Milling machining centers - universal

DECKEL-MAHO DMU 100 T

Condition: repair required (used), Year of construction: 2002, operating hours: 54,981 h, functionality: not functional, machine/vehicle number: 1114 000273 3, travel distance X-axis: 1,080 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, controller manufacturer: Haidenhain, controller model: HEIDENHAIN TNC 530, total height: 2,500 mm, total length: 6,200 mm, total width: 3,802 mm, table width: 795 mm, table length: 1,500 mm, table load: 900 kg, overall weight: 9,500 kg, operating hours of spindle: 14,170 h, spindle nose: SK40, number of slots in tool magazine: 32, tool weight: 8,000 g, Equipment: chip conveyor, documentation/manual, Technical Details Machine: DMG DMU 100T Year of manufacture: 2002 Control: HEIDENHAIN TNC 530 Spindle taper: SK40 Operating hours: 54,981 h Kdsdpfx Ajxxamxjg Aow Travel paths: X-axis: 1,080 mm Y-axis: 710 mm Z-axis: 710 mm Weight: approx. 9,500 kg Additional equipment: - NC rotary table (Nikken) - Large NC rotary table - Tailstock - Electronic handwheel Inspection Viewing under power is possible by prior appointment at any time. Condition: Used condition appropriate to age and previous usage. Known defects: - Ball screw of the X-axis worn / overhaul required - Y-axis likely cable or motor defect Repairs carried out: 2017 – Retrofit kit for handwheel 2022 – Replacement of screw conveyor in chip conveyor 2024 – New cylinder/linear guide for tool magazine 2024 – New monitor Further defects cannot be ruled out. Important note / disclaimer The machine is expressly sold as defective, without warranty, without guarantee, and with the exclusion of any liability for material defects. All technical details have been provided to the best of our knowledge, but are not binding. No responsibility is taken for completeness, accuracy, or timeliness of the information. The sale is made as seen and excluding any subsequent negotiation.

Condition: excellent (used), Year of construction: 2016, operating hours: 26,678 h, functionality: fully functional, This machine is available exclusively through Montrasio GmbH and is being sold on behalf of the authorized parties. DMG DMU 100P duoBLOCK – 5-Axis CNC Machining Centre (2016) Year of manufacture: 2016 Control: SIEMENS CELOS Travel / Capacities X-axis: 1,000 mm Y-axis: 1,250 mm Z-axis: 1,000 mm Workpiece diameter: 1,100 mm Workpiece height: 1,600 mm Workpiece weight: up to 2,200 kg Table / Axes Table size: 1,100 × 900 mm Table rotation speed: 35 rpm Max. table load: 2,223 kg B-axis universal milling head swiveling range: −30° to +180° Spindle / Tool Spindle speed: 0 – 12,000 rpm Spindle motor power: approx. 69 HP (≈ 51.5 kW) Spindle taper: HSK-A100 Tool magazine: 63 positions Machine Dimensions Footprint: approx. 24 m² Machine height: approx. 3,606 mm Machine weight: approx. 24,540 kg Accessories / Equipment CNC-controlled universal milling head (B-axis) Workpiece probe Tool measurement system Kdjdpfx Agoxl Arko Asw 3D Quickset Chip conveyor

Condition: ready for operation (used), Year of construction: 2002, Technical details: X travel: 1,250 mm Y travel: 710 mm Z travel: 710 mm Table area: 1,500 x 800 mm Table load: 800 kg Spindle speed: 12,000 rpm Spindle motor: 15 / 10 kW Control: iTNC HEIDENHAIN Spindle taper: SK 40 Tool changer: 40 positions Power consumption: 44 kVA Machine weight approx.: 10 t Space requirements approx.: 3.5 x 2.65 x 2.65 m 5-axis simultaneous machining center, B-axis (-120° / +30°), NC rotary table integrated in rigid table, direct measuring system, 3D probe Through-spindle coolant 20 bar, 600 l, Ksdpfx Agjxq S Ncs Aedw Rinsing gun, Chip conveyor, Approx. 44,973 operating hours / 20,542 spindle hours

Year of construction: 2000, condition: excellent (used), I have for sale a Deckel Maho DMU 100T machining center Control: Heidenhain MillPlus Technical condition of the machine - Very good Year of production: 2000 Country of Manufacture: Germany Machine parameters: Axis travel "X" :1080mm "Y" axis travel: 710mm "Z" axis travel 710mm Torsion head Kodpfx Agelffzco Ajdw Maximum spindle speed 12,000 rpm. Tool storage: 32pcs(2x16 tools) High-pressure cooling Spindle cooling Heidenhain measuring scales on all axes Chip conveyor central lubrication hydraulic tool clamping Spindle taper SK40 Full programming manual Documentation Machine weight 10t. Included in the price loading Stal-Com company for 17 years we are engaged in sales, service and training on CNC machines from DMG group. We specialize in all models of Gildemeister lathes and Deckel Maho Machining Centers. All machines undergo a meticulous technical inspection. In addition to customers from Poland, our machines are also purchased by customers from all over Europe and parts of Asia. Each machine can be checked during production as we also do machining. After purchasing a machine from our company, we provide training for the crew as well as we can set up the production of details at the customer's site. We cooperate with many companies on a permanent basis to which we provide further machine tools. Stal-Com Rafał Dziendziel

Condition: used, Year of construction: 1995, max. wheel diameter 80 mm gear width 120 mm max. module 3 min. module 1 control SIEMENS 840 C total power requirement 30 kW weight of the machine ca. 7500 t dimensions of the machine ca. m L I E B H E R R CNC – Controlled Gear Hobbing Machine Type LC 82 Baujahr 1995 Ser.-Nr. 0836 _____ Gear-Diam. max. 80 mm Module Range 1 - 3 Helix Angle +/- 45 ° Distance Table Center to Tool Center 15 – 160 mm Hobbing Head Slide stroke vertical 250 mm Tangential Travel / Shift Travel of Tool slide 180 mm Minimum Number of Teeth 3 (!) Hob Size max. Ø x length approx. 90 - 200 mm Taper of Hob spindle HSK 50 A Workpiece Clamping length (table/Tailstock) 250 mm Infeed rates axial/radial/tangential/ 20/4/5/ mm/WP rev. Hob speed steplessly adjustable 0 – 800 rpm Ksdpfst Hw R Dsx Ag Asdw Hob Spindle Drive 8 kW - Total Load approx. 30 kW - 400 V – 50 Hz Total weight of Machine approx. 7.500 kg Special attachments / accessories: • SIEMENS - CNC-Control Model 840 C for 6 axis (i.e. Hob drive/table drive/ swivel angle of hob head/ Radial axis/Axial Axis/ Tangential Axis ) with a surface especially designed for the gear manufacturing with error display function. • Automatic and contactless tooth meshing device to adjust the hob into workpiece. • Automatic Shifting of hob slide. • Automatic Workpiece handling system Model SSL for high speed loading and unloading of Workpieces, consisting of a steel chain3,, for workpiece carriers and 3-fold WP-Gripper for blanks, for the machining position and for unloading of finished parts onto the steel band. Actual Workpiece size to be machined: approx.. Ø 30 x 120 mm length, helix gear sprocket. Clamping of workpiece between centers by a mechanical, cam controlled quill in tailstock. • complete workarea protection with one sliding door, chip conveyor, small coolant device, oil dust Absorber, WP Carrier, etc. The Machine can be also used for dry cutting. Condition : Satisfactory to Good . Machine can be inspected under power here in stock. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: used, Year of construction: 2006, CNC Heidenhain TNC530 Kdodpjwutxisfx Ag Ajw X/Y/Z 1,500/800/1,000 mm Swivel axis 0-180° A-axis C-axis B-axis Max. workpiece weight 1,500 kg Machine weight 18,000 kg

Condition: new, Year of construction: 2025, combustion chamber power: 175 kW Working power: 140 kW Diameter smoke outlet: 200 mm Hot air delivery pipes: 1 x 500mm Firebox length: 950 mm Firing chamber width: 600 mm Firebox height: 860 mm Air delivery : 8900 m³/h Power consumption : 3500 W designed for room volume : 3000 m³ area to be heated: 500/600 m² furnace height without hot air conveying pipes: 2200 mm Furnace width: 930 mm Kjdpfx Agsi Hplrs Aedw Furnace length without flue gas fan: 1700 mm Weight: 615 kg

Condition: ready for operation (used), Year of construction: 2017, General Data Measurements width 3000 mm Measurements depth 2300 mm Measurements height 2700 mm Machine weight 9600 kg Control Unit Brand HEIDENHAIN Model TNC 640 Main Drive Number of spindles 1 Spindle speed range 20000 rpm Tool taper SK40 Number of axis 5 Movement X-Axis Movement 600 mm Y-Axis Movement 500 mm Z-Axis Movement 500 mm Media Chip conveyor Yes Additional Equipment Chip conveyor, coolant system, tool chain magazine, internal coolant supply, extended chip flushing, rotating viewing window, mist separator, blast air, optical measuring probe, tool breakage control, flushing gun, 3D control, NC swivel rotary table, preparation for handling system, signal light, electronic handwheel, screen display. Kjdpfx Agow S N Ige Aedw Optional accessories for sale: 48x aluminum clamping plates (own construction); 48x vices HSG5 from Ceratizit (WNT), 5x shelves (own construction), tools and holders This 5-axis DMG MORI DMU 60 EVO was manufactured in 2016. It features a Heidenhain iTNC 640 control, a spindle speed of 20000 rpm and 120-fold tool change. The machine includes a chip conveyor, coolant system, and an internal coolant supply of 40 bar. Ideal for complex machining tasks, the DMU 60 EVO represents a robust addition to any workshop. For more information about this vertical machining centre, please reach out to us. Application Types Milling

Condition: good (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 700 mm, - milling head/spindle retrofit in the year 2022 for 28.000 Euro - CNC control Heidenhain iTNC530 - NC swivable milling head: B-axis full NC-axis A-axis horizontal/vertical - NC-rotary table (C-axis) - tool changer for 72 tools Kdjdsrz I Hbjpfx Ag Asw - chip conveyor - electronical hand wheel - coolant device (coolant through spindle device 20bar) Technische Daten / technical details: Verfahrweg X längs / X-Travel longitudinal 1200 mm Verfahrweg Y quer / Y-Travel cross 600 mm Verfahrweg Z vertikal / Z-Travel vertical 700 mm C-Achse Rundtisch / C-axis rotary table 360 ° B-Achse / B-axis +-90 ° Rundtischgröße / rotary table size 800 mm Werkzeugschaft / spindle taper SK40 Drehzahlbereich / spindle speed 0-6300 UpM /rpm Anzahl der Werkzeugplätze / tool places in ATC 72 fach Antriebsleistung Spindel 100/40%ED / drive capacity spindle 100/40%ED 17/25 kW Gewicht der Maschine ca. / weight 9000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: excellent (used), Year of construction: 2020, operating hours: 4,800 h, functionality: fully functional, machine/vehicle number: NL154200702, Manufacturing origin: JP Voltage: 380 V / 50 Hz / 3-phase Net weight: 5,400 kg Customs tariff number: 8458.9100 TECHNICAL DATA Maximum turning diameter: 350 mm Turning length: 515 mm CNC control: M730UM MAPPS Celos Swing over bed: 923.8 mm Swing diameter above carriage: 755 mm Standard turning diameter: 260 mm Bar capacity: 34 mm Main spindle: Spindle speed range: 100 – 8,000 rpm Spindle motor power: 11 / 7.5 kW C-axis resolution: 0.001° Chuck diameter: 210 mm Subspindle: Maximum speed: 8,000 rpm Spindle nose: A2-5 Axis travels: X-axis travel: 260 mm Z-axis travel: 580 mm Y-axis travel: 100 mm (±50 mm) Turret: Number of turret stations: 20 Driven stations: 20 Tool shank diameter: 25 mm Maximum driven tool speed: 10,000 rpm Ksdpjw T Sn Eefx Ag Ajdw Driven tool motor power: 5.5 / 3.7 kW Feed rates: Rapid traverse X-axis: 30 m/min Rapid traverse Z-axis: 30 m/min Rapid traverse subspindle: 30 m/min Rapid traverse Y-axis: 10 m/min Rapid traverse C-axis: 400 rpm Total power requirement: 31 kVA Approximate machine weight: 5.4 t Approximate machine dimensions: 4.0 x 3.0 x 3.2 m Errors and omissions excepted – data provided without obligation.