Control unit

Fanuc Model L50/2000 Motor Spec. A06B-0572-B077 Servo Motor SN: CS72G0835

Condition: good (used), Year of construction: 2010, Horlemann HR10U-S Switchgear 12 kV HR 10U: the universal switchgear for industry and utilities Modular medium-voltage switchgear for solar power distribution Switchgear: Manufacturer: Horlemann Circuit: KKÜHTTT Type: HR10U-S Rated voltage: 12 kV Rated current: 630 A Short-circuit capacity: 20 kA/1s Height: 2060 mm Width: 1300 mm Depth: 800 mm Cell width: 7 x 650 mm Busbar: AL 50 x 10 mm Weight: approx. 620 kg Rated data HR10U: Ur: 12 kV Ir: 630 A Up: 75 kV Ik: 20 kA (1s) Ud: 28 kV IP: 50 kA Fr: 50 Hz IAC: AFL 25 kA (1 s) IP: IP4X According to IEC-62271-200 (VDE 0671-200); 2003-11 TMC Cast Resin Transformer: Design: Cast Resin High Voltage: 10 kV Low Voltage: 400-230 V Circuit: Dyn5 Year of Construction: 2010 Height: 1740 mm Width: 1300 mm Depth: 900 mm Weight: 1.8 t The switchgear is pressure-relieved via a pressure-relief chamber in the lower part of the switchgear panel. Documents: Test Report Ksdpfsnfu Dyox Abzenb Circuit Diagram Financing through our bank is also possible. komplett-konzept.leasingo.de You can find more items - new and used - in our shop! International shipping costs on request!

Condition: good (used), Year of construction: 2017, Machine is in good working conditions. Knjdpfx Abszlalhjzeb Parts shown by hand not come. Technical data are on pictures.

Condition: like new (used), Year of construction: 2016, functionality: fully functional, turning diameter over cross slide: 230 mm, turning length: 810 mm, Equipment: documentation/manual, A like-new machine with accessories and complete documentation. Please examine the images carefully, paying attention to the operating hours! The machine will be available in approximately 4 weeks. Control: Heidenhain MANUALPlus 640 HSCI - TFT screen 15.1" - Control panel with alphanumeric keyboard for comments and numeric keypad - Control station can be swiveled 250° Tool drive for automatic turret - with 8 tool stations - Tool drive via gears and clutch - Drive speed adjustable, max. 4000 RPM - Milling with end mill Ø 12mm x 8mm x 45mm / min, C-axis via main drive - Main spindle speed 0.001°/min - 100 RPM Horizontal bed - Prism/flat guide hardened and ground Working area - Swing diameter over bed 400 mm - Swing diameter over compound slide 230 mm - Compound slide travel 220 mm Main spindle drive - Digital AC motor – 50% duty cycle, 16 kW Spindle head - Spindle head DIN 55026 A6 - Spindle diameter in front bearing 115 mm - Spindle bore 82 mm - Speed range RPM 1-3500 Cross slide - Feed rate range, plane mm/rev / Feed rate range, longitudinal mm/rev / Thread pitches mm 0.01-999.9 - Rapid traverse, plane/longitudinal m/min 5/10 - Automatic central lubrication - Digital AC servomotors, plane and longitudinal Tailstock - Quill diameter mm 60 - Quill travel mm 140 - Taper attachment MK 4 - Clamping on the bed with clamping screws - Quill actuation and clamping manual - Tailstock roller guide Knsdpfx Asy Tzhpobzob Control - HEIDENHAIN MANUALplus 640 HSCI - V-constant for manual and automatic turning - Electronic stop turning and automatic turning - Simple cycle input in dialog with graphical images - Contour cycles: machining and finishing, longitudinal and planar, with tapers, radii and chamfers - Drilling cycles with / without pecking - Drilling/hole pattern cycle for axial and radial centering and drilling - Free-forming cycles DIN 76 and DIN 509 Form E+F - Special free-forming - Facing - Threads cylindrical, conical, flat threads with constant or variable pitch and with suggestion for thread depth - Thread drilling cycle with chip breaking function - Thread repair - Variation possibilities within cycles - ICP interactive contour programming - Programming according to DIN 66025 - Structured programming (UNTS) - Parallel programming - Geometry input absolute or incremental - Feed rate input mm/rev or mm/min - Input of a safety zone in front of the chuck or simple stop - Graphical program simulation (line or cutting path) Simulation in single block or complete program - Oriented spindle stop with angle indication - Automatic program run optionally single block or sequence cycles (with door locking) - Tool memory for 250 tools - Comfortable tool file - Technology database with 9 material/cutting tool combinations - Assignment of cutting speed / speed and feed rate - Part program memory 1.8 Gbyte Standard accessories - Chip tray - Machine light LED and energy-saving function - Leveling elements - Main motor fan circuit, temperature-controlled - Single-chamber filter for coolant cleaning, integrated into the coolant line (40 my) - Complete documentation

Condition: excellent (used), Year of construction: 2021, operating hours: 3,000 h, travel distance X-axis: 6,100 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 950 mm, CNC Travelling Column Milling Machine – Fully Retrofitted by REM (2021) Powerful and versatile heavy-duty milling machine, completely modernized by REM specialists in 2021 with state-of-the-art Heidenhain TNC 320 control. Ready for immediate production use. KEY SPECIFICATIONS: • X-axis (transversal travel): 6,000 mm • Y-axis (vertical head travel): 2,000 mm • Z-axis (axial slide travel): 950 mm • Dual-spindle head | Head rotation: 360° • Spindle speed: 1,000 – 4,000 rpm • Spindle taper: ISO 50 (automatic locking/unlocking) • Head dimensions: 290 × 290 mm • Spindle motor power: 15 kW (DC) • Machine weight: approx. 32 tonnes • CNC Control: Heidenhain TNC 320 WHY BUY FROM REM? ✔ Machine fully inspected and tested in working conditions ✔ Modern CNC retrofit – new electrics, new drives ✔ Documentation and technical support available ✔ Export worldwide | Competitive shipping Knodpfjn D N H Tox Abzjb Ideal for heavy component machining in aerospace, energy, and heavy industry. Contact us today for full technical specifications, photos, and video demonstration.

Year of construction: 2016, condition: excellent (used), 1 used short bar loader Manufacturer: Breuning Knodpfeht Rl Eex Abzjb Type: ILS RBL 80/12 Year of manufacture: 2016 Clamping range: 5-80 mm diameter Length: 100-1200 mm

Condition: used, Year of construction: 1979, turning diameter over bed:480 mm turning diameter over slide rest:200 mm turning length:650 mm swing diameter max. over bed cover:200 mm centre distance:750 mm spindle head:Gr.6 spindle bore:58 mm Ksdpfx Asdmbrxjbzonb total power requirement:18 kW weight of the machine ca.:2,7 t dimensions of the machine ca.:2,70x1,58x1,68 m

Condition: excellent (used), Year of construction: 2012, operating hours: 8,200 h, functionality: fully functional, repeat accuracy: 0.3 mm, table width: 2,200 mm, type of input current: three-phase, workpiece weight (max.): 6,000 kg, table length: 3,200 mm, milling spindle speed (max.): 12,000 rpm, ____RoboMill 2KR240 S20BT40 TT6t TB16 WM1 Collected Next Generation Robotic Stone Processing Complex “NO CONCRETE FOUNDATION REQUIRED” The robotic complex presented here is based on a KUKA KRC2 robot from 2012. The system can also be supplied with: - used KUKA KRC4 robots, - brand-new KUKA KRC4 robots, - next-generation KUKA KRC5 robots. Our company also offers larger robotic configurations based on the KUKA KR360 / KR500 platform, available in both used and new versions. Additional configurations are available with: - fully automatic spindle and wire-frame exchange systems, - additional milling spindles, - wire-saw frames of various widths, - additional technological heads, - rotary tables with payload capacities of: - 10 tons, - 20 tons, - 30 tons, - additional protective safety fencing systems. Introducing RoboMill — an adaptive multifunctional robotic system designed for: - milling, - contour cutting, - wire-saw processing, - stone slab machining. The key feature of the complex is its monobase construction, where all major system components are integrated into a single steel platform. The robot, rotary table, electrical communication, air and water lines, spindle cooling system, positioning systems, tool banks, and auxiliary mechanisms are all mounted on one rigid structure. This engineering approach provides several major advantages: - preservation of system geometry even after transportation - elimination of concrete foundations - rapid deployment at a new location - preservation of CAM-system mathematical accuracy without recalibration Installation requires only: - positioning the platform on the surface - drilling six anchor holes - fixing the structure using chemical anchors - connecting electrical power, compressed air, and water supply After that, the system is ready for operation. - Standard Configuration The complex is equipped with: Kjdpfezawm Hjx Abzjnb - industrial KUKA robot - automatic 16-position BT40 tool bank - semi-automatic spindle and wire-frame exchange system - rotary table with payload capacity up to 6 tons - 3200 × 2200 mm slab-cutting platform for disk machining - integrated spindle cooling system - internal routing of electrical, pneumatic, and water communication ____Robot System Functions The robot memory contains: - semi-automatic spindle and wire-frame exchange programs - all 16 spatial tool pickup and return programs - external kinematic models of the rotary table - auxiliary positioning and safe-transition programs Because all components are rigidly fixed to a single monobase structure, the center distances between the robot, table, and technological modules remain unchanged even after transportation. This allows the CAM mathematical model to remain fully valid while minimizing setup and recalibration time after installation. ___RoboMill is not just a robot. It is a mobile industrial platform for modern automated stone processing.

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 175849, travel distance X-axis: 1,740 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 840 mm, controller model: PC Fusion 640 M, total height: 4,450 mm, total length: 3,300 mm, total width: 2,900 mm, overall weight: 11,500 kg, spindle speed (max.): 12,000 rpm, 3-Axis Machining Center MAZAK - VTC 300C-II Manufacturer: MAZAK Knodpfx Aoyanuhobzeb Model: VTC 300C-II Control: PC Fusion 640M Year of manufacture: 2005 Internal coolant supply (IKZ): 15 bar Table length: 2000 mm Table width: 760 mm Feed rate X-axis: 36,000 mm/min Feed rate Y-axis: 36,000 mm/min Feed rate Z-axis: 36,000 mm/min Tool holder: SK 40 Spindle power: 15 kW Spindle speed: 12,000 rpm Tool changer: 30 positions Internal coolant: Yes Number of controlled axes: 3 Chip conveyor: Yes Cooling unit: Yes Length: 4450 mm Width: 3300 mm Height: 2900 mm Can be inspected under power.

Condition: used, Year of construction: 2018, Type Bestückungsanlage weight 120 kg In our opinion, the machine is in very good used condition and can be inspected under power by appointment. Technical features: - Robojob Mill-Assist: Ksdpfsxq R E Ajx Abzsnb - Raw part handling - Simple dialog control - Very easy to use - Raw parts can be stacked on the table - Pallet storage - Parts cleaning Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, cooling capacity: 680 kW (924.54 HP), Equipment: cooling unit, condenser Manufacturer: Güntner GVH 090.1.D/5-M(D) Year of manufacture:2004 Nominal power 680.4 /579.2 kw Refrigerant:R404 Refrigerant content:218.9+25 liters Flow rate: Temperature range: -50°C- +100°C Max pressure: Operating pressure: 28bar/-1bar (performance depends on usage parameters) Number of fans: 5 pcs, diameter 900 mm, Air flow:162500 /131000 m3/h Motor power consumption:17.60/11.50 Kw Heat exchanger aream2 Operating noise 52 dB Length: mm Height: mm Width: mm Weight: ca kg Kodpfx Ajvllxdsbzsnb The radiator has been technically inspected, fully functional