Sorting belt Sorting conveyor belt

DIMTER

Condition: used, Year of construction: 2001, Wood dimensions to be processed: Input lengths min/max 500 - 6500 mm Full optimization up to max. 1500 mm Input widths min/max 40 - 300 mm Input thicknesses min/max 15 - 120 mm Wood cross-sections max. 300 x 40 mm max. 200 x 120 mm Fixed lengths after sawing min. 510 - 2800 mm Special application: Cutting blocks, length min/max. 100 - 200 mm (Caution: Multiple block lengths at the sorting line; blocks are transported to the end of the sorting line and fall into the customer's grid box). Cutting/cutting tolerance +/- 0.8 - 1.5 mm (for wood types with minimal resin content and an even surface. Tolerance up to 1 m fixed length, max. tolerance for longer pieces up to 2.5 m). Thickness tolerance +/- 3 mm. Curvature of the wood in all directions: max. 10 mm per meter in length. Wood types: soft or hardwood. System performance: Feed speed, continuously adjustable up to max. 230 m/cutting cycle 0.6 - 1. To obtain the practical output per day, an effectiveness factor dependent on the customer's production conditions must be calculated. Infeed and saw height: 900 mm (placed on customer's platform, saw requires concrete base). Sorting working height. 2000 mm Connection values: Total electrical connection value approx. 18 kW Operating voltage 380 Volt / 50 Hz Voltage fluctuations max. 5% Air consumption approx. 1200 NL/operating pressure approx. 8 bar Extraction speed approx. 30 m/nd Color pebble gray RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Item 1 Infeed and marking station with 1 side support table, adjustable 1 table as stop edge Item 2 Support roller without drive, front side in front of sheet metal table for easier feeding Item 3 Length measuring station with built-in fluorescence camera for detecting error markings Item 4 Automatic width measurement, contactless Item 5 OptiCut 304 optimizing cross-cut saw - right-hand version with built-in waste chute including equipment package for large wood cross-sections Graphic input terminal (16 x 40 characters, Numeric keypad) with software package for optimization and system control. Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Item 6: Outfeed conveyor as sorting station with drive unit, length 7500 m Item 7: 2 ejectors mounted on the outfeed conveyor Rbedpfxsw Sy T He Ahzst Storage location: Nattheim

Year of construction: 2025, condition: new, The Unstacker Fully automatic destacker Designed for sawing 2-edged and 4-edged cant Productivity - 120 m3 per shift (10 hours) Rbjdpfohbr Ufsx Ahzst

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, ### Weinig Dimter OptiCut 350 – Optimizing cross-cut saw The Weinig Dimter OptiCut 350 is a high-performance Optimizing cross-cut saw widely used in the woodworking industry for precise cut-to-size operations with simultaneous material optimization. This machine ensures high-speed, accurate cutting, maximizing raw material efficiency while minimizing waste. Year of manufacture: 2005 Technical condition: Very good --- Technical Specifications: 1. Input material length: - Maximum length: 6,200 mm - Minimum length: 500 mm 2. Material width: - Maximum width: 300 mm Rsdpfx Ahsv Dm U Rozebt - Minimum width: 40 mm 3. Material thickness: - Maximum thickness: 100 mm - Minimum thickness: 15 mm 4. Cutting speed: - Maximum cutting speed: 250-350 cuts per minute - Feed speed: up to 200 m/min 5. Cutting tool: - Saw blade rotational speed: approx. 3,000 RPM 6. Control system: - CNC control with an advanced PLC system for precise cutting process management. - Optimization data input to maximize material utilization and minimize waste. - Touchscreen interface for easy machine operation and parameter input. 7. Optimization system: - Equipped with a defect recognition system (manual or automatic defect marking) to eliminate defective sections during cutting. - Length optimization function based on production requirements (e.g., minimizing waste, maximizing output of specific lengths). 8. Material feeding system: - Automatic feeding system for seamless material input. - Integrated conveyors and transport systems for efficient material flow through the machine. 9. Waste management: - Automated waste removal and sorting system to separate defective wood fragments. - Number of ejectors: 9 unit 10. Cutting accuracy: - High precision cutting with an accuracy of ± 0.5 mm, depending on wood parameters and machine settings. 11. Power supply: - Standard power supply: 400 V, 50 Hz --- ### Additional Features: - Automatic defect marking: The operator can mark defects on the wood (e.g., knots, cracks), and the machine automatically optimizes the cutting process to avoid these sections. - Safety features: Equipped with modern safety systems, including lock sensors and protective covers. --- Applications: The Weinig Dimter OptiCut 350 is ideal for woodworking industries, especially in facilities producing structural wooden components, furniture parts, and solid wood processing plants. Thanks to its optimization capabilities, this machine significantly increases productivity and efficiency while reducing material waste.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Wood finger-jointing line Weinig Grecon ProfiJoint Year of manufacture: 2013 Technical condition: very good Technical data: Working width: 40–150 mm Working height: 18–50 mm Working length: 6100 mm Milling unit: Infeed material length: 150–700 mm Material width: 40–150 mm Material thickness: 18–50 mm Jointing options: horizontal and vertical joints Milling spindle power: 18 kW Scoring cutters Hydraulic end press Grecon PJ7/6100: Maximum finished element length: 6100 mm Saw blade diameter: 350 mm Cutting unit power: 2.2 kW The machine underwent a complete overhaul and modifications in 2022 and operates in automatic mode. Only one operator is required for operation. Installation, commissioning and operator training available at an additional cost. Rsdpfxeyf N Slj Ahzobt

Condition: new, 3000 mm Working width 360 mm Wheel width 360 mm roll diameter 60 mm 900 kg height adjustment 650 - 1100 mm Redpfsfv Attex Ahzjbt weight of the machine ca. 0,050 t dimensions 3,1 x 0,45 x 0,6 m

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Wood finger-jointing line Weinig Grecon ProfiJoint Year of manufacture: 2013 Technical condition: very good Technical data: Working width: 40–150 mm Working height: 18–50 mm Working length: 6100 mm Milling unit: Infeed material length: 150–700 mm Material width: 40–150 mm Material thickness: 18–50 mm Jointing options: horizontal and vertical joints Milling spindle power: 15 kW Hydraulic end press Grecon PJ7/6100: Redpfx Ajyf N Itohzobt Maximum finished element length: 6100 mm Saw blade diameter: 350 mm Cutting unit power: 2.2 kW Installation, commissioning and operator training available at an additional cost.

Condition: used, Year of construction: 1999, functionality: fully functional, mount diameter: 50 mm, type of input current: three-phase, tool diameter: 50 mm, tool length: 330 mm, input frequency: 50 Hz, Tool presetting device WEINIG Opticontrol Swing diameter: 0 - 300 mm Tool length: 0 - 330 mm Shank diameter: 50 mm Rbodpfexwnvrsx Ahzet

Condition: used, Planer profiling milling machine WEINIG Profimat 26 Super Rbsdpswqda Nofx Ahzot Working width 20 - 230 mm (260) Working height 8 - 120 mm (140) 5 working spindles Ø 40 mm Long infeed table (approx. 2000 mm) Bottom working spindle 4 kW / left + right 7.5 kW / top 5.5 kW / bottom finishing 5.5 kW Pneumatic pressure of feed rollers Cardan feed infinitely variable 5 - 24 m/min Feed roller before jointer Control - push button operation automatic lubricant pump mechanical digital displays Machine in CE design Year of manufacture 2001 Without machining tools Machine is WORKSHOP OVERHAULED in GOOD CONDITION Machine is connected and ready for demonstration in exhibition center Ex stock Lieboch

Condition: used, Milling spindle Milling spindles for finger joint cutters Finger jointing machine various lengths various models In stock at www.joema-shop.com Manufacturers: GreCon, Sauter, DIMTER Rbsdpfxjqwgrpe Ahzst

Year of construction: 2005, condition: ready for operation (used), This WEINIG Unimat 500 was manufactured in 2005. A robust woodworking machine featuring a working range of 230 x 120 mm and five spindles, it ensures efficient processing with variable feed speeds from 4 to 30 m/min. Spindle power outputs include 4 kW for infeed and outfeed, and 7.5 kW for right/left and top spindles. Consider the opportunity to buy this WEINIG Unimat 500 woodworking machine. Contact us for more information about this machine. Additional equipment • Includes approx. 70 cutter heads Z4 • Several hundred new serrated-back knife blanks Machine Benefits Qualitative Machine Benefits • Groove guidance and hydraulic nuts Technical Machine Benefits • Working range (wxh): 230 x 120 mm • Number of spindles: 5 Rbodpfx Ajyaihpshzot • Variable feed speed: 4 – 30 m/min • Spindle power output: bottom (infeed): 4 kw / right / left: 7. 5 kw each / top: 7. 5 kw / bottom (outfeed): 4 kw

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, The machine is currently in use. We offer live demonstration, dismantling loading, installation and training on your site Rjdpfxov Uab Es Ahzebt

Year of construction: 1997, condition: ready for operation (used), overall weight: 10,500 kg, total height: 2,000 mm, This Grecon Dimter FDL-F 205/600/500 was manufactured in 1997. It is designed for woodworking applications, offering robust performance and reliability. Ideal for handling a variety of wood processing tasks efficiently. Contact us for more information about this machine. Additional equipment • Press (Face Press): Pressing Pressure 6 - 12 t and power consumption of 52 kW • Compressed Air Consumption: 350 NL/min for milling machine, 500 NL/min for press • Suction Volume: 10600 m³/h • The machine ensures fast transport cycles with precise alignment Rbsdpfjyabawox Ahzot • Includes a hydraulic pressing system for continuous jointing • Features integrated dust extraction and suction systems Machine Benefits Technical Machine Benefits • Feeding & transport: conveyor belt with a speed of 75 m/min and power of 11 kw / feeding & transport: conveyor belt with a speed of 75 m/min and power of 11 kw / threading station max feed speed: 120 m/min, power consumption 22 kw • Workpiece dimensions: length: 150 - 2000 mm / width: 50 - 205 mm / height: 35 - 50 mm 60 / final length: 3000 - 00 mm • Milling machine: turbo milling combination with power consumption of 63 kw / milling spindle motor: 22 kw, 3000 rpm / chipper motor: 55 kw, 2880 rpm Dimensions Machine Depth 18500 mm

Condition: excellent (used), functionality: fully functional, Grecon Dimter OptiCut 304R Optimizing Cross-Cut Saw Minimum input wood length: 500 mm with loading onto support table Minimum input wood length: 900 mm with loading via cross chain conveyor Maximum input wood length: 6300 mm Wood width min./max.: 40-200 mm Wood thickness min./max.: 15-80 mm Maximum wood cross-sections: 200×25 mm, 170x50 mm, 80x80 mm, 140×60 mm Saw blade diameter: 400 x 30 mm Saw blade rotational speed: 4200 rpm Maximum feed rate: 230 m/min Cutting modes: - Fixed length cutting - Lumber length optimization for maximum yield Redpsx Up Nqefx Ahzsbt - Defect removal with chalk defect marking

Condition: new, Year of construction: 2023, Application combs 15 mm Application combs 20 mm finger joint profile 15 mm finger joint profile 20 mm delivery time 3 days Rodjiacbpspfx Ahzebt

Year of construction: 1998, condition: ready for operation (used), spindle motor power: 11,000 W, spindle speed (max.): 6,000 rpm, This Weinig Unicontrol 10-5 was manufactured in 1998. A robust used window manufacturing machine, it features a working width of 40-220 mm and motor powers up to 15 kW for various machining units. It includes advanced features like a synchronization device, electronic height adjustment, and an automatic turning system for efficient one-man operation. If you are looking to get high-quality milling capabilities, consider the Weinig Unicontrol 10-5 machine we have for sale. Contact us for more information. • Capacities • Working width: 40–220 mm • Working height (longitudinal machining): 40–100 mm • Working height (cross machining): 40–100 mm (counter wood height 80 mm) • Workpiece length (longitudinal): min. 220 mm + 2 x tenon length • Workpiece length (cross): min. 275 mm + 1 x tenon length with 320 mm tool diameter • Feed (cross machining) • Motor power: 0.3 kW • Feed speed: 3–25 m/min • Workpiece clamping: 2 clamping claws • Length stop: with scale and reading magnifier for frame or sash outer dimensions Rjdjx S Sk Ejpfx Ahzsbt • Counter: pneumatically clocked, 4 positions (not for studio windows), up to wood height max. 80 mm • Double part package: single or double part feeding, with cross separation and retention system • 1st piece (lying on the stop) wood width: 55–90 mm • 2nd piece wood width: 130 mm • Feed (longitudinal machining) • Motor power: 2.2 kW • Feed speed: 4–18 m/min (infinitely variable via frequency converter) • Feed roller spacing: 100/120 mm • Feed roller width: 30/50 mm • Feed roller diameter: 95 mm • Machining units • Crosscut saw • Motor power: 3 kW • Spindle diameter: 40 mm • Spindle speed: 2800 rpm • Tool swing: max. 400 mm • Axial adjustment: pneumatic against 4-fold turret • 1st spindle with tenon and slot • Motor power: 11 kW • Spindle diameter: 50 mm • Spindle speed: 3250 rpm • Tool swing: max. 320 mm • Tool clamping length: 320 mm • Axial adjustment range: 240 mm • Number of tools: 4 x 80 mm • Axial adjustment: hydraulic • 1st profiling spindle • Motor power: 11 kW • Spindle diameter: 50 mm • Spindle speed: 6000 rpm • Tool diameter: max. 232 mm • Tool zero swing circle: 130–140 mm • Tool clamping length: 320 mm • Axial/radial adjustment range: 240/80 mm • Number of tool positions: 4 x 80 mm • Axial adjustment: hydraulic • 2nd profiling spindle • Motor power: 11 kW • Spindle diameter: 50 mm • Spindle speed: 6000 rpm • Tool diameter: max. 232 mm • Tool zero circle: 130–140 mm • Tool clamping length: 320 mm • Axial/radial adjustment range: 240/80 mm • Number of tool positions: 4 x 80 mm • Axial adjustment: hydraulic • Mechanical spindle brakes • For profiling spindle(s) • For crosscut saw and profiling/sawing units • Profile milling unit (horizontal, top; in front of last profiling spindle) • Radially indexed: 2 positions • Axially indexed: 2 positions • Motor power: 3 kW • Spindle diameter: 40 mm • Spindle speed: 5850 rpm • Tool swing: 130 mm • Tool clamping length: 40 mm • Axial adjustment range: 52 mm • Radial adjustment range: 125 mm • Profile milling unit (vertical, right; at end of machine) • Radially indexed: 2 positions • Axially indexed: 2 positions • Motor power: 3 kW • Spindle diameter: 40 mm • Spindle speed: 5850 rpm • Tool swing: 210 mm • Tool clamping length: 160 mm • Axial adjustment range: 90 mm • Radial adjustment range: 100 mm • Length tenoning and slotting spindle (640 mm tool clamping length, instead of 320 mm spindle) • Motor power: 15 kW • Spindle speed: 2925 rpm • Number of tool positions: 8 x 80 mm