Vertical dryer FV 2 /3500-46 UVR2M

Cefla 130000€ FV 2 / 3500-46 SERTARE UVR2M

Condition: excellent (used), UNLOADER (SINGLE-CAGE) Giedpjcggy Sofx Ahvsp - Vacuum system with its pump - Top holding bar deplacement (pivoting) of 180° - Horizontal-longitudinal bars (rocker arms) for the vacuum cups supporting - In-side lifting table, surface with motorized-rollers - Front-side sliding door (or metal grid) to out-feed the stack of the panels - Separated electric and command panel - Out-side rollers way (on ground) to out-feed pile of panels from the Unloader - Out-side motorized rollers table (which brings panels to the Unloader), with also cross motorized conveyor belts (at 90°) - Working capacity (cycles/min): 12-15 - Min/Max panels thickness mm 10 - 40 - Min dimensions of the panels mm 250 x 320 (estimated) - Max dimensions of the panels mm 1200 x 3000 - Total installed motor power KW 10

Condition: good (used), Year of construction: 2007, Technical characteristics : - Max machinable length 3200 mm - Minimum machinable length 200 mm - Maximum width 200 mm - Minimum width 40 mm - Maximum workpiece height 130 mm - Depth with max Ø to tenon 320 mm: 105 mm - Tenoning carriage speed min / max 0/100 m / min - Min / max profiling speed: 3/15 m / min Tenoning: 1- end cut saw 5.5 hp (4 kW) Saw Ø 400 mm 2- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard 3- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard Vertical positioning with continuous axis 4- Digital angular adjustment clamp Profiling: 5-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tools 130/240 mm Axle stroke 280 mm Time-delayed anti-shattering intervention during calibration Double direction of rotation Vertical and horizontal positioning with continuous axis 6-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Axle stroke 280 mm Vertical and horizontal positioning with continuous axis 7-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Vertical and horizontal positioning with continuous axis 8-: close-out recovery group Vertical and horizontal positioning with continuous axis Device for extracting the shutter 9-: lower horizontal shaft for groove Vertical and horizontal positioning with continuous axis 88.5 hp (66.4kW) 10-: digital guide 11-: Return of parts to the operator NO TOOLS AVAILABLE Gsdpfx Ahst R T Hcevsip OBTAIN ADDITIONAL PHOTOS NOTE: SUBJECT TO CHANGES IN TECHNICAL DATA

Condition: used, Year of construction: 2013, 3D-Venjakob Perfect Air Jet painting line: - Manufacturer: Venjakob - Year of construction: 2013 - Working width: 1.300mm - Max. part length 6.500mm - In U-shape with angle transfer Consisting of: Gisdpfx Aju Afu Rehvep 1. loading belt, length 3,050mm 2. free space für Sanding machine (only optional, not included in the price) 3. spraying machine VEN SPRAY PERFECT, length 5.510mm 4. flash-off dryer OIR, length 6,000mm 5. nozzle dryer VEN DRY AIR JET, length 4,160mm 6. angle transfer 180 degrees, with nozzle dryer 7. nozzle dryer VEN DRY AIR JET, length 5,160mm 4pcs. IR tubes 8. nozzle dryer VEN DRY AIR JET, length 5,160mm 4pcs. IR tubes 9. nozzle dryer VEN DRY AIR JET, length 5.160mm 4 pcs, IR tubes 10. 3D UV dryer, VEN DRY UV, GA + HG 11. removal area, belt of the UV dryer Further information: On request

Condition: like new (used), Year of construction: 2019, I sell the horizontal throughfeed CNC working centre Vitap Point K2 2.0, Year 2019. Gisdpfx Asvx Dz Djhvop Configuration: 1 pc. milling spindle 5,0 KW 12 + 4 + 4 pcs. drilling units 1 pc. grooving saw Backfeeding system to return the elements to the operator or move forwards as a throughfeed machine. Workpiece max. dimension - x 1250 x 50 mm Workpiece min. dimensions 270/400 x 185 x 4 mm Total area covered: 2900 x 1650 mm Total weight: 950 kg. With full documentation and CE. Very good condition. Available immediately.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, 🚨 FOR SALE: 2x Kardex XP500 Machines – Top Condition! 🚨 Giodpfx Ahovuvbzjvop For sale for removal. We are building a new warehouse and do not require these units. In good condition, recently serviced, well maintained throughout the time we have owned them. Price is per unit, negotiable. Shelves can be easily reconfigured to accommodate different product types / sizes. Bins can be sold with machines if desired. Machines are currently configured for dual tray presentation. Also includes 10-bay Kardex SortBench. Details: Model: Kardex XP500 Quantity Available: 2 units Condition: Well-maintained and fully operational Key Features: High-density storage to maximize space utilization Fast and reliable picking system for enhanced productivity Built for heavy-duty industrial applications Ergonomic design to improve workplace safety Energy-efficient operation Why Kardex XP500? These machines are perfect for businesses looking to improve efficiency, save floor space, and boost order-picking accuracy. Location: The units are currently stored in Wanganui, New Zealand.

Condition: new, Year of construction: 2024, MONOBLADE EDGER Gijdpfx Asfw Nv Rshvop lenht of cut from 4,2 to 8,2 mt max depth of cut 160 mm parallel guide hopper

Condition: refurbished (used), FULL LINE of Drilling, max working width mm 3200, with fast automatic handling equipment. Composed of the following machines: A) LOADER (Portal) "RBO" Winner C 3200 with double pick-up and central motorized rollers table. With 2 on-ground motorized rollers ways to in-feed the piles (stacks) of panels to loader. B) TRANSFER (Connecting Rollers Table with 90° conveyoring belts) “RBO” Mod. Transfer TA 90° Gsdpfsdfgg Iex Ahvoip C) 1st Auotmatic BORER "BIESSE" Mod. Techno FDT with No. 2 Horizontal Units + No. 7 Vertical Bottom Units D) 2nd Automatic BORER "BIESSE" Mod. Techno FDT with No. 2 Horizontal Units + No. 7 Vertical Bottom Units E) TRANSFER (Connecting Rollers Table with 90° conveyoring belts) “RBO” Mod. Transfer TA 90° G) UNLOADER-STACKER (Portal) "RBO" Winner SC 3200 with double pick-up, with double storage station, with central motorized rollers table. With 2 on-ground motorized rollers ways to out-feed the piles (stacks) of panels from the Unloader

Condition: ready for operation (used), Year of construction: 2014, operating hours: 48,274 h, number of axes: 6, pressing force: 326 t, This TRUMPF TruBend 7036 press brake was manufactured in 2014. It features a robust welded steel frame, electro-hydraulic top drive, and a 2D graphic control DA 69 system on a 10.4" color screen. The machine includes a CNC backgauge with 6 axes, hydraulic tool clamping, and CNC crowning for precise bending. Regularly serviced under a TRUMPF maintenance contract. Contact us for more information about this machine. • Free column clearance: 3680 mm • Installation height: 535 mm • Control system: 2d graphic control da 69 on windows with 10. 4" color screen • Electrical equipment: for three-phase current 400 v / 50 hz • The machine was serviced annually • Maintenance contract in place • Sturdy machine frame, welded all-steel construction • Press beam with high bending strength • Highly dynamic electromechanical direct drive (torque motor) • Electro-hydraulic top drive via proportional valves • Modern block hydraulics • Inductive length measuring system with temperature compensation • CNC backgauge system: 3-axis (X1, R1, Z1) and 6-axis options • Rack and pinion drive for X and R axes • Safe, front-accessible movement of stop fingers • Modufix top tool holder system, self-centering, manual clamping • Manual lower tool holder for EV dies, hardened, programmable offset • Integrated TRUMPF TASC 6000 control • Numerical workshop programming • Embedded Windows XPe operating system, Pentium M 1.1 GHz • 1 GB RAM • 15-inch touchscreen • Network-enabled, teleservice via modem • Control cabinet climate control • Side-hinged safety doors and rear protective cover • 2-button foot switch for standing or seated operation • Rear work area LED lighting • Front work area LED lighting • Ergonomics package: comfortable front work surface and footrest • 2 storage brackets and 2 document trays • 24000 operating hours, brakes replaced 2024 • Tools maintenanced by TRUMPF, all in tolerance Additional equipment • Backgauge system with 5 axes and control cabinet climate control • Upper tool clamping: hydraulic and hardened • Lower tool clamping: hydraulic • CNC Crowning • BendGuard safety device • Foot switch • 2x support consoles, front • 1x bending aid with 900 mm parking position • Table extension for base table / additional table Technical Specification Gijdpfex D D Hyjx Ahvep Bending Length 1020 mm

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 10006565, Weinig Powermat 1500 Working width 30 - 310mm (with tool flight circle 93-125mm) Working height 100 - 200mm (with tool flight circle 93-125m) Number of spindles 6 Spindles bottom 2 Spindles right 1 Spindles left 1 Spindles top 2 Spindle arrangement u-r-l-o-o-u Spindle speed max 8,000 rpm Spindle diameter 40 mm Powerlock tool holder incl. chamfering unit Separate motor for each spindle Electronic feed incl. brake, infinitely variable 5-40 m/min. Durofer pointed tooth rollers Short infeed table 1.2 m long with 2 driven rollers above the table Hard-coated machine table surface Manual lubricant pump Gedpfx Ahsrq Ebfsveip WEINIG Comfort Set Control system WEINIG MEMORY PLUS-SYSTEM CE mark Declaration of Conformity

Condition: new, Year of construction: 2026, Technical specifications: • Extraction capacity ~ 5200 m3/h • Motor power 3.0 kW • Speed 3000 rpm • Voltage 400V, 50Hz • Suction connection 250/200mm • Filter area 13.7 m2 • Speed 28m/sec. • Number of filters 28 • Dimensions 752 x 1982 x 2144 mm • Weight 300kg • Category of filters G Gisdpfx Aed H Rf Tohvop • Polyester filter material • Noise 80 dB without connection, 65 dB when connected to the machine via a pipe Delivery: - Fulfill H-2 Norms - 5 micron polyester filter - 2 containers - Running gear - Filter cleaning using a controlled vibration system + 850 euros for the models with fire extinguisher (Safe System)