Universal Machining Centre

DECKEL MAHO DMC 70 Evo

Condition: good (used), Year of construction: 2007, Equipment: chip conveyor, Technical Data DECKEL MAHO Seebach GmbH 4 Technical Data 4.1 Main Drive 18,000 rpm AC servomotor motor spindle Torque available at the spindle, considering efficiency – see diagram Motor power at 100% duty cycle – see diagram Motor power at 40% duty cycle – see diagram Spindle speed infinitely programmable: 20 to 18,000 rpm Setup mode speed: 20 to 800 rpm Performance diagram 02.273697 18,000 rpm star-delta connection Torque Nm Power kW Pgodpox N H T Nsfx Ah Heg 4.3 Feed Drive AC servomotors for X, Y, Z axes Feed rate X/Y/Z infinitely programmable up to 20,000 mm/min Input increment X/Y/Z: 0.01 mm Rapid traverse X/Y/Z: 50 m/min Setup mode X/Y/Z: 20 to 2,000 mm/min 4.5 Position Measuring System Resolution X/Y/Z: 0.001 mm Position tolerance X/Y/Z with direct measuring system: 0.010 mm 4.6 Working Area Travel X axis: 750 mm Travel Y axis: 600 mm Travel Z axis: 520 mm 4.7 Main Drive Working spindle: SK HSK Tool holder: steep taper SK 40 DIN 69871 A Tool clamping: hydraulic/mechanical 4.8 Tool Changer with Magazine SK Working spindle: 18,000 rpm Magazine positions: 92 Tool length from spindle nose: 315 mm Max tool weight (automatic change): 6 kg Max total tool weight in magazine: 270 kg Retention studs 4.9 Work Table NC rotary table with swivel axis Clamping surface rotary axis: 500 x 500 mm Centering bore: 50 H6 Max table plate speed: 21.5 rpm Max torque rotary axis: 1,674 Nm Max swivel torque: 2,019 Nm Swivel speed: 18.9 rpm Swivel range: 180 degrees Input/display increment: 0.001 degrees Weight abt. 310 kg Max. table load (centered): 250 kg Max. workpiece diameter: 628 mm Max. workpiece height: 500 mm 4.10 Pallet Changer 2 pallets with pitch hole grid Rotary movement: 180 degrees Longitudinal travel: 350 mm Lift: 75 mm Permissible load (one sided): 250 kg Permissible load (both sides): 500 kg 4.11 Installation Data Electrical supply according to EN 60204-1 Machine connection: TN S system L1 L2 L3 N PE Main connection: 3N PE, 50/60 Hz, 400/230 V Rated current at 100% duty cycle: 82 A Power consumption at 100% duty cycle: 57 kVA Max. pre-fuse: 100 A Pre-transformer Free cable length above floor: 0.8 m Connection cable as per DIN 5710 VDE 0100 Pneumatic Supply Compressed air, condensate-free and dust-free Recommended filter fineness: 50 μm Air volume without blow air: 50 m³/h Additional blow air for tool cooling: 25 m³/h Air pressure: min. 5.5 bar, max. 8 bar Pressure connection (machine side): Bosch 1823 351 01

Year of construction: 2001, condition: excellent (used), machine/vehicle number: 00287, Technical data Manufacturer: brown & sharpe Type: DEA Scirocco 101509 Year of manufacture: 2001 Serial number: 00287 Software: PC-DMIS 2019R1 Measuring range X = 1000 mm Pgjdpfx Ahei Dpggj Heg Y = 1500 mm Z = 900 mm Measuring table Length = 2280 mm Width = 1145 mm The machine can be modernized with new accessories according to the customer's requirements. Price: on request! Assembly and commissioning possible! We will be happy to provide you with a detailed offer. Note: Our offer is directed exclusively to professional customers. (Changes and errors in the technical data, specifications and prices and prices as well as subject to prior sale).

Condition: used, Year of construction: 2011, turning diameter 460 mm turning length 795 mm Pjdjxwzfyjpfx Ah Hsgg control MORI SEIKI M730 BM Swing diameter face slide 590/360 mm spindle passage 80 mm Traverse X/Z: 260/795 mm Number of working hours 19.552 h Cutting time 10.704 h spindle drive 18,5 kW total power requirement 40 kVA weight of the machine ca. 6,4 t dimensions of the machine ca. 3.994 x 3.056 x 2.187 m Chip chuck Ø250 mm. Chuck sub-spindle Ø170 mm. Holder HAINBUCH chip conveyor suction Bar feeder Hydrafeed Multiservo mod MSV max. bar length 1,600 mm

Condition: used, Year of construction: 2008, functionality: fully functional, 5-Axis Simultaneous Machining Center MAZAK Variaxis 630-5X II T with Turning Function Control: MAZATROL Matrix Year of manufacture: 2008 Travel - X: 630 mm Travel - Y: 765 mm Travel - Z: 600 mm Pgsdpfx Ahex Db D Aj Hog a-axis: +30 ~ -120° c-axis: +/- 360° Max. machining diameter: 730 x 500 mm Max. working height: 500 mm Number of tool changer positions: 120 Tool holder: HSK 63T Max. spindle speed: 18,000 rpm Max. rotary table speed: 1,100 rpm Rotary table diameter: 630 mm Workpiece swing diameter: 730 mm Accessories: - Chip conveyor and tank - Through-spindle coolant (IKZ) - Showa oil mist extraction system - Renishaw probe The machine is in very good condition and can be inspected under power at its current location.

Condition: excellent (used), Year of construction: 2002, 5-Axis Machining Center - Universal DECKEL MAHO DMU 70 EVO Year of manufacture: 2002 Control: MillPlus iT Heidenhain Machine hours: 33,289.6 h Spindle hours: 10,533.5 h Technical Data: X-axis travel: 750 mm Y-axis travel: 600 mm Z-axis travel: 520 mm Main Spindle: Speed range - main spindle: 20 - 18,000 rpm Drive power - main spindle: 35 / 25 kW Max. torque: 130 / 87 Nm NC Rotary Swivel Table: Clamping surface: 700 x 500 mm Swivel range, B-axis: 180° Rotatable, C-axis: 360° Max. table load: 350 kg Centering bore: 30 H6 mm T-slots: 7x 14H7 x 63 mm Table speed range: 21.5 rpm Tool Magazine: Number of tool positions: 32 Max. tool length: 315 mm Pjdpfxoxf Hlho Ah Hsgg Max. tool diameter: 105 mm Max. tool diameter with adjacent pockets empty: 130 mm Max. tool weight: 6 kg

Condition: good (used), Year of construction: 2008, In good technical condition and fully operational. Year of manufacture: 2008. Additional Y-axis ±60 mm Maximum spindle speed 3,000 min⁻¹ Pedpfxsxdcigs Ah Hjgg Spindle motor power 22/18.5 kW Maximum driven tool speed 6,000 min⁻¹ - 300 mm chuck with 90 mm through hole, spindle head A2-8 - Increased power and torque 25/30 kW, 1,000/1,300 Nm - Turning diameter 420-500 mm - Turning length 1,250 mm - C-axis, driven tools - NC tailstock, fully programmable, separate motor - Increased Z-axis power - New chip conveyor

Condition: used, Year of construction: 1998, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 550 mm, rotational speed (max.): 12,000 rpm, overall weight: 7,500 kg, For sale: CNC 5-Axis Machining Centre, manufacturer DMG, model DMU 60 P The machine is fully operational and ready for immediate use. In 2021, a new spindle was installed, and all required maintenance has been carried out. History: 2019: New ball screw (KGT) 2021: New spindle 2022: Single-shift operation 2023: Occasional job orders 2024: Taken out of operation but remained connected to power 12/2025: Dismantled, cleaned, and stored Technical Specifications: X travel: 600 mm y travel: 650 mm z travel: 550 mm Control unit: Heidenhain TNC 426 Spindle speed: max. 12,000 rpm Spindle drive power: 15 kW Max. torque: 130 Nm Tool holder: SK 40 Table diameter: 630 mm Max. table load: 500 kg Number of tool pockets: 60 positions Max. tool length: 350 mm Rapid traverse (X/Y/Z): 24 m/min Feed rate: 20 - 10,000 mm/min Total connected load: 44 kVA Space requirements: approx. 7.0 x 6.0 x 2.7 m Machine weight: approx. 7.5 t Please note: Vices or clamping fixtures are not included in this offer. Upon request, we can organise transport and loading, at an additional cost. Europe-wide service available. All prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team is happy to assist you. Trade-in or exchange possible! Psdpfx Ahowbhq He Hjgg Machinery Purchase / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your manufacturing needs? Or are you looking to sell yours? For more information or contact options, please visit our website.

Condition: good (used), Year of construction: 1999, Offered is a used CNC milling machine CHIRON FZ 22 S high speed with Siemens SINUMERIK 840D control. The machine is already dismantled and ready for loading. Manufacturer: CHIRON - Works 78532 Tuttlingen Type: FZ 22 S high speed Machine no.: 497-55 Chip conveyor: Knoll 340 K-1/500 Spindle hours: 2355 h year of construction: 1999 Weight: 6500 kg Inspection report measurement from 2021 available x-way: 750 mm y-way: 520 mm z-travel: 630 mm spindle holder: SK 40 CNC control: Siemens SINUMERIK 840D Podpfx Ahjkr E Nns Hsgg table size: 1150 x 570 mm max. table load: 1200 kg tool changing device: 20 pos. Coolant device operating voltage: 400 V total power requirement: 32 kVA space requirement W x L x H: approx. 2.00 x 3.80 x 3.0 m The price is net, plus VAT, ex works free loading.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, This multi-axis CNC lathe, CMZ TTL-66-66-T1Y-T2Y, was manufactured in 2021. It features a maximum bar capacity of 66 mm (both spindles), a turning diameter of up to 220 mm, and a main spindle power output of 35.5 kW. Pedpfx Asxmhdnjh Hegg The machine is equipped with two high-performance spindles with a 66 mm bar passage, two turrets with 12/24 tool stations, driven tools with 14 kW and 12,000 rpm, and Y-axis capability on both the upper and lower turrets. It includes a 35-bar high-pressure coolant system, complete with a filtration system and an additional tank. For more information about this lathe, please refer to the attached brochure or contact us directly. Equipment includes: - LPS for left spindle - Reduction tube for left spindle - Hainbuch AXFIX 65 collet chuck (standard) 2703/0008 for left spindle - Hainbuch AXFIX 65 collet chuck (standard) 2703/0008 for right spindle - Tool presetting device - Side-mounted chip conveyor (standard version) - Upper tool turret (T1) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75µm filter - Lower tool turret (T2) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75µm filter - Coolant wash nozzle - TA/06000/10 8,000W coolant chiller unit - Machine status indicator light - Tool life management system - Tool load monitoring - Programmable automatic parts catcher (pneumatic) - The workpiece extractor is equipped with a pneumatic gripper for automatic opening and closing to retrieve finished parts - Pneumatic ejector for the sub-spindle with 100 mm adjustable stroke. End position detection via sensor - Coolant supply through right spindle - Interface for bar feeder (unimag) - Preparation for extraction unit, connection flange Ø100 The machine comes complete with a chip conveyor, coolant unit, and tool package. It is available for immediate inspection under power, and available at short notice. Single-shift operated. Further information available on request.

Condition: ready for operation (used), Year of construction: 2018, Max. measuring dimensions X/Y/Z: 600mm/300mm/200mm, repeatability: +/-3µm, display error: +/-8µm, measuring modes: program measurements/single measurements/statistical measurements. Various accessories included. Documentation available. Pgedpfx Ahot H Rd Re Heg