacturer / Model
Dcsdpfx Asziyyyjlbol

Documents

22270612-01.pdf

Seller

Registered since: 2021

301 listings online

Call

Send inquiry

Telephone & Fax

+39 344 0... show

These listings may also fit your interest.

Listing

Measuring Plate JOHANN FISCHER 87 690 NR.1

Ahaus

18,488 km

Measuring Plate
JOHANN FISCHER87 690 NR.1

Call

Listing

KHS Ferrum, Atlanta Line for Cans (2018) KHS Abfülllinie für Dosen

Menslage

18,398 km

KHS Ferrum, Atlanta Line for Cans (2018)
KHSAbfülllinie für Dosen

Call

Condition: used, Year of construction: 2018, Overview This compact automated can filling line was manufactured with main equipment from KHS, Ferrum, Ska Fabricating and Atlanta. The line is designed for beverage can production and includes depalletizing, can transport, ionized air rinsing, filling, seaming and downstream film / shrink packaging. The core of the line consists of a KHS Innofill Can C filling system combined with a Ferrum FC03 can seamer. The system is integrated with overhead and floor-mounted can conveyors and is arranged in a compact production layout. Technical Data - Manufacturer / main equipment: KHS / Ferrum / Ska Fabricating / Atlanta - Line type: Automated can filling line - capacity: 15.000/h - Number of filling valves: 21 - Number of seaming heads: 3 - Container type: 330ml, 440ml, 500ml standard can - Packaging type: loose cans into 12 & 24 trays and WA boxes - Year: 2018 - Operating hours: 3,446 h - Layout: compact canning line layout with overhead and floor-mounted conveyor sections Scope of Delivery - Can Depalletizer | Ska Fabricating Co. | – | Enclosed depalletizing system with safety guarding | 2018 - Can Conveyor System | KHS / AE | – | Overhead and floor-mounted conveyor network for empty cans and line transfer | 2018 - Ionized Air Rinser | Ska Fabricating Co. | AV-C500 | Empty can rinsing / cleaning module before filling | 2018 Dcjdpjy Tt H Defx Albel - Can Filler | KHS | Innofill Can C | Automated can filling system | 2018 - Fill level detection | Heuft | - - Can Seamer | Ferrum | FC03 | Rotary can seaming unit | 2018 - Can dryer | Air control industries | 2018 - Labeller | Pack Leader Advanced Dynamics | Pro-516 | Labelling machine incl. roller feed | 2018 - Case Packer | Atlanta | Rafaello 726 | packaging system | 2018 - Case Packer Printer | SATO | S86-EX | 2018

See details

Clickout

Eislingen/Fils

18,583 km

Press brake
FischerHAKS 10/3200

22 days left

Details

Listing

Milling spindle Motor spindle Spindle E. Fischer AG Schweiz Spindle Präzisionsspindeln MW 10.6 / 10 - 4

Raesfeld

18,523 km

Milling spindle Motor spindle Spindle
E. Fischer AG Schweiz Spindle PräzisionsspindelnMW 10.6 / 10 - 4

€3,995

~~€4,990~~

Fixed price plus VAT

Call

Listing

Bottle blow molding machine "PET" 4.000 bph Sidel SBO 4

Stary Sącz

17,816 km

Bottle blow molding machine "PET" 4.000 bph
SidelSBO 4

€14,900

EXW ONO plus VAT

Call

Listing

Threading dies 828321) GEORG FISCHER R 2 zu GA 4

Tönisvorst

18,574 km

Threading dies 828321)
GEORG FISCHERR 2 zu GA 4

Call

Listing

CNC guillotine shear Fischer DHS 10/3000

Sankt Margarethen im Lungau

18,386 km

CNC guillotine shear
FischerDHS 10/3000

€9,500

Fixed price plus VAT

Call

Condition: used, Year of construction: 1986, functionality: fully functional, Hydraulic CNC plate shear Fischer DHS 10 / 3000 Maximum cutting length / sheet width: 3,000 mm Maximum sheet thickness, normal steel: 10 mm Maximum sheet thickness, stainless steel / V2A: approx. 6 mm Control: CNC-controlled back gauge Machine weight: approx. 7.5 to 9.0 tons Dcedpfx Alszl Twqebjl Installation dimensions L x W x H: approx. 3.80 m x 2.20 m x 2.00 m

See details

Listing

Thisted

17,992 km

CHEESE PREPRESS MKT-A

Call

Listing

Cleaning cabin for components Fischer Automation Reinigungskabine

Köditz

18,356 km

Cleaning cabin for components
Fischer AutomationReinigungskabine

€500

EXW ONO plus VAT

Call

Listing

Veneer machine with direct stacking FISCHER & RÜCKLE FZR15 / DAR 22 (2009) FISCHER & RüCKLE FZR15 / DAR 22

Germany

18,395 km

Veneer machine with direct stacking FISCHER & RÜCKLE FZR15 / DAR 22 (2009)
FISCHER & RüCKLEFZR15 / DAR 22

Call

Condition: used, Year of construction: 2009, - Veneer strip lengths (fiber direction): 350-1500 mm - Veneer strip widths (cross-fiber direction): 50-500 mm - Veneer surface width (cross-fiber direction): min. 260 mm - Veneer strip thickness: 0.3-1.5 mm Veneer machine with direct stacking Manufacturer: Fischer & Rückle Type: FZR 15 / DAR 22 Year of manufacture: 2009 Cross-feed splicer For the most efficient cross-gluing of parallel-joined veneer strips into endless or component-specific veneer surfaces. The cut or rotary-cut veneers must be pre-glued, using PVAc or urea adhesives. This cross-feed splicer is the most economical alternative to longitudinal splicers for cross-fiber applications. Production Approx. 17-20 joints/min Technical data Veneer strip lengths (fiber direction): 350-1500 mm Veneer strip widths (cross-fiber direction): 50-500 mm Veneer surface width (cross-fiber direction): min. 260 mm Veneer strip thickness: 0.3-1.5 mm Equipment Feeding device for efficient and convenient semi-automatic feeding of veneer strips. Panel automatic for component-specific surfaces with pre-sorted components and a pre-selected number of veneer strips. Features - Perfect bonding of cut or rotary-cut veneer of all wood species, even with wavy or undulating veneer - Unique, tried-and-tested horizontal pressing system that results in completely closed, solid glue joints Dcsdozuz Hlepfx Albel - Solid, robust construction for a long service life, reliable and fail-safe operation - Easy operation thanks to screen, clear symbols, separate pressure gauge with direct access, etc. - Liftable pressure beams for quick and easy access to the heating plates for cleaning - Few wear parts, low costs for service and maintenance Cross-cutter For cutting to a pre-set format width (across the fiber direction) immediately after splicing. The straight alignment of the veneer must be observed and, if necessary, corrected by pressing a button. When working in endless mode, the required distance to the direct stacking device is set. Direct stacking device DAR-22 For outputting and stacking the veneer surface immediately after splicing or cutting. The spliced surfaces are gently output and stacked without this compact direct stacking device exerting any mechanical forces. Min. veneer sheet lengths (fiber direction): 350* - 1500 mm Veneer sheet widths (across the fiber direction): 260 - 500* - 2200 mm Stack removal from the left, right, or rear Max. stack height: 500 mm *Reliable stack alignment not guaranteed Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

See details

Listing

Freising

18,468 km

Glass bottle filling plant
Diverse

Call

Condition: used, Glass bottle filling system for hot filling smoothies. Consisting of the following components: - Unpacking table - bottle rinser - Vacuum filler (with 24 filling valves, Nagema, 1984, type ‘VW 24/1’) - Flash pasteuriser (KZE) - Pressure tank - Capper (Marchesini, type "ML667") - Lid sorter - Tunnel cooler - Blower - Lid inspection (BBull CIS) - Labeller (Anker, 1999, type ‘Roland 10/4’) - Packing table - Conveyors - Control panel - Cooling tower - Steam boiler - Water softening (Lohbeck GmbH, Softtrol CD double system) Additional title: hot filling, with pasteurisation Capacity: 5000 bo/h Formats: 0.25 liter bottles, twist off caps Features: Unpacking table, rinser, vacuum filler, flash pasteuriser, pressure tank, capper, lid sorter, tunnel cooler, lid blow-off, lid inspection, labeller, packing table, conveyors, control panel, cooling tower, steam boiler Dcedpfx Ajwgc R Eolbjl

See details

Listing

Veneer machine with direct stacking FISCHER & RÜCKLE FZR15 / DAR 12 FISCHER & RüCKLE FZR15 / DAR 12

Germany

18,395 km

Veneer machine with direct stacking FISCHER & RÜCKLE FZR15 / DAR 12
FISCHER & RüCKLEFZR15 / DAR 12

Call

Condition: used, Veneer machine with direct stacking Manufacturer: Fischer & Rückle Type: FZR15 / DAR 12 Year of manufacture: 2006 / 2014 Cross-feeding splicer For highly efficient cross-gluing of parallel-joined veneer strips into endless or component-specific veneer surfaces. The cut or rotary-cut veneers must be pre-glued with PVAc or urea adhesives. This cross-gluer is the most economical alternative to longitudinal gluers for cross-grain applications. Production Approx. 17-20 joining points/min Technical data Veneer strip length (grain direction): 350-1500 mm Veneer strip width (cross-grain direction): 50-500 mm Veneer strip thickness: 0.3-1.5 mm Equipment Feed device for efficient and convenient semi-automatic feeding of veneer strips. Plate automation for component-specific surfaces with pre-sorted components and a pre-selected number of veneer strips. Features - Perfect bonding of cut or rotary-cut veneer of all wood species, even with wavy or rippled veneer - Unique, tried-and-tested horizontal pressing system that results in fully closed, solid glue joints - Solid, robust construction for high durability, reliable and fail-safe operation - Easy operation thanks to screen, clear symbols, separate manometer with direct access, etc. - Liftable pressure bars for quick and easy access to the heating plates for cleaning - Few wear parts, low costs for service and maintenance Cross cutter For cutting to a pre-set format width (across the grain). The width is determined by two photoelectric cells that are mounted at the required distance from the cutter. Direct stacking device DAR-22 For outputting and stacking the veneer surface directly after splicing. The spliced surfaces are gently outputted and stacked on this compact direct stacking device without mechanical intervention. Min. veneer sheet length (grain direction): 350 mm Veneer sheet width (across the grain): 250 - 1200 mm Max. stack height approx. (small sheets are not perfectly aligned): 500 mm Max. stack width (across the grain) for discharge to the rear end: 1200 mm Note: The technical data and descriptions are a transcript of the original order confirmation. Data is for informational purposes only and is not binding. Dcodjzuz Hfepfx Albel

See details

Listing

Veneer Shear FISCHER & RüCKLE (2007) FISCHER & RüCKLE

Germany

18,395 km

Veneer Shear FISCHER & RüCKLE (2007)
FISCHER & RüCKLE

Call

Condition: used, Year of construction: 2007, - Cutting length: 3,400 x 1,300 x 35 mm (depending on the wood type) - Incl. 3 spare blades - Incl. milling cutter - Incl. gluing station - New energy chains installed in 2020 Veneer shear Manufacturer: Fischer & Rückle / Monguzzi Year of manufacture: 2007 Veneer shear with milling unit and gluing unit for butt joint gluing Dcodpfxszuzqqo Albel - Cutting length: 3,400 x 1,300 x 35 mm (depending on the wood type) - Incl. 3 spare blades - Incl. milling cutter - Incl. gluing station - New energy chains installed in 2020 - Length: 7 m - Width: 3 m - Height: 2 m Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

See details

Listing

Milk & dairy production Complete PET Bottle Filling Line For Dairy products 270, 540 ml

Przemyśl

17,660 km

Milk & dairy production
Complete PET Bottle Filling LineFor Dairy products 270, 540 ml

€60,000

ONO plus VAT

Call

Condition: like new (used), Year of construction: 2014, Complete Bottle Filling Line for non-aseptic milk and other dairy product Capability 270, 540 ml PET/Plastic bottles with the cap D- 38 mm Bottle size: 270mm: D-60mm, H-132mm 540mm: D-70mm, H-180mm Capacity: 270mm: 2500 bottles per hour 540mm: 2000 bottles per hour Made by SELO, Netherlands. YOM 2014 Consisting of: 1. 2x Accumulation Tables 150 cm diameter Motorised 2. Rotary Bottle Washer 15 bottle capacity Siemens Logo TD touch screen With Associated Conveyor 3. Selo 6 Head Filling Machine Dodoyiptqspfx Albocl 6 head fully automated filling station With Selo pressure tank Schneider touch screen control Pump and associated pipework 4. Capper Rotary 3 Head fully automated bottle capper with Mobile Cap Hopper/ Swan Neck cap Feeder 5. Albertina/Etipak In Line Labeller 6. Associated conveyors AS NEW CONDITION

See details

Listing

Veneer machine FISCHER & RÜCKLE FZR21 / DA - 12R FISCHER & RüCKLE FZR21 / DA - 12R

Germany

18,395 km

Veneer machine FISCHER & RÜCKLE FZR21 / DA - 12R
FISCHER & RüCKLEFZR21 / DA - 12R

Call

Condition: used, Veneer machine Manufacturer: Fischer & Rückle Type: FZR 21 Year of manufacture: 2015 For the most efficient edge gluing of parallel-connected veneer strips into continuous or component-specific veneer surfaces. The cut or rotary-cut veneers must be pre-glued with PVAc or UREA adhesives. This edge feeding joining apparatus is the most economical alternative to longitudinal joining apparatuses for cross-grain applications. Production Approx. 17-20 joints/min. Technical data Dedpfx Ajzuzptelbocl Veneer strip lengths (grain direction): 350-2150 mm Veneer strip widths (cross-grain direction): 50-600 mm Veneer surface width (cross-grain direction): min. 260 mm Veneer strip thickness: 0.3-1.5 mm Equipment Feeding device for efficient and convenient semi-automatic feeding of veneer strips Panel Automatic for component-specific surfaces with pre-sorted components and a pre-selected number of veneer strips. Features - The Furnimaster-plus has a veneer alignment function (reverse transport movement) - Perfect joining of cut or rotary-cut veneer of all wood species, even with wavy or rippled veneer - Unique, proven horizontal pressing system that results in fully closed, strong glue joints - Solid, robust construction for high durability, reliable and fail-safe operation - Easy operation thanks to touchscreen panel, clear symbols, separate manometers with direct access, etc. - Liftable pressure bars for quick and easy access to the heating plates for cleaning - Few wear parts, low costs for service and maintenance Cross cutter For cutting to a pre-set format width (across the grain) directly after splicing. Short widths can be pre-set and measured with the integrated encoder. Larger widths are determined by two photoelectric sensors that are mounted at the required distance from the clipper on the direct stacking device. Direct stacking device DA-12R, belt system For unloading and stacking the veneer surface directly after joining. The joined surfaces are gently unloaded and stacked on this compact direct stacking device without any mechanical impact. Min. veneer sheet length (grain direction): 350 mm Veneer sheet widths (across the grain): 250 - 1200 mm Max. stack height: 500 mm Max. stack width (across the grain) for unloading to the rear end: 1200 mm Note: The technical data and descriptions are taken from the original order confirmation. The data is for informational purposes only and is not binding. Another Fischer & Rückle machine, type: FZR 21, year of manufacture: 2009, is also available.

See details

Advertise here