Steel chain hoist type Electus A2

Stahl Typ Elektus A2

Condition: ready for operation (used), Year of construction: 2023, Load capacity: 1450/1125kg, load center: 600mm, lift height: 3200/4900mm, battery weight: 300-350kg, free lift: 900mm, mast height lowered: 2100mm, mast height extended: 4900mm, reach: 590mm, ground clearance under mast: 80mm, ground clearance at axle center: 50mm, track width: 1292mm, frame cross-section: 1058mm, front overhang: 655mm, wheelbase: 1120mm, rear overhang: 175mm, side shift: 80mm left / 80mm right, lost load thickness: 880mm, fork tilt back: 3°, fork tilt forward: 3°, min. turning radius: 1350mm, support arm height: 282mm, support arm length: 530mm, maximum speed: 6km/h, gradeability: 5%, battery capacity: 24V/270Ah, fork dimensions: 35x100x1070mm, front wheels (polyurethane): OD 200mm / width 50mm, rear wheel (solid rubber): outer diameter 250mm / width 75mm, AC drive motor: 24V / 2.5kW, AC pump motor: 24V / 5kW, rated power: 2.5kW, width: 1512mm, length: 1950mm, net weight without / with battery: 2800/3150kg, operating hours: 86h. An on-site inspection is possible. Rodpew S Tyaofx Ahcecf

Condition: used, functionality: fully functional, lifting height: 6,000 mm, main lifting speed: 5,000 mm/min, in great condition, incl. load collective accumulator with high reserve, incl. hook block, electrics 400/230/24V, incl. central electrics for crane travel etc.! !Advantage no CAN bus control! Rcedpfoq R N Tqsx Ahcef also available as Craneset

Condition: excellent (used), Four-side planer Weinig Hydromat 23C Working width: 230 mm Working height: 160 mm Number of spindles: 7 Spindle arrangement: 1. Bottom 15 kW 2. Right 7.5 kW 3. Left 7.5 kW 4. Top 15 kW 5. Bottom 30 kW (multi-blade saw) 6. Bottom 7.5 kW (hydro support) 7. Top 7.5 kW (hydro support) Spindle speed: 6000 rpm Spindle diameter: 50 mm 4 feed rollers in the worktable Rcedpfx Asxlcufshcsf Feed speed adjustable via frequency inverter up to 36 m/min Feed drive powered by cardan shaft Pneumatic pressure elements Technical documentation

Condition: used, Year of construction: 1977, Wurster and Dietz GDZ 600 GES Year of construction 1977 Passage: 71 cm stroke: 600 mm with swing frame with water-cooled guides with hydraulic saw clamp Jansen Rodjqpdi Ujpfx Ahcecf with riving knife with saw blades with templates with fence immediately available Location: Austria, near Klagenfurt

Year of construction: 1990, condition: reconditioned (used), 4-sided planer unimat U23, 7 heads Rjdpfepqxnxex Ahcscf 4-sided Weinig 7-head planer, 7 universal arrangement: horizontal, lower vertical, right, left, vertical, right, vertical, upper horizontal, lower horizontal, and the last universal. The drive is realized by means of cardans. The drive is secured with Rotax clutches. Pressure of the element using pneumatics. Feed smoothly regulated by an inverter. Machine feed 0-42 m/min. 2.5 kW and 7.5 kW engines. Grinding table and a new one. Additionally, new wiring and new electrics. The machine has been completely renovated. Warranty .

Condition: used, Year of construction: 2015, through-put width 580 mm working heigth 580 mm air consumption 400 - 800 l/min working pressure 3,4 - 8,0 bar suction capacity 17,4 m³/h total power requirement 1,2 kW weight of the machine ca. 115 kg dimensions of the machine ca. 1225 x 935 x 1640 mm Description - Suitable for various blasting materials, e.g., quartz, glass beads, plastic beads, etc. - Ideal for cleaning, derusting, or paint removal from all types of metal parts , e.g., engine parts, fittings, signs, housings, rims, hinges Rcodpfx Aow Rrcwjhcsf - High-quality latex work gloves are firmly attached to the housing - Optimal visibility and occupational safety during workpiece processing thanks to the viewing window with adhesive protective film - Dust-free working thanks to circumferential seals on the lid and door frame - Sturdy storage grid allows workpieces to be placed inside the cabin - With drain opening for changing the blasting material - Suction pipe for the blasting material attached to the bottom of the collection container - With compressed air connection on the outside - Glass bead blasting material, corundum blasting material, silicon carbide, plastic blasting material, etc. can be used Equipment details: - Very large front flap opening upwards with gas pressure springs for quick and easy loading and unloading - Integrated extraction system with replaceable air filter - Blasting gun without finger trigger – air flow controlled via foot pedal - Two fluorescent tubes (230 volts) in separate housing with protective screen and replaceable protective film, including five replacement films - Light switch with dual function: extraction and cabin lighting are switched on and off simultaneously - Working pressure regulated via pressure regulator with pressure gauge

Condition: good (used), functionality: fully functional, operating hours: 90 h, power: 29.42 kW (40.00 HP), motor manufacturer: Lombardini, overall weight: 2,100 kg, Goldoni Euro 45SN articulated tractor with only 90 working hours on the clock. The rotary tiller is available as an option; it is lightly used but in excellent condition. Brand: Goldoni Model: Euro 45SN Drive: Diesel, 4-cylinder Weight: 2100 kg Operating hours: 90 hours Engine: Lombardini 40 hp Price without tiller: €23,500 Rcsdpfx Ahey Sad Tecjf Price with tiller: €26,000

Condition: used, Electric Motor AC Motoren GmbH Type AOM 225S-4 400/690V 50Hz 37 kW 1475 RPM 440 60Hz 44,4 kW 1770 RPM 228A Rjdpfx Ahodcb U Tocscf IP55

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, load capacity: 1,000 kg, lifting height: 5,000 mm, Electric chain hoist DEMAG DKUN10-1000 K V1 Load capacity 1000 kg, 2/1 Hook travel 5 m Year of manufacture 2006 Without control unit, otherwise complete Very good condition Various electric chain hoists in stock Good condition Redpfx Ajv Uvn Iehcecf Info: 20,000 DEMAG spare parts and components in stock! Demag parts warehouse

Condition: used, Cable winch, hoist winch, construction winch -Mechanical winch: with planetary gear without drive -hydraulic brake -Traction force: approx. 20,000 kg -Drum: Ø 500 mm -Rope diameter: 24 mm -Rope to be wound length: 2x 28 m -Number: 2x winches available -Price: per piece Rcedpfeclnknjx Ahcsf -Dimensions: 1640/700/H700 mm -Weight: 1026 kg/piece