ER-070649 Erowa UPC chuck

Erowa UPC Futter ER-139505, ER-070649

Condition: new, functionality: fully functional, Year of construction: 2025, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, High-strength welding bed Partitioned smoke extraction system Fully automatic butter injection system Fully automatic cutting, material saving, fast speed Cutting area 4000 × 2000 mm X‑axis travel 1520 mm Y‑axis travel 4020 mm Z‑axis travel 80 mm Ibjdpfx Asw A Iilelbeb Max. combined positioning speed 170 m/min Acceleration 2.8 G Machine dimensions (L×W×H) 9500 × 2900 × 2380 mm Footprint 10500 × 3400 mm Net weight 8500 kg

Year of construction: 2002, condition: good (used), Make: Matsuura Type: LX-O Control: YASNAC Year: 2002 Specifications Metric US Standard X - Travel 330 mm Y - Travel 300 mm Z - Travel 250 mm Table Length 540 mm Table Width 320 mm Table load 100 Feed rate X-Axis 90000 mm/min. Feed rate Y-Axis 90000 mm/min. Feed rate Z-Axis 90000 mm/min. Spindle Taper 30 ISO/Bt/Mk Isdpelz Rvlofx Albsbb Power on spindle 7.5 kW Speeds / ranges 40000 Rpm ATC / revolver 30 Chip conveyor Yes Dimensions (Estimate) Length 2800 mm Width 2600 mm Height 28000 mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 2003, Technical data: Swing diameter: 680 mm Distance between centers: 1000 mm Speed: 2800 rpm Chuck: ø300 mm Dimensions, approx.: 5560 x 2400 x 2130 mm Weight, approx.: 10,000 kg Equipment: - Control: Heidenhain CNC Pilot 4290 - 12-position turret VDM 40 Iodpfxeyfnqge Albsbb - C-axis

Condition: like new (used), Year of construction: 2018, operating hours: 5,000 h, functionality: fully functional, Machine type: CNC turning and milling center Manufacturer: DMG MORI Type: NLX2500SY/700 with Fanuc industrial robot, type R2000ic/165F Year of manufacture: 2018 Control system: M730 UM Mapps CELOS Country of origin: Japan Delivery time: upon agreement Incoterms: EXW Additional information: CNC turning and milling center DMG MORI NLX2500SY/700 Turning diameter max. 356 mm Turning length 705 mm Ijdpfozcpkiex Albjbb Control system: M730 UM Mapps CELOS Swinging diameter over bed 920 mm Swinging diameter over cross slide 742 mm Spindle speed range - main spindle 4,000 rpm Drive power - main spindle 18.5 / 15 kW Spindle nose: JIS A2-8 Spindle bore 80 (91) mm C-axis: 0.001° Spindle speed range - counter spindle 6,000 rpm Drive power - counter spindle 11 / 7.5 kW Spindle bore 43 mm C-axis: 0.001° X-axis travel: 260 mm Z-axis travel: 795 mm Y-axis travel: +/- 50 mm Rapid traverse rate (X / Y / Z): 30 / 10 / 30 m/min Number of tool positions: 12 Shank height for square tools: 25 mm Shank diameter of drills: 50 mm Tool change time: 0.27 sec. Spindle speed range - driven tools max. 10,000 rpm Drive power - driven tools 5.5 / 4.2 kW Total power consumption: 41 kVA Machine weight: approx. 6.4 t - Counter spindle - Tool drive - C, Y-axis Subject to errors in technical data. The scope of the accessories is exclusive and limited to the description in the text. No claims can be made regarding additional accessories shown, e.g. for illustrative purposes.

Condition: new, machine/vehicle number: 246203 xxxx, functionality: fully functional, Ideal basis for setting up CNC machines and applications The FB2 flatbed unit is ideal for getting started with CNC technology and is ideal for model making and hobby applications. The FB2 is also often used in industry for measuring and dosing technology, as it offers extensive expansion options. The unit also offers access to the isel modular system. Various sizes from travels of 530 x 500 mm to 1030 x 1250 mm and extensions such as base frame and housing are available and can be individually combined. BEST SUITABLE FOR: • modular isel building block system • universal range of applications • easy handling • ideal for laboratory, model making and workshop use • assembly and mounting • printing and engraving • drilling and milling • dosing and screwing • forming and modeling • gluing and casting • soldering and welding Ibodpfxshqmamj Albjb • measuring and testing • sawing and cutting and much more Z-passage = 190 mm (Z-passage = 300 and 500 mm on request!) FEATURES: • durable stepper motors in the 200 W range • reliable LES units with steel ball screws are installed as drives • clamping of workpieces using a T-slotted plate • available with and without protective cover • variable gantry apertures, depending on customer application OPTIONS: • iSA milling spindles and water-cooled HF milling spindles • Cooling spray device • Cold air cooling, Cool-Min • Automatic tool length measurement • Rotation units • Workpiece clamping systems (hand lever, vacuum clamping tables, etc.) • Suction systems • LED machine room lighting • RAL color selection • CAD/CAM-Software • Diffusers 190 mm, 300 mm or 500 mm • Powerful 4-axis control controller • Underframe • Enclosure with sliding/folding door

Year of construction: 2015, condition: new, Vertical furnace Ijdpfx Ajcdi D Dolbjbb height: 1100mm useable diameter: 790mm outside diameter: 1560 mm outer height (without lid): 1480mm outer height (with lid): 2300mm electrically heated: 40 kW circulating fan: 2,2 kW three-phase supply: 400 V, 50 Hz temperature: max. 750°C

Condition: reconditioned (used), Year of construction: 2009, functionality: fully functional, operating hours: 14,367 h, pressing force: 320 t, stroke length: 445 mm, table length: 4,420 mm, throat depth: 420 mm, clearance between the columns: 3,680 mm, total width: 5,300 mm, total height: 3,200 mm, overall weight: 25,000 kg, year of last overhaul: 2026, Equipment: CE marking, safety light barrier, Special equipment: + Front work area lighting + Rear back gauge system, 6 axes, with control cabinet air conditioning + ACB Easy communication bus (hardware side) + Hydraulic upper tool clamping + CNC-controlled lower tool positioning (I-axis) + CNC-controlled crowning Iedezdc A Ijpfx Albobb Machine - Sturdy machine frame in all-steel construction Stress-relieved pressure beam through annealing - 4-cylinder upper drive - Block hydraulics with low-noise double pump - Rear back gauge with CNC-controlled X and R axes - Hydraulic upper tool clamping - Hydraulic lower tool clamping - Control cabinet cooling via air-to-air heat exchanger - Network connection for machine control Control - TRUMPF TASC 6000 Safety - Standard safety devices

Condition: like new (used), Year of construction: 2013, operating hours: 39,945 h, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 580 mm, travel distance Z-axis: 400 mm, controller manufacturer: Heidenhain iTNC 530, total height: 2,900 mm, total length: 5,500 mm, total width: 2,650 mm, spindle speed (min.): 28,000 rpm, coolant supply: 40 bar, Year of construction: 2013 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 450 Y-axis travel mm: 580 Z-axis travel mm: 400 C-axis degrees: 360º (0,0001) A-axis degrees: +10 / -110º Feed rates m/min: 80 Rapid traverse m/min: 80 Acceleration in the axes m/s2: 13 Milling/turning table nc: Number of pallets: System 3R (21 pallets type GPS 240, 30pallets type GPS 120 and 24 pallets type ITS50) Table dimensions mm: baseplate for root pallet Maximum workpiece size (D x H) mm: for pallet GPS 240 (275x275x200mm); for pallet GPS 120 (150x150x200mm) and for pallet ITS50 (ø70x200mm) Max. workpiece weight kg: 150 (pallet + workpiece) Spindle Spindle speed rpm: 28000 Spindle drive power kW: 35/25 (40%ED/cont) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 600 Tool system Tool holder: HSK-A 63 Tool magazine slots: 120 Tool changer: Double gripper Equipment Electronic Handwheel Chip conveyor Infrared probe Ibodpfx Alsxv Av Robeb Internal cooling lubricant supply Rotating inspection windows Rinsing gun blowing air through spindle center selectable via M-function Laser tool measurement for measuring tool length and diameter 3D quickSET Arrangement for external pallet management Accuracy package Internal coolant supply Electrical cabinet active cooling unit Spindle active cooling unit Toolholders are not included Tools are not included Paper band filter Machine running times Under power: 62983 Spindle Working: 39945 Rated power kVA: 60 Basic machine dimensions / weight Length mm: 5500 Width mm: 2650 Height mm: 2900 Weight kg: 9500 + system 3R

Condition: used, Year of construction: 2008, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, torque: 46 Nm, controller manufacturer: HEIDENHAIN, controller model: 530, spindle nose: HSK A 63, number of slots in tool magazine: 170, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, CNC Heidenhain iTNC 530 WORKING AREA Longitudinal travel X: 800 mm Transversal travel Y: 600 mm Vertical travel Z: 500 mm B axis: +30° / -100° C axis: n x 360° WORK TABLE Table dimensions: 320 x 320 mm Maximum workpiece weight: 120 kg SPINDLE Spindle taper: HSK A63 Maximum spindle speed: 24.000 rpm Motor power 40% ED: 22 kW Maximum torque 40% ED: 46 Nm AUTOMATION Tool magazine capacity: 170 tools Erowa pallet changer: 7 positions Ibsdpfx Alsy Tam Rjbjb MACHINE EQUIPPED WITH • High-pressure coolant through spindle • Probe • Laser tool presetting • Chip conveyor • Oil mist cooling system • Rotoclear • ITC Intelligent Thermal Control • ITC-5X 5 Axis Intelligent Thermal Control • APS Advanced Process System • Remote electronic handwheel • Instruction manuals and CE declaration

Condition: used, Year of construction: 2011, Milling machine Quaser MV 184, year 2011. The machine is sold complete, as shown in the pictures. Includes hydraulic vices, power unit, chip conveyor, belt filter system and extraction unit. Iedpfx Aeyfm T Hslbjbb