Demag Column swing crane Chain Hoist

Demag KBK Kran Drehkran Hallenkran L 4m Demag KBK1 125Kg + DC Kettenzug H3,15m

Condition: excellent (used), Year of construction: 2008, Gravicolor 30 GC 30-M-O-Z Manufacturer: Motan Year of production: 2008 A gravimetric dosing and mixing unit designed for direct mounting on the inlet flange of a plastics processing machine. The device allows dosing and mixing of up to 4 granulated components. The actual, measured and weighed quantities are constantly compared with the set values using a modern microprocessor-based control system, which guarantees very high recipe accuracy (+/- 0.1%) thanks to continuous self-optimization. The complete unit includes: Lrsdpewm Ii Tjfx Apvjl 2 feed tanks for primary material or regranulate/primary material 2 feed tanks for masterbatches or additives 2 pneumatically controlled conical dosing heads 2 precision dosing screws with motor drive Material tanks – capacity approx. 7 litres Weighing tank – capacity approx. 0.8 litres Mixing tank – capacity approx. 3.0 litres Manually operated gate valve GRAVInet controller with colour touch panel for recipe, milled material and process data management, vibration compensation and continuous self-optimisation; built-in Ethernet port and standard reporting/printing functions Technical data: Average capacity: 60 kg/h Main component dosing range: 1–100% Additive dosing range: 0.5–10% Power supply: 1/N/PE 230 V 50 Hz Power consumption: 100 W Compressed air: 6–8 bar, without oil and water Weight: approx. 60 kg ✅ The set includes Piovan material feeders - visible in the photos.

Condition: good (used), Year of construction: 2004, Peripheral devices MArke: Tool - Temp Type : TT - 157E Ljdpfx Aoh Hbpwopvjrl Available 14x pieces

Year of construction: 2003, condition: ready for operation (used), Closing force: 500kN, heating output: 4.9kW, connected load: 19.9kW, operational hours counter: 57,024h, with handling and conveyor belts, without dosing device. Ljdpfemrri Djx Apverl

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, machine/vehicle number: AGH633, Technical data: 1 ABUS LS column slewing crane, rated load 1000 kg Ledpfsxdvk Rjx Apvjrl Capacity at full outreach: 1000 kg / 1 t Height: approx. 3.4 m Underside of jib: approx. 2.55 m Outreach: approx. 4.5 m Hook height: approx. 2.15 m Total weight approx. 1000 kg incl. anchor plate, diameter 110 cm Incl. Abus GM chain hoist 1000 kg Slewing range 270°, connection 400V 16A Crane is dismantled and immediately available Item location: 75053 Gondelsheim Further cranes available, capacity from 80–5000 kg, please inquire See pictures Shipping by freight forwarding or collection by appointment only

Condition: good (used), Year of construction: 1991, Singer devices Motan Year from 1991 Available 6x STK Ledpfx Aoidvx Topvorl

Condition: new, Year of construction: 2025, TEMP 90 W9 SSR General information: maximum 90 ° C water temperature range -robustes steel sheet housing device on wheels Hydraulic: Lrsdpfx Aed Aaruspvel Immersion pump (make Bacon) with pressure / vacuum function (leak stop operation) -Qmax. 60 l / min Pmax. 3.8 bar Tank and heater made of stainless steel Heating power 9 kW tank capacity 12 liters Fittings made of brass/stainless steel-automatic water filling -electrical level indicator -indirektes cooling system (plate heat exchanger) Cooling capacity ~ 40,000 kcal / h (10 sheets) Display gauge -integrated bypass Solenoid valves for cooling and recovery Electrical and control: -Electronic, self-optimizing PCB control Control voltage in the unit 24 V AC -Akustische and visual alarm indicator -Solid state relays Safety thermostat Sensor break monitoring Monitoring of tube breakage and leakage Connection cable with plug -Dimensions: 295 x 575 x h495 mm -Weight: 40 kg

Condition: used, Year of construction: 1981, arm length 3600 mm total column height ca 5500 mm weight max. in kg 1000 kg travel of hook 3000 mm height of hook ca. 4000 mm weight of the machine ca. 1,5 t dimensions of the machine ca. 6,0 x 2,0 x 1,0 m Pillar Type Swivelling Crane - Electric chain hoist 1 SN Speed: 4.6 / 1.2 m/min Lrodpextqwqjfx Apvjl - with trolley System is dismantled.

Condition: excellent (used), 1.0 pcs. dosing unit (two components can be dosed) Lsdsxqzkpopfx Apverl Manufacturer: MOVACOLOR Type: The Balance There are 3.0 pcs. dosing units available.

Condition: good (used), Year of construction: 2007, functionality: fully functional, clamping force: 800 kN, For sale is an injection molding machine from the manufacturer Arburg, model 370 C 800-100. Unfortunately, the injection unit is no longer available. Overall, the machine is in good condition. Technical Data: Year of manufacture: 2007 Clamping force: 800 kN Tie bar spacing: 370 x 370 mm Max. daylight: 750 mm Mold installation height: 250 mm Injection unit: 100 (not included) Transport and loading can be organized Europe-wide upon request for an additional charge. Prices include VAT. Inspection by appointment possible. Please contact us – our team will be happy to assist you. Trade-in or exchange possible! Lrodpfx Apex U Dnusvsl Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION AND METALWORKING MACHINES, ETC. Are you looking for a high-quality yet affordable metalworking machine for your production line? Or would you like to sell your own? For more information or contact options, please visit our website.

Condition: used, load capacity: 4,000 kg, FOR SALE: Console/Jib Crane – 2 t + 2 t, 8 m Span, 5.3 m Height For sale: Console/jib crane suitable for industrial lifting and material handling. Ledpoya H Exsfx Apvsrl Specifications Lifting capacity: 2 tons + 2 tons (two hoists) Span / outreach: 8.0 m Height: 5.3 m Description Practical crane solution for workshop or production use where controlled lifting with two hoists is required. Suitable for handling parts, tools, and assemblies. Location: Finland (to be confirmed) Delivery/loading: Can be arranged by agreement.