Coordinate measuring machine

Etalon DERBY 454

Condition: good (used), Year of construction: 2006, 1 used 4-axis horizontal machining center Brand Haas Type EC 1600 Year of manufacture 2006 Travel ranges X-axis 1626 mm Y-axis 1270 mm Z-axis 813 mm Spindle centerline to table 304 mm Spindle SK 50 Max. rated power 22.4 kW Max. speed 7500 rpm Max. torque 460.0 Nm 700 rpm Table size Length 1626 mm Width 914 mm T-slot width 16.00 mm T-slot center-to-center distance 125 mm Number of T-slots in standard configuration: 7 Max. load capacity on table (evenly distributed) 4536 kg Integrated 4-axis (B-axis) Table 1626 mm x 813 mm mm Clamping surface diameter 762 mm Adjustability 360° Max. workpiece swing diameter 1270 mm Table load 4536.0 kg Max. rated power 3.7 kW Rotational torque (continuous) 2712 Nm Backlash 30 arc-sec Gear ratio 500:1 Braking torque 5423 Nm Minimum resolution 0.001° Indexing accuracy ± 30 arc-sec Repeatability 15 arc-sec Rapid traverse rate on B axis 36°/sec Max. feed rate for machining on B axis 36°/sec Spindle centerline to table 146 mm Max. feed rate for machining in x, y, and z axes 12.7 m/min Rapid traverse rate on X axis 15.2 m/min Rapid traverse rate on Y axis 15.2 m/min Rapid traverse at Z 15.2 m/min Axis motors 30-station tool changer Max. tool diameter (full) 102 mm Max. tool diameter (adjacent positions empty) 254 mm Max. tool length 508 mm Max. tool weight 13.6 kg Tool-to-tool (average) 8.00 s Chip-to-chip (average) 12.60 s Hfodjv N Di Aopfx Ag Ieg General information Coolant tank capacity 360 L Dimensions Domestic pallet 488 cm x 366 cm x 346 cm Export crate 488 cm x 366 cm x 348 cm Weight 13608.0 kg

Condition: good (used), Year of construction: 2006, travel distance X-axis: 1,626 mm, travel distance Y-axis: 1,016 mm, travel distance Z-axis: 813 mm, overall weight: 13,611 kg, table length: 1,626 mm, table width: 914 mm, controller model: HAAS, nominal power (apparent): 22 kVA, rotary table diameter: 760 mm, spindle speed (max.): 6,000 rpm, table load: 4,536 kg, Equipment: chip conveyor, IBN 03/2006 IKZ 70 bar (TSC 1000) WZW 30-fold (BT50) Full 4th axis Spindle & gearbox new in 2017 1-shift operation Machine can be inspected under power Hodpfx Aevgmr Ijg Iofg !!!! free loading until CW04/2025 !!!! (with same-day delivery of our new machine)

Condition: good (used), Year of construction: 2013, Machining Center Fanuc Robodrill α-D21SiA5 Manufacturer: Fanuc Model: Robodrill α-D21SiA5 Year of manufacture: 2013 Axes: 5 Travel X axis: 300 mm Travel Y axis: 300 + 100 mm Travel Z axis: 330 mm Swivel range A axis: -90° – +90° Rotary axis C: 360° Table load capacity: 200 kg Maximum tool diameter: 40 mm Maximum tool weight: 3 kg Hfsdpfxex Hqwas Ag Ijg Maximum total tool mass: 33 kg Number of tools: 21 Spindle speed: 24,000 rpm No liability is assumed for the accuracy, completeness or timeliness of the information provided.

Condition: ready for operation (used), Year of construction: 2014, operating hours: 100 h, spindle speed (max.): 5,000 rpm, total height: 1,800 mm, overall weight: 2,200 kg, controller manufacturer: FANUC, controller model: 31t- Model B, number of axes: 3, This 3-axis EMCO MaxxTurn 65 SMY was manufactured in 2014, featuring a robust FANUC 31i B control system and a dual spindle setup with C and Y axes for complex machining. It includes a 12-position tool turret and a bar feeder with a capacity of 65 mm diameter and 3200 mm length. Ideal for precision turning and milling, this machine offers a comprehensive solution for advanced metalworking. Contact us for more information about this machine. Additional equipment • Automatic bar loading magazine with adjustable part length and bar diameter • Remnant extraction system • Guide channel made of polyurethane plastic • Displacement system for longitudinal movement Machine Benefits Qualitative Machine Benefits • No spindle reduction required Technical Machine Benefits • Cooling: thermocompensation system • Axes: c-axis and y-axis Hodpfox D H Sfex Ag Iefg • System: linear guide system, digital drive system • CATCHING DEVICE Pneumatically operated precast catching device for the gentle unloading of precast elements. The precast elements are transported into a catching box (standard) or onto a conveyor belt (optional). Max. precast element length: 175 mm Max. precast element diameter: 65 mm Max. • Tool system: 12-position tool turret, vdi30 radial • Driven tools: up to 12 driven tools • Sub-spindle speed range: 0–7000 rpm • Bar length capacity: 1200 – 3200 mm • Diameter passage: 20 – 65 mm • Feed speed: 0 – 627 mm/sec • Turning length is 650mm Extra Information Control Unit Control: Integrated PLC Features: Fully automatic work cycle, Monitoring and error diagnostics (display output) Tools Max Power: 6.7 kW Max Torque: 25 Nm Speed Range: 0–5000 rpm C-Axis: Available Media Power Supply: 200/220/400 V AC Air Requirements: Min. 7 bar Air Consumption: 45 L/min Mount Position (Assembly) Installation Kit includes vibration-absorbing, height-adjustable leveling shoes, and mounting brackets. Machine History Note: Machine like new with only 100 hours of use Dimensions Machine Depth 4500 mm

Condition: used, Year of construction: 2006, turning diameter Ø30/300mm mm turning length 3055mm +/-0.3mm mm weight of the machine ca. 4-6 t Hfsdpsugnxdofx Ag Iog

Condition: refurbished (used), Year of construction: 1988, Graver grinding machine Make: Maschinenfabrik Baden-Baden Model: FSS Year of manufacture: 1985 - overhauled, repainted RAL7012 basalt gray, RAL 7035 light gray Machine no.: 2992 Warranty: 12 months single layer from delivery, on the mechanics overhauled by us. The electrics and electronics are excluded, as they have only undergone a functional test. For machines located outside our northern Bavarian sales area, travel costs are to be borne by the customer. Hodetqdqgopfx Ag Iofg Accessories: - Grinding wheel with flange - Operating instructions incl. new electrics On/off switch in new housing with undervoltage coil to realize the restart protection z. e.g. in the event of a power failure or if the mains plug is pulled out Used as seen The machine corresponds technically the state of the year of manufacture at that time.

Condition: used, Year of construction: 2002, Technical details: x-travel: 505 mm y-travel: 405 mm z-travel: 405 mm measuring range X-axis: 505 mm measuring range Y-axis: 405 mm Hfedpfju S Izcjx Ag Ijg measuring range Z-axis: 405 mm compressed air: 0,4 MPa voltage: 100/120/220/240 V / Hz total power requirement: 700 Watt machine weight approx.: 0,5 t dimension machine xH: 1,1 x 1,1 x 2,185 m further features: -it is a linear measuring system with resolution 0.0001mm -measuring speed X/Y+Z-axes 430 mm/s -acceleration X/Y+Z-axes 980 mm/s² -measuring table made of granite, size LxW: 638 x 860mm, with workpiece clamp -max. tool size height max. 545mm weight max. 180kg Equipment: -Measuring probe Renishaw TP200 -Computer Fujtsu - Siemens Scenic P; protection class IP30 -without measuring probe -Software available (USB Stick) *

Condition: used, Technical details: dimensions of saw-band: 3400 mm saw band length: min. 3200 mm saw band width: 20 mm band speed: 6 / 12 / 25 / 75 / 150 m/min cutting speed: 15 - 1500 / steples m/min Table dimensions: 665 x 665 mm table height over floor: 1050 mm table swivelling to both sides: 15° / 30° Grad table feed: Länge: 250 mm total power requirement: 4,0 kW Hfsdpfjv T Th Nox Ag Ieg dimension machine xH: 1,2 x 0,9 x 2,2 m Steel and metal band saw with saw band cutting, welding and grinding device Saw band speed 2 steps, infinitely variable Infinitely variable table feed Tiltable table Machine lighting Stop bar *

Condition: used, Year of construction: 2004, machine/vehicle number: 575259, travel distance X-axis: 550 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 450 mm, For sale is a high-quality sinker EDM machine from the renowned manufacturer OPS Ingersoll. This machine is ideal for precise EDM operations in tool and mold making, and comes equipped with an extensive range of features. 🔍 General Information: Manufacturer: OPS Ingersoll Model: Gantry 800 Machine No.: 575259 Year of manufacture: 2004 Origin: Made in Germany Condition: Used, well-maintained, and fully operational ⚙️ Technical Specifications: Hodpew Ig A Hsfx Ag Ijfg Travel distances (X/Y/Z): 550 x 850 x 450 mm Worktable size: approx. 800 x 1000 mm Max. head load: 200 kg Max. clearance: 585 mm Max. traversing speed: 12,000 mm/min 💡 Equipment & Features: 30-position tool changer, EROWA Mitsubishi 64-bit CNC control (separate control panel) Programming software: MultiProg Control technology: Multipulse PRO Chuck: ER-016841 Integrated CO₂ fire extinguishing system Cartridge filter unit Dielectric cooling system by Weinreich Industriekühlung Extensive accessories and connection cables available ⚡ Electrical Data (as per type plate): Supply: 400 V / 3~ / 50 Hz Control voltage: 24 V AC / DC Power consumption: 17 A Fusing: 25 A Wiring diagram no.: 107258 Errors, typos and prior sale excepted.

Condition: good (used), functionality: fully functional, used 3D coordinate measuring machine Mitutoyo Euro C Apex 544 Hjdeuyiu Nepfx Ag Isfg On our marketplace, we offer a pre-owned Mitutoyo Euro C Apex 544 3D coordinate measuring machine that retains impressive reliability and measurement accuracy despite its older age. This machine has been extensively inspected and tested by our experts to ensure that it still meets the high standards of metrology. The Euro C Apex 544's precise measurements, robust construction and durable components make it an excellent choice for quality control in manufacturing today. It has been thoroughly calibrated and tested by us so that it is ready for use in your production. Technical data: Measuring range: X = 500 mm, Y = 400 mm, Z = 400 mm Manufacturer accuracy: ±2.9 µm + 0.3L/100 µm Drive: CNC-controlled, with fully automated measuring sequences Touch probe: Renishaw TP200 Software: Mitutoyo MCOSMOS Advantages: Proven reliability: this used machine has been thoroughly inspected, tested and calibrated by our metrology specialists to ensure continued precise performance. Stable precision: Thanks to its granite construction and proven Mitutoyo design, the machine delivers highly accurate and repeatable measurements even after years of use. Automation and efficiency: The CNC control and Renishaw TP200 touch probe enable fully automated, efficient measurements, optimizing your production processes. Reliable investment: Even as a used machine, the Mitutoyo Euro C Apex 544 offers a cost-effective solution for companies looking for a tried and tested 3D coordinate measuring machine. This machine is the perfect choice for companies looking for a proven and tested quality control solution. Despite its age, it has been extensively tested and calibrated to ensure maximum reliability and precision in your production.