Pre-shredder

Doppstadt DW3060

Condition: used, Year of construction: 2017, operating hours: 6,777 h, functionality: fully functional, Basic version DW 3060-F “Buffalo” (Carrier Machine) Central axle trailer chassis with 3 axles, 80 km/h road approval Brake system incl. ABS and lighting according to EC directive 50 mm EC towing eye incl. mounting bracket Hydraulically adjustable support leg Splash guards (inner and side mudguards) Permissible total weight 25,000 kg Tyres: 385/65 R22.5 Mercedes-Benz/MTU diesel engine 6R1300, 360 kW at 2,000 rpm, complies with EUROMOT IV emission standard Reinforced planetary gear 380 kW Additional hydraulic connection 20 l/min Hydraulic preparation for drive system Fuel tank 2 x 300 litres Rear conveyor: belt length 5,500 mm, belt width 1,200 mm, hydraulically foldable, with anti-magnetic centre section Longitudinal conveyor: belt length 3,300 mm, belt width 1,000 mm Centrally arranged lubrication strips 24 V electrical control system Roller reverse function via electric motor when engine is at standstill Automatically reversing fan Chassis with level control Acoustic start-up warning Doppstadt telematics system Paintwork: RAL2011 deep orange Optional equipment: Pgsdpfx Ahsxx Tfzeyek Hydraulic drive system SHREDDING SYSTEM SIZE “L” 600/4 COMPLETE Additional hydraulic connection 70 l/min Radio remote control Comb extension Size “L” Limiter Mounting for comb extension Limiter Size “L” Overband magnet for rear conveyor Frame for overband magnet Spraying system

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Pedpfxewp Rqfj Ahyjgk Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price:20,000.00 EUR (VAT is not included)

Condition: used, Year of construction: 2017, operating hours: 10,400 h, Equipment: Basic version DW 3060-F "Buffalo" Central axle trailer chassis with 3 axles, 80 km/h road approval Brake system incl. ABS and lighting according to EU directive 50 mm EU towing eye incl. adaptor shoe Hydraulically adjustable support leg Splash protection (mudguards inside and on the sides) Permissible total weight 25,000 kg Tyres 385/65 R22.5 Mercedes-Benz/MTU diesel engine 6R1300, 320 kW at 2,000 rpm, complies with emission standard EUROMOT IV Auxiliary hydraulic connection 20 l/min Hydraulic preparation for drive Fuel tank 2 x 300 liters Roller length 3,000 mm, diameter 600 mm Trapezoidal teeth for roller (21 pcs) and tooth bar (22 pcs) - Size L (174 mm, armoured) Rear conveyor belt: length 5,500 mm, width 1,200 mm, hydraulically foldable, with anti-magnetic central section Pgjdjyu Srmspfx Ahyek Longitudinal conveyor belt: length 3,300 mm, width 1,000 mm Centrally positioned wear strips 24 V electric control Roller reversing via electric motor when engine is off automatically reversible fan wheel Chassis with level control Acoustic start-up warning Doppstadt telematics system Paint finish: RAL2011 deep orange Additional equipment: Hydrostatic travel drive Radio remote control Attachment for comb extension Limiter Size “L” Comb extension Size "L" Limiter Wetting system Removable hopper extension plates on both sides Delivery date by arrangement

Condition: used, Year of construction: 2019, operating hours: 6,725 h, Equipment: Base version DW 3060-F "Büffel" Central axle trailer chassis with 3 axles, 80 km/h road approval Brake system incl. ABS and lighting in accordance with EC directive 50 mm EC towing eye incl. slip-on shoe Hydraulically adjustable support leg Splash guards (inner and side mudguards) Permissible total weight 25,000 kg Tyres: 385/65 R22.5 Mercedes-Benz/MTU diesel engine 6R1300, 320 kW at 2,000 rpm, complies with EUROMOT IV emission standard Auxiliary hydraulic connection 20 l/min Hydraulic pre-equipment for traction drive Fuel tank 2 x 300 litres Roller length 3,000 mm, diameter 600 mm Trapezoidal teeth for roller (21 pcs) and tooth bar (22 pcs) – Size L (174 mm, armored) Rear conveyor: belt length 5,500 mm, belt width 1,200 mm, hydraulically foldable, with anti-magnetic center section Discharge conveyor: belt length 3,300 mm, belt width 1,000 mm Centrally arranged lubrication strips 24V electrical control system Roller reversal via electric motor when engine is stationary Automatically reversible cooling fan Chassis with level control Acoustic start-up warning Doppstadt telematics system Paint finish: RAL 2011 deep orange Optional equipment: Pgsdpsy D Nicjfx Ahyjk Hydraulic traction drive Auxiliary hydraulic connection 70 l/min Radio remote control Overband magnet for rear conveyor Frame for overband magnet Moistening system Delivery date upon agreement

Condition: good (used), functionality: fully functional, mileage: 617,000 km, power: 302 kW (410.61 HP), first registration: 11/2011, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 4,500 mm, fuel: diesel, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel-air, Year of construction: 2011, Equipment: ABS, retarder, SUPERSTRUCTURE MEILLER XR 21 Z 2011 Wheelbase 4,50m (Passo) Good condition! Podpfx Aoqaglqehyegk

Condition: refurbished (used), Year of construction: 2019, operating hours: 5,225 h, overall weight: 25,000 kg, Doppstadt DW 3060 Biopower Type F - Year of manufacture: 2019 - Operating hours: 5,225 - Engine: MTU R61300 with 490 HP - AD BLUE - Weight: 25,000 kg - Remote control - Humidification system - Rear conveyor 5.5 m - Overband magnet Podpfx Ahoyxkwqjyogk - Hydraulic drive (self-propelled) - Central lubrication Machine is overhauled and immediately available.

Condition: excellent (used), Year of construction: 2009, Diesel engine: 430 HP Rear discharge conveyor, overband magnet, radio remote control. Pedpsh Ngukefx Ahyogk We can also offer financing if required.

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, CNC Turning and Milling Center - DMG GILDEMEISTER - CTX gamma 1250 TC YOM: 2009, until 2011 showroom machine, from 2012 operating The machine can be inspected by appointment in the factory under power. Pgodpfx Aow Hg Nlohysk Condition: Good (high accuracy), ready for immediate use. Spindle hours (August 1st, 2025): 9.580 h The heart of the machine is the integrated traveling column with turning milling spindle and interpolating B-axis. Machine basic data: * Part hollow clamping device (hydraulic) * C-axis * Cross slide above with turning/milling spindle as motor spindle, with hydraulic clamping in turning, tool holder: Capto C6 * Y-axis: +/- 200 mm * B-axis: +/- 120° * Disc-type tool magazine * Absolute, direct measuring systems in X-, Y-, Z1-axis * USB-interface, Ethernet interface TECHNICAL SPECIFICATIONS: * Control: Heidenhain CNC Pilot 4290, 3-D path control TURN PLUS Working area: * Swing diameter over bed: 630 mm * Turning diameter: 630 mm * Spindle distance: 1.510 mm * Bar diameter max.: 65 mm Main drive I: * Drive power (100% / 40% ED): 24 / 34 kW * Speed range from - up to: - 5.000 rpm * Speed of the C-axis: - 5.000 rpm Turning/milling spindle: * Tool holder: Capto C6 * Spindle speed: - 12.000 rpm * Drive power (100% / 40% ED): 13.2 / 22 kW * Torque (100% / 40% ED): 60 / 100 Nm Tool magazine: * Number of tools: 36 * Dimensions of the machine approx. (Width/Depth/Height): 6.860 x 4.220 x 2.530 mm * Total weight of the machine approx.: 18,5 tons EQUIPMENT: * Well equipped … * No steady rest available * Documentation complete available. Detailed technical data sheet and information on equipment available on request. There is no guarantee for correctness and completeness of the technical details and and accessories.

Condition: excellent (used), Year of construction: 2014, Diesel engine: 430 HP Rear duscharge conveyor Overband magnet Pjdpfx Asi Trvbohyegk Hydr. self-propelled drive (for moving on site) Radio remote control We can also offer financing if required.

Condition: refurbished (used), Year of construction: 2012, operating hours: 7,340 h, Doppstadt DW 3060K Büffel - Year of manufacture: 2012 - Operating hours: 7,340 - Engine: Mercedes Benz, 430 HP - Roller with 21 teeth - Crawler chassis - Remote control - Weight: 30,000 kg Pgodeyhyuyopfx Ahyjk Machine is overhauled and immediately available.

Condition: excellent (used), CPM 2000 granulator, 90kW engine Pgedpfxjwcdpns Ahysk die diameter 410mm We have several pieces

Condition: refurbished (used), Year of construction: 2014, overall weight: 25,000 kg, Doppstadt DW 3060 Buffalo type C - Year of construction 08/2014 - Operating hours 7275 - Engine Mercedes Benz 430 HP - AD Blue - Roller : 21 teeth - Overband magnet - Remote control - Hydraulic drive ( self drive) Pgsdpfx Ahjygnk Asysk Machine is overhauled and immediately available

Condition: new, Year of construction: 2025, Economical solutions with short delivery times Conveyor belts suitable for all common screening machines such as Doppstadt SM518 / SM618 / SM620 / SM720 / Terra Select T4-T7, Komptech Max, Mustang and others Conveyor belts suitable for all common shredders such as Doppstadt Bison / Büffel / Mamut, Biopower, AK 430, AK 235, AK 635 and others Manufactured according to your specifications: Pgodpfoxmvplox Ahyjk - Unlimited length - Width up to 1800 mm - 2, 3, or 4 material layers - Various profiles - Steel wire quantity: 10cm/ 35 +/-1 - in various material thicknesses Conveyor belts of the highest quality

Condition: reconditioned (used), functionality: fully functional, approx. 4.5 m long infeed and centering table Drive via chain from the feed motor Centers the logs in the middle of the rotor Debarking machine VK 26 4 main cutters 4 pre-cutters 30 KW main motor Podpfx Asu Hmacohyjgk 11 KW feed unit non-driven extraction table Machine workshop checked Machine cleaned and repainted

Condition: excellent (used), Year of construction: 2015, operating hours: 2,000 h, functionality: fully functional, Type: DW 3060 Type D Year of manufacture: 07/2015 Location: Germany Operating hours: 1,950 h Available from: by arrangement Specification: Diesel engine MTU R 1300 EUROMOT IV, 320 kW Total weight: approx. 25,000 kg Hydrostatic drive 18-channel wireless remote control Rear conveyor 5.5 m, hydraulically foldable Comb extension Moisturizing system 21 roller teeth, Form C DoubleLock quick-change system 20 trapezoidal comb teeth Overband magnet Hopper extension Service details The machine is in very good technical and optical condition Pgsdpfxoxrtt Ee Ahyjk Before delivery, the machine will receive a brand new planetary gearbox Before delivery, the machine will be technically inspected and serviced The machine is sold in the condition existing at the time of handover. The seller assumes no liability for defects. Interim sale, changes, and repairs reserved.