Blow molding machine

Eurodac EDA M600

Condition: excellent (used), Year of construction: 2016, Loma Systems Metal Detector with Rejector Model: IQ³ Model conveyor: MD Conveyor, serial number: G7B3C2RS-35150D Year of construction: 2016 Ncedpsv T Ah Esfx Ahvop 220-240 V, 1 Ph, 50/60 Hz, 3 A Belt width: 300 mm, clearance: 350 mm x 150 mm Total dimensions: 2020 mm x 1080 mm x 1120 mm

Condition: good (used), Year of construction: 2017, functionality: fully functional, LINEAR PET BLOWING MACHINE SET with auxiliary equipment AC ARCOR - multiBlow2 - 2017 Speed: 1,5L - 6000 Cavities: 4 Formats: 0,1 - 3,0L AUXILARY EQUIP 1. Chiller - M.T.A S.p.A - TAE EVO 051 2. LOW Pressure compressor - SHAMAL 45kw 3. High Pressure compressor - KAESER Booster N 753 - G 13 bar / 40 bar" 4. Air Dryer Ncjdpfsquuvrox Ahvsp 5. Receiver tank - Low pressure - MAX 16Bar 6. Receiver tank - High pressure - MAX 45Bar

Year of construction: 2009, condition: good (used), The Grunwald-HITTPAC AKH-059 is a 3-lane filling and closing machine. A rotary cup filling machine is a type of packaging equipment designed to efficiently fill and seal cups with various products, such as yoghurt, pate, kefir, cream cheese and other similar viscous or semi-liquid substances. These machines are commonly used in the food and dairy industry. The machine operates on a rotary system, which allows multiple cups to be filled and sealed simultaneously. The cups move through different stations, each dedicated to specific tasks like cup dispensing, filling, sealing, and capping. Installed cup dimension: 110 x 80mm (150g) Motor and vacuum pumps are protected and installed in the machine frame, underneath the table top. Dimensions: L: 2300 x W: 1800 x H: 2200mm Weight: 1500kg Power: 9kW Ncsdpfom Ux Tiex Ahvep Efficiency: approx. 2750 – 3750 cups/h (depends on the product consistency)

Year of construction: 2008, condition: like new (used), We sell a package of 26 cooling systems - Alfa Laval brand evaporators, all of which work on the glycol cooling system. The systems are powered at 220V or 380V or have an interchangeable power supply system according to the user's needs. The year of manufacture of the systems is 2008. We can sell also piece by piece not only as a package upon request. Commercial unit coolers designed for use in small and medium cold rooms from 10 up to 400 m³. Models designed for easy maintenance with immediate access to inspection areas. This series is available as a DX evaporator and brine unit cooler. Finned coil - H(C)FC Inner grooved Cu tubing ø 12 mm, triangular tube pitch - Brine Smooth Cu tubing ø 12 mm, triangular tube pitch - Corrugated Alu-fins - Fin spacings 4, 5.5, 6, 7, 8, 10 and 11 mm. • 1 to 4 AC fans, ø 250 mm up to ø 500 mm, drawing through the coil. Fan motors 230V/50-60Hz/1ph or 400V/50-60Hz/3ph in two noise levels (H/L). Motors with dynamically and statically balanced external rotors, manufactured in accordance with VDE 0530/12.84. • Corrosion resistant materials: coil frame AluZinc, casing strong and durable sheet metal, powder-coated RAL 9002. • Hinged drip tray and side covers for easy installation and maintenance. • Sufficient space for mounting of expansion valve inside the casing. • Mounting brackets allow flush ceiling mounting. • Fitted with schräder valve on the suction connection for testing purposes. • Pumped system available on request. • Stickers indicate fan direction and refrigerant in/out. • Delivery in mounting position. Coolers are mounted on wooden beams. Installation can take place with the use of a forklift. 1 AlfaCubic series (BL, GL, RL) 2 Refrigerant system (E = dry expansion, W=water/glycol, 3 Noise level (H=high, L=low) 4 Fan diameter (25=250, 35=350, 40=400, 50=500 mm) 5 Number of fans (1 to 4) 6 No. of tube rows (A=4, B=6, C=8) 7 Phases (S= single-phase, D= 3 phases Δ connection) 8 Motor voltage (230V, 400V) 9 No. of circuits 10 Packing (CR=crate) Njdjg N Db Hepfx Ahvjcp 11 Casing material (AP= powder coated, SS= stainless steel) 12 Defrost system (A= air, E= electric defrost, HG= hotgas) 13 Fin material/coating (AL=aluminium, EP= epoxy coated aluminium) 14 Fin spacing (4, 5.5, 6, 7, 8, 10 and 11 mm) 15 Tube material (Cu=copper) The evaporator coils of these units are high performance and are built-in 1/2 ”fluted copper tube and fin corrugated aluminium with gaps of 3.5, 6 and 8mm. The frame, made of aluminium sheet, is provided with protection collars. This frame has the application of thermostatic expansion valves. Regarding their exterior structure, they are manufactured in aluminium painted in high resistance RAL-9018 polyester colour. The vibrations in these machines are avoided thanks to the fact that their entire structure is compact and highly rigid. All its parts are easily removable for maintenance. These evaporators are fitted as standard with helical fans with high-performance protection grilles and are equipped with 315 or 350mm motors. diameter. Single-phase for 230V 50Hz, with a degree of protection IP-54, with external rotor and low consumption. All motors are connected to a watertight general box, according to IP-55 regulations. Finally, defrosting is carried out with 230V electric heaters built in armoured stainless steel tubes. Its vulcanized ends avoid derivations and are inserted inside the battery and the tray. They are connected to a watertight junction box. Application: Lo

Year of construction: 2010, condition: excellent (used), functionality: fully functional, For sale is a DSS / Tetra Pak Ultrafiltration/Microfiltration System, Model UF/MF 6338 (Pilot) from 2010. The installation is in excellent condition, fully operational, and ideal for pilot trials, product development, and replicating industrial process conditions on a smaller scale. Manufacturer: DSS / Tetra Pak Model: UF/MF 6338 (Pilot) Year: 2010 *Feed capacity: up to 3,550 l/h Retentate flow: approx. 2,200 kg/h Permeate flow: approx. 1,000 kg/h Number of filters: 6 pcs. Includes Alfa Laval heat exchanger, 3 sections Feed pump: 5.5 kW, Alfa Laval LKH 25 Ncjdoyka Stjpfx Ahvsp Booster pump: 18.5 kW, Alfa Laval LKH 50 Condition: very good, fully functional * The technical specifications listed are for processing cream into mascarpone. The UF/MF 6338 pilot plant impresses with its robust design, reliable Alfa Laval components, and a practical process configuration. With six filter elements and an integrated three-section Alfa Laval heat exchanger, it enables stable, temperature-controlled filtration—perfect for applications requiring reproducible results and flexible parameter adjustment. This system is particularly suitable for dairies and food producers seeking to test or optimize filtration processes (UF/MF) or develop new products—utilising technology from the DSS/Tetra Pak sector.

Condition: used, Year of construction: 2000, machine/vehicle number: SO126, Used HDPE Extrusion Blow Molding Machine for 10 L – 300 bph – Overview Second-hand Uniloy Milacron HSM10/D extrusion blow molding machine designed for producing up to 10 L HDPE containers. With a single-parison head and robust clamp, this EBM unit is ideal for industrial packaging and beverage production auxiliaries (e.g., water canisters, edible oils) and can be integrated within a used bottling line. Documentation and manuals are available. Reference number: SO126. Technical Specifications & Performance Data Main data Make/Model: Uniloy Milacron HSM10/D Year: 2000 Technology: Extrusion Blow Molding (EBM), single parison Material: HDPE Number of cavities: 1 Max container volume: 10 L Indicative output: up to about 300 bph on 10 L (application-dependent) Njdpfx Ahjyhbt Hjvscp Manuals: included Ref. no.: SO126 Extruder Screw diameter: 100 mm; L/D 24 HDPE screw speed: 0–70 rpm Plasticizing capacity (HDPE): approx. 300 kg/h Main extruder motor: 89 kW Heating zones: 6; barrel heating power: 31.4 kW Motor cooling power: 0.58 kW; barrel cooling power: 1 kW Parison head Type: PE 1/200, single parison Max die diameter: 200 mm Head heating power: 14.2 kW Parison thickness control: hydraulic (wall-thickness programming) Clamp & blow unit Clamp force: 200 kN Max mould size: 650 × 500 mm (H) Mould thickness: 2 × 150 mm Mould opening stroke: 300 mm Horizontal carriage stroke: 660 mm Blow pin stroke: 240 ± 5 mm Blow pin thrust at 50 bar: 320 kg Electrical Installed power: 156 kW (average consumption ~104 kW) Supply: 400 V, 50 Hz, 318 A, 3 + N Hydraulic system Reservoir capacity: 400 l Pump flow (1470 rpm): 123 l/min Max pressure (main circuit): 190 bar Main hydraulic motor: 37 kW; oil cooling motor: 1.5 kW Pneumatics Operating pressure (general): 6–8 bar; air use: 2000–2500 Nl/min Post-cooling pressure: 6–8 bar; air use: 1000–1500 Nl/min Cooling water Mould circuit: 8–12 °C; flow 15 m³/h Extruder & hydraulic oil: 10–24 °C; flow 4 m³/h Dimensions & weights Approx. machine size (L × W × H): 7600 × 7700 × 3900 mm Blow unit weight: 7600 kg; Extrusion group weight: 6400 kg Noise level at operator: < 85 dB(A) Advanced Automation & Control Systems Hydraulic wall-thickness programming for precise parison control, improving weight distribution and top-load performance on 10 L containers. Dedicated Uniloy command and control software (version code available in manuals) with operator interface for setpoint management and diagnostics. Integrated temperature control across six extruder zones and heated head for stable processing at up to 300 °C transformation temperature. Interlocked guarding and emergency stops for safe operation. Production Line Integration Capabilities This second-hand extrusion blow molder is integration-ready for downstream equipment typical of a used bottling line and industrial packaging systems: Conveyor...

Condition: like new (used), Year of construction: 2022, operating hours: 200 h, functionality: fully functional, screw diameter: 70 mm, overall weight: 600 kg, clamping force: 80 kN, total width: 2,800 mm, total length: 4,000 mm, total height: 2,260 mm, Main Features: 1. Computer Control System (PLC) – Japanese Mitsubishi PLC 2. Electrical Cabinet – All electrical components are sourced from globally renowned brands, ensuring quality and stability. 3. Touch Screen – Innovation computer control system 4. Advanced Hydraulic Cylinder from Germany 5. Linear Guideway 6. ABB Inverter from Switzerland & Rexroth from Germany 7. Large Diameter Galvanized Steel Pipes 8. Electric Lifting Platform 9. Ceramic Heater 10. Hydraulic System & Valve Connections – From Yuken Industry Technical Specifications: • Suitable Material: PE, PP, and others • Max Volume: 6 L • Production Capacity: 170-260 pcs/h • Dimensions: 4.0 × 2.26 × 2.8 m • Weight: 6T Plasticization System: Njdpfx Aev Iflpohvjcp • Reducer: Hard finishing, high strength, low noise • Screw: Ø 70 mm, L/D ratio 24, 38CrMoALA, cooling system available • Plasticization Capacity: 100 kg/h (HDPE) • Heating Zones: 3-4 aluminum heaters, automatic heating • Heating Power: 12 kW/h • Extruder Motor: Three-phase asynchronous motor (380V, 50HZ) • Cooling Fan: 4 zones, automatic cooling Extrusion System: • Material: High-grade alloy steel, central feeding • Number of Die Heads: 1 • Max Die Mouth Diameter: Ø 160 mm • Heating Zones: 4, stainless steel heating cycle • Heating Power: 5-7 kW Clamping System: • Features: High strength, rigidity, central mold locking, stable mold opening & closing • Clamping Force: 80KN • Template Distance Adjustment: 170-520 mm • Max Mold Size: 380 × 420 mm Electric System: • Automatic Monitoring, Fault Alarms, Auto Counting, Auxiliary Functions • Control Interface: Touchscreen with self-diagnosis alarm system • Temperature Control: Automatic temperature control module • Motion Control: Inovance (Chinese/English version) Hydraulic System: • Features: Multi-functional integrated hydraulic block, proportional control, high efficiency • Oil Pump Motor: Three-phase asynchronous motor (380V/220V, 50/60HZ) • Oil Pump: Imported double pump • Valves: Imported oil pump valves and connections • Oil Pipes: Double-layer wear-resistant • System Pressure: 60 kg/cm² • Cooling System: Separate water cooling cycle, oil cooler Pneumatic System: • Brand: Taiwan AIRTAC pneumatic system • Air Pressure: 0.6 MPa • Air Displacement: 0.8 m³/min • Electromagnetic Valve: Taiwan AIRTAC Main Components: Electronic Parts: • PLC Control System: MITSUBISHI from Japan • Touch Screen: INOVANCE • Temperature Controller: HUICHUAN • Auxiliary Relay: OMRON • Contactor: Schneider from France • Electric Motor: Three-phase 380V • Power Source: TAIWAN MEANWELL • Transducer: ABB from SWITZERLAND Hydraulic Parts: • Oil Pump: TAIWAN HIGH-TECH • Valve: YUKEN • Oil Pump and Connection: YUKEN • Sealed Part: HALLITE Air Control System: • Cylinder: AIRTAC • Air Valve: AIRTAC This blow molding injection machine was purchased directly from a factory in China for a specific project that was never realized. The machine was used for only one month. Location: Siemianowice Slaskie, Poland We also have peripheral equipment available for sale, such as: • 5 HP AIR COOLING SYSTEM • Auto Loading • 150 kg Color Mixer • Scraps Crusher

Condition: good (used), - Material: AISI 316 stainless steel - Standing on feet - Tanks, above, adapted to the cellar vault Dimensions : - Width: approx. 1150 mm - Depth: approx. 1800 mm - Total height at rear: 2500 mm - Total height at front: 3650 mm (including dome) - Ground clearance: 340 mm Equipment: - Rectangular door 320 x 420 mm - Total drain: flap valve DN 40, Friedrich no 2 - Residual drain: flap valve DN 40, Friedrich no. 2 - Taster - Level indicator - Dome DN 200 Ncjdpfxsvlkgae Ahvep

Condition: ready for operation (used), Year of construction: 2022, total length: 1,800 mm, product height (max.): 400 mm, product width (max.): 120 mm, input voltage: 220 V, SHOWROOM machine, the machine advertised was never delivered and was only used for test purposes. In the pictures, the steam tunnel is switched on for test purposes. alpha-pack SST-1500 steam tunnel Technical details: -even steam distribution through low-pressure steam drum -height-adjustable steam steel pipes -adjustable steam output Ncjdpfx Ahjt A Ar Ejvep -can optionally be combined with conveyor belt and sleeve label machine Steam tunnels are particularly suitable for shrinking heat-shrinkable film sleeves on all types of products (glasses, PET bottles, glass bottles, cans and much more). Our steam tunnels are easy to use and the cost-effective alternative to conventional shrink tunnels that are based on electric heaters.

Year of construction: 2013, condition: like new (used), functionality: fully functional, Trepko 222-1K rotary filling machine whit 2x moulds. Previously filling yoghurt products and other dairy products. Ncsdpfx Ahoydplcsvsp Mould No 1. Diameter 185 mm No 2. 90 mm. Year of construction 2013.