Solid rubber tires 2 pieces

Continental Super Elastic 23 x 9-10 6,5F-10

Condition: new, Year of construction: 2021, total length: 2,770 mm, Tugger Dedpfoxpx Szsx Ah Ijkn Club Car Precedent Drive Electric Year built 2021

Condition: new, Year of construction: 2023, Product: CGM e41 Continuous 3-phase power: 41.0 kVA / 32.8 kW Maximum 3-phase power: 45.1 kVA / 36.0 kW Voltage: 230 /400 Volt Frequency: 50Hz Phases: 3 Engine: Model: Yanmar 4TNV98T-ZGECS EU Stage IIIA approved for stationary operation only Cooling system: Water Fuel: Diesel Cylinder: 4 Displacement: 3319 cm³ Intake: Normal Engine speed: 1500 rpm Consumption at 3/4 load L/h: 8.5 Generator: MECC ALTE Type: brushless AVR control Digital control ComAp AMF Dimensions and weight: Length: 2000 mm Width: 850 mm Height: 1275 mm Dodpjq A U Aisfx Ah Iokn Weight, dry: 880 kg Tank capacity: 200 l Oil pan Cooling water preheating Battery charge retention 3-way valve Sound insulation hood: RAL 5015 sky blue Base frame: Black

Condition: new, Year of construction: 2024, functionality: fully functional, pressure: 16 bar, input frequency: 50 Hz, type of input current: three-phase, temperature: 400 °C, input voltage: 6,000 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, type of cooling: air, Industrial Steam Turbogenerator Howden – Model KK&K TWIN CA46, NEW, never installed or commissioned, still under manufacturer’s warranty. Following a revision of our long-term industrial strategy, a Howden KK&K TWIN CA46 steam turbogenerator is available for sale, supplied complete as per the original OEM scope. The unit is BRAND NEW, fully manufactured and tested by the OEM, but it has never been installed or put into service. It remains under the manufacturer’s warranty and has been stored in a closed, controlled environment. Immediate availability eliminates typical production lead times, which for this type of equipment are generally 24–36 months. Main supply includes: - Steam turbine on skid with integrated gearbox - Synchronous generator supplied separately Turbine technical configuration: - Model: KK&K TWIN CA46 - Dual-casing turbine (Steam Part A + Steam Part B) - Integrated three-shaft gearbox (2 pinions + central wheel) - Controlled steam extraction between HP and LP sections (included) Djdpeyidvdsfx Ah Iokn Main design conditions: - Inlet steam pressure (HP): 16 bar(a) - Inlet steam temperature: 400 °C - Electrical output at terminals: up to 1,595 kW - Nominal speed: 1,500 rpm Electric generator: - Three-phase synchronous generator - Rated output: 1,994 kVA - Voltage: 6 kV – Frequency: 50 Hz - Cooling: IC31, air - Brushless construction, parallel grid operation ready Included systems: - Integrated baseplate oil system - Main mechanical oil pump and auxiliary electric oil pump - Local panel on skid - Control and protection panel with Siemens SIPROTEC 5 system - Electronic speed and pressure governor - Independent overspeed protection device - ENC-RfG turbogenerator simulation model Typical applications: - Industrial cogeneration plants - Energy recovery from process steam - Biomass and waste-to-energy plants - Combined production of electricity and process steam Status and conditions: - Condition: NEW - Year of manufacture: late 2024 - Never installed – never commissioned - Still under manufacturer’s warranty - Complete OEM technical documentation available - Installation and commissioning support from the manufacturer available Potential application fields: - Biomass and waste-to-energy plants, for electricity and process steam production, with immediate unit availability, avoiding multi-year production lead times - Industrial cogeneration (CHP) for facilities with continuous process steam use (paper, food, chemical, manufacturing industries) - Revamping / repowering of existing plants, as a fast-track alternative to new OEM supply with 24–36 month delivery lead times Price: on request. Further technical information and documentation available upon request.

Condition: used, fuel type: gasoline, empty load weight: 8 kg, color: red, gearing type: mechanical, Year of construction: 2024, TITLE: NEW ROZZI BRAND 6-BLADE OCTOPUS FOR HANDLING SCRAP AND BULK MATERIALS WITH ROZZI HYDRAULIC ROTOR REF.: 22-ATT-33 YEAR: 2022 MODEL: RHG280D MTR.: 59482 WEIGHT: 470 kg LOAD CAPACITY: 1800 kg CAPACITY: 280 lt PIN HOLE: 3.30 cm Dkodpevm Et Djfx Ah Ion The prices shown do not include VAT. Please contact the sales representative for an updated comparison of prices and conditions. For more information: Loris: 3484773001 URL: #glispecialistidelloscarrabile SCARRABILI AURORA operates in the sector of the sale and purchase of industrial and commercial vehicles specialized mainly in the waste sector. Specializing in trucks, trailers and hook-lift equipment. With a fleet of over 50 trucks and over 150 skips, containers with and without hook-lift cranes ready for delivery. S.E.&O Given the quantity of ads and details entered, Aurora invites you to verify the accuracy of the data entered with the sales staff.

Condition: excellent (used), Year of construction: 1984, power: 17 kW (23.11 HP), type of input current: three-phase, pressing force: 160 t, stroke length: 500 mm, operating speed: 200 mm/s, reverse speed: 125 mm/s, table width: 900 mm, table length: 630 mm, throat depth: 800 mm, ram plate width: 700 mm, ram plate length: 450 mm, oil tank capacity: 500 l, total length: 22,000 mm, total width: 12,500 mm, total height: 34,500 mm, overall weight: 7,000 kg, operating pressure: 160 bar, installation height: 800 mm, pressure: 250 bar, Hydraulic press PYE 160 S/1M. Year of manufacture: 1984. Manufacturer: VEB Wema Zeulenroda (Germany). The machine has undergone a general overhaul. Specifications: Maximum pressing force: 160 tons. Operating pressure: 16 MPa. Upper table: 700 x 450 mm. Lower table: 900 x 630 mm. Daylight opening: 800 mm. Cylinder stroke: 500 mm. Downward speed: 200 mm/sec. Upward speed: 125 mm/sec. Power requirement: 17 kW. Oil tank capacity: 500 l. Weight: 7000 kg. Height: 3450 mm, Length: 2200 mm, Width: 1250 mm. Machine in very good condition. Inspection and test under power possible. Dodeqy E I Rspfx Ah Ijkn

Condition: used, mileage: 169,000 km, power: 120 kW (163.15 HP), first registration: 04/2015, fuel type: diesel, overall weight: 5,000 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 6, Year of construction: 2015, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), soot filter, Sprinter 516 CDI 4X4 First registration: km 4X4 - ALL-WHEEL DRIVE Combi - 6 seats Air conditioning Auxiliary heater Hill-start assist Euro 6 Cruise control Workshop shelving installed Tires in very good condition (70-80%) Austrian registration ----German/English/Serbian/Croatian/Bosnian/Bulgarian..... Goran German/English/p?????/?????..... Roman We are happy to assist you with financing or leasing options. EU sale: net price upon presentation of company documents and VAT number. Dkedpfx Asx Uvwneh Isn VAT deposit: €2,000 Our services for you: - Customs license plates - Export documents and EUR1 certificate - Worldwide transport - Accommodation options - Transfer to Munich Airport or Passau railway station

Condition: new, Year of construction: 2025, functionality: fully functional, fuel type: gas, power: 2,539 kW (3,452.08 HP), output voltage: 400 V, output frequency: 50 Hz, total length: 6,600 mm, total width: 2,000 mm, total height: 2,300 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: MTU, =Scope of supply= 2 x Genset mtu 20V4000L64FNER, 400 V for operation with Natural Gas. 2 x gas train of 116-250 mbar inlet pressure with 1m flexible rubber-metal connecting hose. 2 x set of sylomer stripes for genset foundation installation. 2 x set of flexible connection for engine coolant circuit with flange connection 2 x set of flexible connection for mixture coolant circuit with flange connection 2 x set of exhaust bellows with flange connection and companion flange 2 x set Maintenance-free starter batteries, mounted on base frame. Dkedpfx Ajy Hddmoh Ijn 2 x MIP (MTU Interface Panel) incl. Black Start option and ECU Remote Control interface =Technical specifications= Time for delivery - in stock Engine type - mtu 20V4000L64FNER Electrical power - 2539 kW Engine speed - 1500 rpm Electrical efficiency - 43.9 % Total efficiency - 88.6 % Alternator type - Leroy Somer LSA 54.2 L14 Voltage - 400 V Frequency - 50 HZ < 500mg NOx at 5% O2 =Other information= Transport dimensions (LxWxH) - 6.6x2x2.3 m Production country - Germany

Condition: excellent (used), -Dimensions: 1440x2700x2600 mm -Trolley: 600x800 -Model: E8/64 Dodpswxmf Djfx Ah Ijkn -Serial number: 9300038973 -Year: 04/2016 -Footprint: 2.71 m2 -Maximum temperature: 280°C Lroyjwxmf De Tdxuger -Door clearance: 830 mm -Heating power: 57 kW -Voltage: 400 V -Weight: 1270 kg

Condition: used, Year of construction: 2012, operating hours: 28,000 h, machine/vehicle number: 2210461, disponibile blocco motore,2 testate14 basi teste,volano,12 bielle 12 pistoni,coppa olio motore,albero motore (da riparare) Dkjdpfx Aeynwtpsh Ion

Condition: good (used), Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, double turntable steering, heavy-duty trailer -Heavy-duty transport vehicle: Industrial trailer with 2-axle steering, suspended -Platform: 1800/950/H590 mm Dkjdpoub D Rfofx Ah Ijn -Load capacity: 3 t -Tires: 305/415x90 -Drawbar: reversible, trailer coupling on both sides -Total dimensions: 2820/950/H590 mm -Weight: 362 kg