Concrete silo 500L

Eichinger 1016.8

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, New unit, in stock, immediately available -Volume 18,000 liters -Maximum temperature 350°C -Internal dimensions (L x W x H) 4100 x 2100 x 2100 mm -External dimensions (with rails) 9970 x W 3060 x H (with lifting door) 6110 mm -Control system Eurotherm Nanodac -Temperature stability (at nominal temperature, without load) ±5 °C -Automatic inlet and outlet dampers -Electric lifting door -Electrically driven furnace car -Power 247 ± 9% kW -400 V, 50 Hz -Documentation, CE declaration We would be happy to offer installation and commissioning, as well as training for your employees. Please contact us! We offer new and used industrial furnaces. Inspections in our warehouse are available upon request! Bledpfeu Hma Njx Acnel Furnace, kilns, annealing furnace, firing furnace, hardening furnace, heating furnace, furnace, tempering furnace, sintering furnace, drying oven, industrial furnace, heating chamber, warming oven, temperature furnace, drying cabinet, chamber furnace, large-capacity furnace, bogie hearth furnace, car hearth furnace, shuttle kiln, bogie hearth kiln.

Year of construction: 2007, condition: used, functionality: fully functional, 5 x 148 m³ Aluminium Silo (Plastic Granulate Silo) Technical Data / Dimensions Available units: 5 Year of construction: 2007 Volume: approx. 148,000 liters Container type: Silo Condition: used Suitable for food: no Design: upright Internal diameter: approx. 3,500 mm Cylindrical height: approx. 14,900 mm Total height: approx. 17,500 mm Weight: approx. 3,500 kg Bsdpfx Acoxqr Ekjnsll Specific gravity of medium: 0.6 t/m³ Operating pressure: non-pressurized Ground clearance: approx. 770 mm Material / Properties Inner shell material: Aluminium Notes: Material grade: AlMg3 / AlMgSi3 Support design: Foot ring / stand collar Top bottom: cone roof Slope: approx. 15 % Bottom type: cone Cone angle: 90 degrees Top section: 1 x roof edge railing, height: 1,200 mm 1 x crossover walkway with railing 2 x crane eyes 1 x manway DN 600 with vent nozzle mounted 1 x connection flange for level measurement 1 x nozzle for level indicator 1 x flange DN 100 (filling) Shell: 1 x service door (approx. 1,800 x 850 mm) 1 x cable protection conduit 1 x filling line DN 100 ending in TW connection 1 x welded adapter for level indicator Bottom section: The silos end at the bottom in a 90° cone with DN 200 flange and emergency shut-off valve, as well as a mounted suction box.

Condition: new, fuel type: gasoline, overall weight: 1,300 kg, operation weight: 1,200 kg, maximum load weight: 1,500 kg, lifting height: 1,000 mm, Year of construction: 2026, Equipment: hydraulics, Befard XM1200 - NEW TECHNICAL SPECIFICATION: • Lifting capacity 1200 kg - PICK&CARRY • Lifting capacity 1500 kg - with optional equipment • 3 hydraulic extensions • Arm opening angle 65 degrees • Vertical reach 10 m - with optional equipment • Non-marking tracks • Extendable chassis in the range of 780-1250 mm • Radio control • Column rotation 50 degrees • Knee gear • Possibility of using a 500 kg or 990 kg winch - optional • LED lighting fixed + magnetic AVAILABLE POWER SUPPLY VERSIONS: 3in1 - petrol engine, electric motor (230 V, 400 V, 110 V to choose from) and lithium-ion batteries Combustion - powered only by internal combustion engine, Combustion electric - powered by internal combustion engine and electric 230 V, 400 V or 110 V OPTIONAL EQUIPMENT AVAILABLE: • Winch 500 kg or 990 kg to choose from • Manual JIB arm - increases the reach by 1 m - You can use 2 pcs. Manual Jib for the crane • Searching hook - works in 6 positions, increases the reach by 0.5 m • Hydraulic blade - An additional support blade at the front of the machine extends manually and lowers hydraulically. Additional options are available for the blade: • Forks • Tow hitch: Increases stationary lifting capacity to 1500 kg. Increasing the stationary lifting capacity to 1500 kg and the possibility of using an additional Jib arm • Radio control with display • Platform for standing on the machine - Platform for standing on the machine, as an increase in counterweight (not necessary in standard use) • Extension to the loading platform - Removable extension to the loading platform by approx. 500 m • Suction cup with hydraulic head - Suction cup with hydraulic head controlled from the remote control. Possibility of removing the suction cup and installing the hook. Head mounted at the end of the hydraulic extension • Holder for XP attached to the platform - Holder for XP glass gripper attached to the platform • RAL color - Choice of machine color from the RAL palette • Tow hook - Possibility of using a tow hook for the crane's transport platform • Ramps - Aluminum ramps 2.5 m long Befard XM1200 is a modern mini Pick & Carry crane designed for maximum functionality and mobility in difficult working conditions. Thanks to its compact dimensions, it easily fits through a standard door, and extendable tracks up to 1250 mm wide ensure stability and safety during crane operations. Bledpsx A Uc Aefx Acnol This versatile model offers an impressive reach of up to 10 meters - which allows work at the height of the second floor. The XM1200 mini crane can move with a load of up to 1200 kg, and with the use of support legs its maximum lifting capacity increases to 1500 kg. Optional equipment in the form of a winch additionally increases the flexibility of applications, making the XM1200 mini crawler crane an ideal solution for assembly, service, industrial or construction work. Possibility to test the equipment before purchase. * The price in the offer refers to the basic version powered by a petrol engine * ​​Product on order * Net price

Condition: good (used), 963 USED Thermo-oil bakery oven. TECHNICAL DATA: Baking surface: 12 m2 EXTERNAL DIMENSIONS (in cm.): - height: 260, - width: 175, - length: 260 + hood 70 We offer devices in various technical conditions and prices: 1. Directly from the bakery. 2. After inspection with a commissioning warranty. 3. After renovation with a 6-12 month warranty. The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... Bljdpfjvb Ubmox Acnol bakery oven, bakery ovens, rack oven, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices.

Condition: excellent (used), Year of construction: 2022, Several heat exchangers for sale from hydrogen pilot plant, please see detailed information attached. Two of them are electrical. Price 3000EUR each Blsdpsxlgpaofx Acnel

Condition: excellent (used), functionality: fully functional, fuel type: gasoline, color: blue, operation weight: 3,500 kg, lifting power: 1,600 kg/m, lifting height: 30,000 mm, tire condition: 80 %, Year of construction: 2012, operating hours: 2,500 h, We also offer crane rentals. AHK 30-1600 trailer crane, registered in Poland, UDT certificate valid until September 2026. • Maximum mast extension: 30 m • Outrigger spacing in standard setup: 6.25 x 5.90 m • Outrigger spacing with outriggers positioned on one side: 8.17 x 4.00 m • Total weight of the trailer with crane: approx. 3500 kg • Drive system controlled via a radio control system • Radio control with a display showing operating parameters • Mechanism for monitoring slack in the cable and a system for monitoring cable retraction • Option for remotely retracting the mast into the transport position Mast construction: Blodpfxeyugt Es Acnel • Made of durable steel and aluminum alloys • Integrated with the chassis • Equipped with a modern telescopic extension system Additional equipment: Rotating work platform with a lifting capacity of 250 kg, for 2 people Glass suction lifter

Year of construction: 1997, condition: excellent (used), functionality: fully functional, FOR SALE: 4 FOUR STAINLESS STEEL SILOS (INOX 304) – 500 m³ EACH Available for sale are 4 stainless steel silos, each with a capacity of 500 m³, constructed from INOX 304, suitable for storage and handling of dry bulk materials. Previous Use: The silos were used for loading dry materials into bulk tanker trucks (silo trucks). Technical Specifications: Capacity: 500 m³ (each) Total Height (including cone): 22.6 m (22,600 mm) Diameter: 5.7 m (5,700 mm) Material: Stainless Steel INOX 304 Silo Supports / Bases: Each silo is supported by 4 base structures Weight per base: approx. 60 tons Total base weight per silo: approx. 240 tons Base dimensions: Length 5,700 mm × Width 5,700 mm × Height 9,700 mm Location: Located in the Industrial Area of Volos, Greece Bledpfxey I Dk Ao Acnsl Dismantling & Transport: Available upon agreement: Dismantling Transport to Port of Volos Loading for export Quantity: 4 units Price per unit: €200.000 Total price: €800.000 Condition: Available / For Sale For further information or commercial inquiries, please contact us.

Condition: used, total length: 4,490 mm, Year of construction: 2013, load capacity: 5,500 kg, Crane Bedpeydfrlofx Acnsll Ormig 5.5tmE Drive Electric Year built 2013 Lifting weight (kg) 5,500

Condition: new, total length: 4,470 mm, Year of construction: 2025, load capacity: 25,000 kg, Crane JMG MC 250S Drive Electric Bsdpfx Ajxd Hw Iecnjll Year built 2025 Lifting weight (kg) 25,000

Condition: new, functionality: fully functional, Year of construction: 2026, CONSTMACH CS-500, a bolted-type cement silo with a capacity of 500 tons, is specially designed for large-scale concrete plants, cement terminals, and cement factories with high cement consumption. It is also widely used for the safe storage of limestone powder and similar materials. Blodpoxpi Nqjfx Acnjl Thanks to its modular design, the CS-500 model is easy to transport and can be quickly assembled on site. The silo offers long-term use with its high-strength steel body, sturdy foot structure, and precision manufacturing technology. Laser cutting and drilling methods are used in its production to ensure perfect fit and leak-proofness. All static and mechanical calculations for the CS-500 are performed using ANSYS Workbench CAE software, ensuring safe storage without any deformation under a 500-ton cement load. The silo is supplied complete with all equipment, including a maintenance platform, filling pipe, internal and external manholes, pressure relief valve, air filter, and butterfly valve. One coat of anticorrosive and two coats of epoxy paint applied to the silo provide maximum protection against external factors. It can also be equipped with a cement screw conveyor and manual discharge systems upon request. CS-500 - 500 Ton Cement Silo Technical Specifications Silo Capacity: 500 tons, 385 m³ (cement density 1.3 tons/m³) Silo Height: 19,945 mm Silo Diameter: Ø 6,180 mm Number of Silo Legs: 6 Silo Outlet Diameter: Ø 300 mm Number of Components: 250 Silo Weight: 28,000 kg Silo Leg Material: Ø273 x 12 mm Steel Pipe Silo Leg Supports: NPL 80 mm Metal Sheet Silo Leg Plates: 20 mm Conical Part Support Material: 200 mm Steel C Channel Conical Part Material: ST-37, 8 mm Metal Sheet Silo Body Material: ST-37, 8 - 6 - 5 mm Metal Sheet Silo Top Cover Material: ST-37, 6 mm Metal Sheet Filling Pipe: 4" Steel Pipe (up to the silo foot) Internal Manhole: Available External Manhole: Available Railing on Silo Roof: Available Maintenance Platform: Available Structural Analysis: Production process is carried out according to approved projects. Why Choose the CS-500 - 500-Ton Cement Silo? CONSTMACH CS-500 stands out not only for its high storage capacity but also for its durability, safety, and ease of installation. Manufactured based on engineering calculations, these silos operate smoothly for many years with minimal maintenance requirements. CONSTMACH offers reliable and economical solutions to its customers with equipment manufactured to high quality standards. Therefore, the CS-500 cement silo is one of the most sensible choices in terms of both performance and investment efficiency. What Does Constmach Do? Constmach is a leading machine manufacturer offering a wide range of products tailored to the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, rock crushing machines, rock crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.