VDI tool holder / toolholder

diverse Hersteller VDI40-E2, Bohrhalter; ø-Aufnahme

Condition: used, Year of construction: 2003, Technical data: Swing diameter: 680 mm Distance between centers: 1000 mm Speed: 2800 rpm Chuck: ø300 mm Dimensions, approx.: 5560 x 2400 x 2130 mm Weight, approx.: 10,000 kg Equipment: - Control: Heidenhain CNC Pilot 4290 - 12-position turret VDM 40 Dsdeyfnqgspfx Akvjwa - C-axis

Condition: used, Year of construction: 2003, turning diameter max. 246 mm turning length 600 mm control 840 D Powerline Siemens greates pass round over bed 400 mm Swing dia. over traverse guideway 300 mm centre distance 600 mm turning speed range - main spindle max. 6.000 min/-1 power capacity - main spindel 16 kW max. Torque 155 Nm spindle diameter in front bearing 100 mm spindle bore 68,5 mm spindle nose 140H5 Djdsypv Tqopfx Akvewa Spindle speed range subspindle max. 4.000 min/-1 power capacity - Sub spindle 7,5 kW max. Torque 48 Nm spindle diameter in front bearing 75 mm spindle bore 37 mm spindle nose 140H5 number of toolpositions 12 pos. Number of driven toolspositions 12 pos. Spindle speed - driven tools max. 5.000 min -1 power capacity - driven tools 3,7 kW max. Torque 24 Nm tool taper VDI 30 Tool dimensions with square shank 20 x 20 mm x-axis 160 mm z-axis 450 mm rapid traverse X: 60 m/min rapid traverse Z: 45 m/min Feed force X: 2,5 kN Feed force Z: 4 kN rapid traverse C: 200 1/min max. Torque C: 155 Nm total power requirement 32 kVA weight of the machine ca. 3,8 t dimensions of the machine ca. 8,0 x 3,0 x 2,7 m CNC - Turning- and MillingCenter GILDEMEISTER - CTX 320 linear V5 - Main- and Subspindle - tool-drive - C-Axis - ShopTurn

Year of construction: 2003, condition: ready for operation (used), A CNC twin-spindle lathe Gildemeister with a Y-axis is available. Bar capacity: 32mm, tool stations: 2x12, speed main and sub-spindle: 8000rpm, control: Siemens Sinumerik 840D Powerline, operating hours: 39426h, spindle hours: 25529h. Including coolant system, tools and short bar loader 1500mm Iemca Vip 80E. Documentation available. On-site inspection is possible. Expected to be available starting end of April 2026. Dwedpsygw Svofx Akvoa

Condition: new, Load Weight Shelf 42000 kg Loading weight per level 3000 kg Number of load levels 2 x 7 Stk. Djdpfxjfgyhde Akvewa Recommended material length 6000 mm Column width 3000 mm Shelf height 2440 mm dimensions m

Condition: ready for operation (used), Year of construction: 2008, EMCO MAX TURN 45, including LM 1200. Includes chip conveyor. More images will follow. Dodpfx Aozhl Nwskvowa

Condition: good (used), Year of construction: 2023, operating hours: 1,382 h, functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 300 mm, spindle speed (max.): 10,000 rpm, CNC Milling Machine Manufacturer: EMCO, Type: Emcomill E 350 Dedpfx Akszil Rkjvswa Year of manufacture: 2023 Operating hours: only 1,382 hours Technical data Manufacturer: EMCO Type: Emcomill E 350 Year of manufacture: 2023 Operating hours: 1,382 h X-axis: 350 mm Y-axis: 250 mm Z-axis: 300 mm Tool holder: SK 30 Tool magazine: 20 pcs Operating voltage: 400 V / 50 Hz Power consumption: 7 kW Spindle speed: 10,000 rpm Workpiece weight: max. 100 kg Slotted table dimensions: L 520 x W 300 mm Dimensions: L 2.50 x W 2.20 x H 2.50 m Weight: approx. 2 t Equipment • Siemens 828 D control system • Enclosed cabin • 3-axis CNC milling machine • Chip conveyor • Tool package with various tool holders • 20-position tool magazine • High-pressure coolant system (8 bar) • Tailstock • Machine documentation All information is without guarantee. A demonstration is possible at any time in our showroom.

Condition: used, Fette thread rolling unit T42, cross Please, contact us for getting more informations and pictures on or Dsdpfx Asft Tk Hokvswa *

Year of construction: 1998, condition: ready for operation (used), Swing diameter over bed/cross slide: 430mm/210mm, distance between centers: 510mm, travel X/Z: 160mm/310mm, spindle speed: 6300rpm, rapid traverse: 20m/min, tool positions: 12, tool holder: VDI30. Machine dimensions X/Y/Z: approx. 2250mm/2000mm/2000mm, weight: approx. 2600kg, control: Fanuc Series 21-T, operating hours: approx. 40000h. The hour counter was reset after each repair. The machine has electronic issues that cause sporadic system failures. An on-site inspection is possible. Djdoxmkcaopfx Akvowa

Condition: used, mileage: 1,001 km, power: 9 kW (12.24 HP), gearing type: other, fuel type: diesel, color: blue, empty load weight: 1,070 kg, number of seats: 2, first registration: 02/1954, total length: 2,100 mm, total width: 1,720 mm, driver cabin: other, Vehicle location: Bovenden, Manufacturer/Brand: Lanz Model series: Alldog Model: Alldog A 1215 Construction: Half-frame construction Production period: 1953?1954 Number of units: 2,115 Dodpfx Akjvhlkrevswa Dimensions Own weight: 980 kg Length: 3,750 mm Width: 1,620?2,180 mm Height: 1,700 mm Wheelbase: 2,234?2,306 mm Ground clearance: 390 mm Track width: 1,250-2,000 mm Turning radius with steering brake: 2,600 mm Standard tires: front: 5.50-16 Rear: 7-24 Engine power Rated power: 8.8 kW, 12 hp Rated speed: 2,800 rpm Number of cylinders: 1 Displacement: 533 cm³ Fuel: Diesel/petrol Cooling system: Air cooling Drive system Drive type: Rear-wheel drive Gearbox: 5V/1R Top speed: 19.8 km/h ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Year of construction: 2007, condition: ready for operation (used), A CNC short-bed turning machine Emco is available. Travel X/Z: 100mm/300mm, max. turning diameter: 85mm, max. swing diameter: 250mm, max. turning length: 255mm, center distance: 405mm, max. bar capacity: 25.5mm, spindle bore: 30mm, spindle speed: 6300rpm, tool stations: 12, tool interface: VDI16, rapid traverse: 15m/min. Machine dimensions X/Y/Z: approx. 1700mm/1300mm/1850mm, weight: approx. 1400kg, control: Siemens Sinumerik 810D, operating hours: approx. 27000h, spindle hours: approx. 11000h. Including bar feeder. The spindle was replaced in 2021 at approx. 25000 operating hours. Documentation available. An on-site inspection is possible. Dwjdpfx Akozhnt Sjvea