Emulsion Mist Extraction

Camfil Handte APC EM-DS 1-0,75 NF

Condition: new, Year of construction: 2024, Laser source: 12 kW Raycus/IPG Laser head: Precitec Pro-Cutter 2.0 Control system: FSCUT 8000 Ndsdji Ar Ruopfx Abgjd Effective working area: 1520x3050 mm Max. Positioning speed: 120 m/min Max. Acceleration: 1,5 m/s² Positioning accuracy: 0,02 mm/m Repeatability: 0.03 mm/m Max. Table load: 1500 kg

Condition: used, High-lift pallet truck, pedestrian stacker, manual hand pallet stacker LOGITRANS type LF 1001 / 1600 Tool lifter Serial number: 051E04006100 Year of manufacture: 2005 Load capacity: 1000 kg Lift height: 1600 mm Fork length: 600 mm Platform size: 800 x 650 mm Overall length: 1200 mm Overall width: 800 mm Height: 1930 mm - Lifting via mechanical lift hydraulics, pump action using the tiller arm - 2 lifting speeds: approx. 36 strokes to lift to 1600 mm, or approx. 10 strokes for 10 cm lifting height. - Manual movement by pushing - Fork lifting in single mast with free lift Ndodpfx Absdz Spmogsd Own weight 198 kg Very good condition

Condition: used, Year of construction: 2024, controller manufacturer: Sonstige, _____ Description: Year of manuf. : 2024 Control : Sonstige In General: Year of manufacture:2024 Ndedpfxsxv Nkuj Abgod Traverse path X/Y/Z:800/ 1,000/700 mm Maximum table load:800 kg Measuring accuracy:0.0005 mm Repeat accuracy:0.002 mm Touch probe:Renishaw PH 10M Plus

Condition: like new (used), Year of construction: 2020, Max. airflow 840 m³/h Connection diameter 200 mm Drive power 0.55 kW Ndodpfx Abowmlgcsgod Very little used, 2 units available

Condition: used, Year of construction: 1998, pressure 160 t stroke 30 - 90 mm no. of strokes 50 - 300 /min distance between columns 1270 mm dayligth (stroke and adjustment up) 590 mm column travel -side 440 mm Nsdpfx Abjvut Uxegodd table surface area 1250 x 900 mm hole in the table 950 x 300 mm ram surface 1250 x 800 mm ram adjustment 100 mm material width 200 mm material thickness - 6,0 mm feed length 0 - 120 mm power requirement 64,5 kW Weight 21,00 t dimensions of the machine ca. 3,0 x 2,2 x 3,9 mxmxm permitted for automatic mode according to the CE-Norm with infinitely variable drive, hydraulic clutch/brake combination (make Desch), automatic stroke adjustment, motoric ram adjustment, fix table, circular oil lubrication mechanical roll feed Bruderer BBV 205/120 with drive via main shaft / pivot shaft of the press consoles Guethle CK 01/0800

Condition: refurbished (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 150 583, total height: 3,975 mm, ram adjustment: 125 mm, installation height: 410 mm, table height: 1,220 mm, total width: 2,725 mm, total length: 3,510 mm, table length: 1,500 mm, table width: 1,200 mm, pressing force: 200 t, control cabinet height: 2,200 mm, control cabinet length: 340 mm, control cabinet width: 600 mm, type of input current: three-phase, clearance between the columns: 900 mm, distance between side stands: 900 mm, distance between stands: 1,520 mm, overall weight: 3,700 kg, year of last overhaul: 2025, ATTENTION: The machine suffered transport damage and will be completely overhauled mechanically and electrically before delivery in 2025/2026. Pressing force: 2000 kN Adjustable stroke: 20 - 160 mm Ram adjustment: 125 mm Strokes per minute: 30 - 180 Die installation height: 410 mm Njdpfx Abow H Arvjgedd Table dimensions: 1500 x 1200 mm (Press will be delivered with a brand new table plate, T-slot design of your choice) Ram dimensions: 1500 x 1000 mm Control: SIEMENS S7 1500 series, Year of manufacture: 2020

Year of construction: 2013, condition: excellent (used), Lifting and tipping device - swiveling device for emptying, filling, tilting bulk goods / small parts etc. Manufacturer: Schuessler Type: HS-F1000 Year of construction: 2013 Hydraulic pivoting Load capacity: 1000 kg Nodpfeh Dbnpjx Abgedd Movable, locking spindle for swivel operation. Version with bulk material chute, infinitely adjustable manually. Button operation up/down and emergency stop. Weight: 700 kg

Year of construction: 2018, condition: ready for operation (used), Gross volume: 90l, max. usable volume: 60l, max. filling weight: 175kg, drive type of the table: frequency-controlled electric gear motor, connected load table drive: 4kW, nominal speed table: 213/min, tilting drive type: hydraulic cylinder, tilting angle: 49°, max. tilting height when emptying: 2200mm, loader tilting drive type: hydraulic cylinder, tilting angle: 41°, max. tilting height when emptying: 2700mm, buffer drive type: electric unbalanced motor, drive power: 0.3kW, tilting drive type: hydraulic cylinder, tilting range: -25° to 12°, screening machine drive type: 2x electric unbalanced motor, drive power: 2x 0.25kW, media return chute drive type: electric unbalanced motor, drive power: 0.19kW, delivery rate hydraulic unit: 8.0l/min, operating pressure: 170bar, drive power pump motor: 3kW, tank volume: 30l, valve voltage: G24, length: 2812mm, width: 2094mm, operating hours: 14,021h, motor running hours: 427h. Application areas: edge rounding, coarse and fine grinding, descaling, degreasing, shining, polishing, deburring, cleaning. With documentation, an on-site inspection is possible. Ndedpjw S Tymsfx Abgjd

Year of construction: 2015, condition: used, Technical details: suction capacity: 1600 m³/h filter: siehe Foto weight of the machine approx.: 85 kg connected load: 0,75 kW dimensions L x W x H: ca. 1,0 x 0,6 x 0,7 m Oil mist separator - Dry separator Mechanical air filter for oil and emulsion mist Application: Extraction and filtering of oil and emulsion mist as well as smoke and aerosols Space requirement: kThe IF-Vario can be installed at the extraction point for ceiling extraction, as well as on the hall ceiling, on the walls with wall racks or on single-column bases in the hall for recirculating air operation. Protection class IP 54 Nsdewhu Thjpfx Abgodd *

Condition: new, Year of construction: 2025, Laser fiber cutting machine GEP Series A modern, fully enclosed fiber laser for sheet metal cutting. The offer includes a laser with a power from 1000W to 6000W, and the highest quality components ensure long and trouble-free use of the fiber laser. Fiber optics laser cutters constitute modern devices with many advantages. These are not only a perfect and more profitable alternative to the CO2 technology, but they also possess a lot of pros by themselves, such as improving the production by considerable margin and increasing its quality. FIBER technology allows for cutting sheets and other materials of various thickness: from very thin to very thick. The length of a wave in a FIBER laser is 1.064 micrometre long. The biggest advantages of the laser are failure-free optical fiber cable no elements that wear out the source of the fiber optic laser takes 1/3 less space high energetic efficiency - 100000 hours of work universal applicability (specific metal sheets, carbon and stainless steel, copper, brass, aluminium, titanium) Optical fiber laser increases the efficiency by 80% reduces the handling costs by 70% saves 80% of energy minimises the consumption of gas saves space in the workplace by 30% Technical parameters WORKING AREA 1500x3000 mm | 2000x4000 mm | 2000x6000 mm POWER 1000W 2000W 3000W 4000W 6000W POSITIONING REPEATABILITY ACCURACY ±0.02 mm/m MAXIMUM SPEED 120 m/min MAXIMUM ACCELERATION 1,5G DIMENSIONS 8850x2850x2310 mm POWER SUPPLY 400V 50Hz Safety and pollution Fully built-on laser Observational window with a laser protective glass compliant with the European CE marking The smoke produced by cutting can be filtered internally, and not pollute environment Sliding gate made of annealed aircraft aluminium The construction of the sliding gate is made of annealed aircraft aluminium, formed with a strength of 4300 tonnes, achieving unprecedented rigidity. Aircraft aluminium has many advantages: high rigidity (higher than cast iron), small mass, resistance to corrosion and oxidation as well as susceptibility to machining. Replaceable working table Njdsizi S Ijpfx Abgsdd Replaceable working table consists of upper and lower platforms, whose movement and swapping are controlled through the controller. The machine can swap the platform in 15 seconds. Welded bed made of rectangular profiles The inner structure of the bed adopts a metal honeycomb structure which is welded by a plurality of rectangular tubes. Inside the tubes, stiffeners are placed to increase the strength and tensile strength of the bed, and also to increase the strength and stability of the guide rail to effectively avoid deformation of the bed. RayTools head Automatic focus regulation – Autofocus – The software automatically regulates the focusing lens during cutting metal sheets of various thickness. The speed of automatic focus regulation is 10 times higher than the speed of manual regulation. Greater range of manual regulation – The range of regulation -10mm - + 10 mm, precision of 0.01 mm is useful in when it comes to materials of different thickness (0–20 mm) – Below 1500W. Long durability. Collimating lenses and converging lenses possess a heat sink which cools down water, in turn decreasing the temperature of a cutting head, in order to improve the durability of the cutting head. The laser uses components from world producers