Machining Center - Universal

DMG DMU 50 Evolution

Condition: good (used), Year of construction: 2000, Hello I have for sale a 5 axis CNC milling center DECKEL MAHO DMU 50 V evolution. The machine is connected and working. _ Type: 5 axis milling center Manufacturer: DMG DECKEL MAHO Model: DMU 50 V evolution Control: HEIDENHAIN TNC430 Country of manufacture: Germany Bdedpfstt Ntfex Aa Dob Year of manufacture: 2000 _ Machine parameters: - number of axes: 5 - working table dimensions (length x width): 500 x 380 mm - maximum spindle speed: 18,000 rpm - spindle power: 15 kW - X/Y/Z axis travel: 500/420/380 mm - C/B axis travel: 180/360 degrees - maximum feed rate: 20 m/min - total power: 40 kVa - machine dimensions (L x W x H): 2800 x 2300 x 2600 mm - total weight: 6000 kg

Condition: reconditioned (used), Year of construction: 2016, With Siemens 840 D sl Operate CNC control system Year of manufacture: 2016 Travel ranges: X 400 / Y 400 / Z 375 mm Spindle speed range: 20 – 20,000 rpm, stepless Including the following accessories: - NC rotary tilting table 450 mm x 400 mm incl. table cooling - 60-position tool changer with double gripper (HSK 63) - 50 pcs. HSK 63 tool holders - 3D Renishaw measuring probe - Electronic handwheel - Lang zero-point clamping system with vices - ICS 40 bar with paper band filter - Scraper belt chip conveyor - Bed flushing - Active cooling unit for control cabinet - Spindle cooling: water circulation - Rotoclear - Chip washdown gun - Direct path measuring system - Air blast through spindle center - 3 height-adjustable machine feet - Operating manuals Bdjdpfoylpa Njx Aa Djb

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, CNC Turning and Milling Center - DMG GILDEMEISTER - CTX gamma 1250 TC YOM: 2009, until 2011 showroom machine, from 2012 operating The machine can be inspected by appointment in the factory under power. Condition: Good (high accuracy), ready for immediate use. Spindle hours (August 1st, 2025): 9.580 h The heart of the machine is the integrated traveling column with turning milling spindle and interpolating B-axis. Machine basic data: * Part hollow clamping device (hydraulic) * C-axis * Cross slide above with turning/milling spindle as motor spindle, with hydraulic clamping in turning, tool holder: Capto C6 * Y-axis: +/- 200 mm * B-axis: +/- 120° * Disc-type tool magazine * Absolute, direct measuring systems in X-, Y-, Z1-axis * USB-interface, Ethernet interface TECHNICAL SPECIFICATIONS: * Control: Heidenhain CNC Pilot 4290, 3-D path control TURN PLUS Working area: * Swing diameter over bed: 630 mm * Turning diameter: 630 mm * Spindle distance: 1.510 mm * Bar diameter max.: 65 mm Main drive I: * Drive power (100% / 40% ED): 24 / 34 kW * Speed range from - up to: - 5.000 rpm * Speed of the C-axis: - 5.000 rpm Turning/milling spindle: * Tool holder: Capto C6 * Spindle speed: - 12.000 rpm * Drive power (100% / 40% ED): 13.2 / 22 kW * Torque (100% / 40% ED): 60 / 100 Nm Tool magazine: * Number of tools: 36 * Dimensions of the machine approx. (Width/Depth/Height): Bjdpfx Aaow Hg Nle Djdb 6.860 x 4.220 x 2.530 mm * Total weight of the machine approx.: 18,5 tons EQUIPMENT: * Well equipped … * No steady rest available * Documentation complete available. Detailed technical data sheet and information on equipment available on request. There is no guarantee for correctness and completeness of the technical details and and accessories.

Condition: used, Year of construction: 1999, x-travel 600 mm y-travel 525 mm z-travel 500 mm table surface area 1000 x 543 mm spindle taper SK 40 spindle taper DIN 69871 Bdodpfjtqqmhex Aa Deb spindle turning speed - stepless 20 - 12.000 U/min feed X/Y/Z-axis 20 - 10.000 mm/min rapid traverse X/Y/Z axis 18 / 18 / 15 m/min table load max. 350 kg control HEIDENHAIN MillPlus milling-head swivable +/- 90 ° total power requirement 26 kVA weight of the machine ca. 4,2 t dimensions of machine L x W x H 2,95 x 2,1 x 2,26 m Accessories: various tool fixtures, coolant

Condition: used, Year of construction: 2000, operating hours: 13,024 h, functionality: fully functional, machine/vehicle number: 14248, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, controller manufacturer: Heindenhain, spindle speed (max.): 16,000 rpm, operating hours of spindle: 12,420 h, coolant supply: 40 bar, spindle nose: HSK63, number of slots in tool magazine: 30, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Hermle C800V Used tool milling machine, year of manufacture 2000 HSK 63 (30 positions) Heidenhain TNC430 Internal cooling (rotary union should be replaced) Bedpfx Aaox Exxij Dedb Bellows of the cabin roof is defective The machine can be inspected under power by appointment. The machine is available for immediate delivery.

Condition: used, Year of construction: 2003, pressure 250 t stroke 20 - 190 mm no. of strokes 25 - 140 /min throat 460 mm passage to the back 590 mm Bdedpfxsvuun Te Aa Dob dayligth 690 mm table surface area 1500 x 880 mm hole in the table 950 x 250 mm table height over floor 900 mm ram surface 870 x 725 mm ram adjustment 120 mm power requirement 30,0 kW Weight 32,0 t dimensions of the machine ca. 2,34 x 2,38 x 3,99 m x m x m permitted for manual loading and automatic mode according to the CE-norm with infinitely variable drive, light guard (make Sick), hydraulic clutch/brake combination, hydraulic overload protection in ram, automatic stroke adjustment, motoric ram adjustment, pneumatic counterbalance in ram, fix table, drawing cushion in table (20 t), motoric centralized lubrication, operator's console with two-hand operation Width between the tie rods in front 940 mm Side passage 900 mm

Condition: used, TECHNICAL DETAILS - Number of spindles : 2 - Number of axes : 2 MAIN SPINDLE - Spindle speeds : 6500 [rpm] - Max. bar diameter : 42 [mm] - Max. turning diameter : 120 [mm] - C axis indexing precision : 0.1 [°] COUNTER-SPINDLE - Spindle speeds : 6500 [rpm] - Max. bar diameter : 42 [mm] - C axis indexing precision : 0.1 [°] POWER SUPPLY - Supply voltage : 230 [V] - Total installed power : 7.5 [kW] WEIGHT & DIMENSIONS - Machine floor space : 5.400 x 1.900 [mm] - Machine height : 2.000 [mm] - Machine weight : 5.000 [kg] MACHINE HOURS - Number of hours under power : 33912 [h] - Number of working hours : 21069 [h] EQUIPMENT - CNC : FANUC 160i - Coolant tank - Chips conveyor - Parts catcher Bdedpfxou E U Ufe Aa Deb - Parts conveying strip

Condition: used, Year of construction: 1985, x-travel 485 mm y-travel 385 mm z-travel 380 mm table surface area 800 x 460 mm spindle taper SK 40 control CONTOUR 1 spindle turning speed range 50 - 2500 U/min feeds 10 - 1000 mm/min rapid traverse 2 m/min table load capacity 600 kg quill stroke 80 mm total power requirement 7,5 kW weight of the machine ca. 2,0 t dimensions 2,4 x 1,7 x 1,98 m Acc.: vertical head with hydr. tool clamping and quill retraction, solid table, coolant - movement of X/Y/Z also possible via handwheels - Bedstqqllopfx Aa Dedb

Condition: used, Eccentric punch press HAULICK + ROOS type RVD 125 double column - eccentric press Machine No. 212560 Year of construction 1981 pressure force 125 ton. table size 880 x 800 mm table opening 470 x 140 mm column width 900 mm column width lateral 415 mm ram stroke 45 mm Bdjdohlnzkepfx Aa Deb slide adjustment travel 0-80 mm Installation height on the picture 340 mm Stroke rate 50 to 300 strokes/min. Motor power main drive 22 kW Mains connection 380 volt, 50 Hz - Double connecting rod drive with 4-fold eccentric shaft for off-center ram pressure load - adjacent electrical cabinet - NC roll feed EBU, width 250 mm, year 2003 - adjacent control panel for roll feed - strip running direction from left to right space requirement (press) L x W x H 3000 x 2000 x 3020 mm transport height 2950 mm weight of the press approx. 11 ton.

Condition: used, Year of construction: 2014, total height: 1,950 mm, total length: 2,400 mm, total width: 1,600 mm, Empty weight: 2.000 kg Price: On request - Year: 2014 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 3098034 - Drive system: CNC - Centre height [mm]: 450 - Swing over bed [mm]: 900 - Distance between centres [mm]: 900 - Bed width [mm]: 445 - Spindle bore [mm]: 60 - Max. spindle speed [rpm]: 1800 - X-axis travel [mm]: 203 - Z-axis travel [mm]: 762 Bdsdpfxoxq Aqwo Aa Dob - Transport dimensions: 2400mm x 1600mm x 1950mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum