5 Axis machining center

Deckel Maho DMU 100 T

Condition: repair required (used), Year of construction: 2002, operating hours: 54,981 h, functionality: not functional, machine/vehicle number: 1114 000273 3, travel distance X-axis: 1,080 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, controller manufacturer: Haidenhain, controller model: HEIDENHAIN TNC 530, total height: 2,500 mm, total length: 6,200 mm, total width: 3,802 mm, table width: 795 mm, table length: 1,500 mm, table load: 900 kg, overall weight: 9,500 kg, operating hours of spindle: 14,170 h, spindle nose: SK40, number of slots in tool magazine: 32, tool weight: 8,000 g, Equipment: chip conveyor, documentation/manual, Technical Details Machine: DMG DMU 100T Year of manufacture: 2002 Control: HEIDENHAIN TNC 530 Spindle taper: SK40 Operating hours: 54,981 h Travel paths: X-axis: 1,080 mm Y-axis: 710 mm Z-axis: 710 mm Weight: approx. 9,500 kg Additional equipment: - NC rotary table (Nikken) - Large NC rotary table - Tailstock - Electronic handwheel Inspection Viewing under power is possible by prior appointment at any time. Condition: Used condition appropriate to age and previous usage. Known defects: - Ball screw of the X-axis worn / overhaul required - Y-axis likely cable or motor defect Repairs carried out: 2017 – Retrofit kit for handwheel 2022 – Replacement of screw conveyor in chip conveyor 2024 – New cylinder/linear guide for tool magazine 2024 – New monitor Further defects cannot be ruled out. Important note / disclaimer Cajdpfx Aexxamxob Toa The machine is expressly sold as defective, without warranty, without guarantee, and with the exclusion of any liability for material defects. All technical details have been provided to the best of our knowledge, but are not binding. No responsibility is taken for completeness, accuracy, or timeliness of the information. The sale is made as seen and excluding any subsequent negotiation.

Condition: used, Year of construction: 2000, Technical details: x-travel: 500 mm y-travel: 400 mm z-travel: 400 mm b-axis: manuell positionierbar ° c-axis: manuell positionierbar control: Heidenhain TNC 124 tool changer with: nein Plätze spindle taper MT: SK40 Revolution per minute: 4500 U/min. feed speeds infinitely variable: X/Y/Z: max. 14000 mm/min Cajdpfx Aeu Idffsb Toa rapid traverse:: 5,0 m/min table-size: 700 x 500 mm total power requirement: 17 kVA Weight approx.: 2,91 t dimension machine xH: 2,0 x 2,0 x 2,5 m CNC universal vertical milling machine The machine has 5 axes. B- and C-axis manual with measuring system. B-axis table swivel -10° / +95° and C-axis table rotate 360° (not interpolatable, manually selectable via control). Cooling device (without pump) Operation via swiveling boom *

Condition: ready for operation (used), Year of construction: 2002, Technical details: X travel: 1,250 mm Y travel: 710 mm Z travel: 710 mm Table area: 1,500 x 800 mm Table load: 800 kg Spindle speed: 12,000 rpm Spindle motor: 15 / 10 kW Control: iTNC HEIDENHAIN Spindle taper: SK 40 Cajdexq S Ncspfx Ab Tea Tool changer: 40 positions Power consumption: 44 kVA Machine weight approx.: 10 t Space requirements approx.: 3.5 x 2.65 x 2.65 m 5-axis simultaneous machining center, B-axis (-120° / +30°), NC rotary table integrated in rigid table, direct measuring system, 3D probe Through-spindle coolant 20 bar, 600 l, Rinsing gun, Chip conveyor, Approx. 44,973 operating hours / 20,542 spindle hours

Year of construction: 2000, condition: excellent (used), I have for sale a Deckel Maho DMU 100T machining center Control: Heidenhain MillPlus Technical condition of the machine - Very good Year of production: 2000 Country of Manufacture: Germany Machine parameters: Axis travel "X" :1080mm "Y" axis travel: 710mm "Z" axis travel 710mm Torsion head Maximum spindle speed 12,000 rpm. Tool storage: 32pcs(2x16 tools) High-pressure cooling Spindle cooling Heidenhain measuring scales on all axes Chip conveyor central lubrication hydraulic tool clamping Spindle taper SK40 Full programming manual Documentation Machine weight 10t. Cajdpfx Aslffzcjb Tea Included in the price loading Stal-Com company for 17 years we are engaged in sales, service and training on CNC machines from DMG group. We specialize in all models of Gildemeister lathes and Deckel Maho Machining Centers. All machines undergo a meticulous technical inspection. In addition to customers from Poland, our machines are also purchased by customers from all over Europe and parts of Asia. Each machine can be checked during production as we also do machining. After purchasing a machine from our company, we provide training for the crew as well as we can set up the production of details at the customer's site. We cooperate with many companies on a permanent basis to which we provide further machine tools. Stal-Com Rafał Dziendziel

Condition: ready for operation (used), Year of construction: 2011, Two CNC milling machines DMG are available. 1) Deckel Maho DMU 100 monoBlock, year of manufacture: 2011, travel X/Y/Z: 1150mm/710mm/710mm, tool positions: 32, rapid traverse: 30m/min, tool holder: SK40, speed: 18000rpm. Machine dimensions X/Y/Z: approx. 4250mm/3500mm/3300mm, weight: approx. 10000kg, control: Heidenhain iTNC 530, operating hours: 30521h, spindle hours: 15388h. 2) Deckel Maho DMU 60 monoBlock, year of manufacture: 2006, travel X/Y/Z: 730mm/560mm/560mm, tool positions: 24, rapid traverse: 30m/min, tool holder: SK40. Machine dimensions X/Y/Z: approx. 2900mm/1900mm/2250mm, weight: approx. 7000kg, control: Heidenhain iTNC 530, operating hours: 39296h, spindle hours: 15305h. Documentation available. An on-site inspection is possible. Only package sale possible. Caedpfxjxtpqvo Ab Tsa

Condition: good (used), Year of construction: 2008, grinding length: 1,250 mm, table length: 1,250 mm, table load: 1,200 kg, table width: 500 mm, spindle speed (max.): 2,600 rpm, spindle speed (min.): 1,000 rpm, overall weight: 9,300 kg, travel distance X-axis: 1,400 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, power: 185 kW (251.53 HP), input voltage: 400 V, space requirement height: 2,870 mm, Equipment: rotational speed infinitely variable, X-axis: grinding length 1,250 mm, travel 1,400 mm Y-axis: distance from table to spindle center 700 mm, travel 600 mm Cajdpfx Aeu Hiq Rjb Tsa Z-axis: grinding width see note, travel 600 mm Note: The grinding area in the transverse direction (Z-axis) depends on the travel path and the grinding wheel width. Example: Travel path across = 600 mm Grinding wheel width 60 mm = grinding width 660 mm Grinding wheel width 100 mm = grinding width 700 mm See pictures for more technical data

Year of construction: 2014, condition: ready for operation (used), A defective CNC precision surface and profile grinding machine ABA is available. Grinding length: 2500mm, grinding width: 1020mm, cross travel: 920mm, cross feed intermittent: 750mm/pulse, cross feed continuous: 5000mm/min, table spindle center distance: 1100mm, magnetic plate dimensions X/Y: 2500mm/1000mm, max. table load: 5000kg, table speed: 60m/min, spindle power: 26kW, grinding wheel dimensions X/Y/Z: 500mm/100mm/203mm, grinding wheel rotation speed: 35m/s. Machine dimensions X/Y/Z: approx. 8000mm/4000mm/3150mm, weight: approx. 20000kg, control: Siemens Sinumerik 840 D-Solutionline, operating hours: approx. 1000h, cycle time: approx. 400h. Including cooling unit Hyfra sigma 13-S, year of manufacture: 2014. The linear drive of the X-axis is defective and has been dismantled. Documentation available. On-site inspection is possible. Codpjwi Tpkjfx Ab Teaa

Condition: used, Year of construction: 1998, grinding length 800 mm grinding width 500 mm workpiece height 425 mm total power requirement 15 kW weight of the machine ca. 4,5 t Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical : GEIBEL & HOTZ CNC Cycle Controlled Precision Surface Grinding Machine model FS 850 GT SL year 1998 Serial no 1012580698 _____ Grinding length max. (table movement 900 mm) 800 mm Grinding width max. (cross movement 500 mm) 500 mm Mounting height under new grinding wheel 425 mm size of magnetic plate 800 x 500 mm Max. table load 1.100 kg Table speed 2 – 28 m/min Caedpfst Hxamox Ab Tsa Cross feed intermittend 3 – 60 mm/stroke Cross-/Vertical quick feed 4.000 mm/min Grinding wheel measurements 400 x 100 x 127 mm Grinding spindle-drive approx. 9 kW Total electrical load approx. 22 kW - 400 V - 50 Hz Weight approx. 4.500 kg Accessories / Special Features: • Dialog-guided GEIBEL & HOTZ automatic CNC cycle control model SL for 3 axes. Graphically supported data input in absolute dimensions or via teach-in procedures for preprogrammed grinding and dressing cycles. SIEMENS LCD display with softkeys for setting all parameters and easy monitoring axis movements and work progress. • Electronic handwheel for 3 axes X, Y, and Z, feed rate switchable from 0.01 / 0.1 / 1 mm/rev. • table movement is effected by a rolling ring thread drive (GT), which allows both very high and very low table speeds with constant torque and very high efficiency. • cross and vertical movements are effected by a ball screw drive with incremental glass scale. • Single-point diamond dresser mounted on the table for aut. dressing cycle and aut. compensation • MPM automatic grinding wheel balancing device. • Mounted electromagnet plate 800 x 500 mm with adjustable holding force • Wet grinding facility with universal fleece belt filtration unit • Complete enclosure of the working area with electronically safeguarded sliding doors • sep. switch cabinet, sep. mobile control panel, various accessories, manuals , etc. Condition : very good, with the wide grinding wheel for large surface grinding ! Please click here to view soon a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, after conclusion of contract, before loading We do always have a large selection of Grinding machines in stock – please let us know your requirements !

Condition: ready for operation (used), Number of tool slots: 25, max. rotational speed: 6300/min, tool cone: SK40 with DIN 7388 tightening pin, connected load: 35kVA, controls: Deckel Maho MillPlus, operational/ spindle hours: 56,344/ 14,965h, with chip conveyor and 600l coolant tank, without tools and clamping devices. Cajdpfjlbmtnex Ab Tsa

Condition: good (used), Year of construction: 2005, travel distance X-axis: 780 mm, travel distance Y-axis: 560 mm, controller manufacturer: Heidenhain, controller model: Mill Plus, table length: 700 mm, spindle speed (max.): 12,000 rpm, 60 tool places. 2-fold pallet change. IKZ spindle with 12000 rpm, 40 bar Operating mode 4 for working with open door. Blum laser, with tool measurement and tool breakage control. Preparation for Blum 3D probe. Probe is not included in the scope of delivery. Csdpfxju S A Ano Ab Teaa