C-profile f. push-through protection

C-Profil / Gesamtlänge ca. 2.775 mm / Abm. 50x50x15 / sendzimir verzinkt

Condition: not inspected (used), Year of construction: 2008, Parker Hannifin Instron Hydraulic power unit Year of construction 2008 Power 90KW Main fuse 200A Working pressure 285bar flow rate 165L/min Tank 850 litres The offer is aimed exclusively at traders within the meaning of § 14 BGB No sale to private individuals! Njdpfsq Nyw Asx Ahvjku

Condition: good (used), functionality: fully functional, Layher uprights 3.00 m used – original Allround uprights for system scaffolding These used Layher uprights of 3.00 metres are original parts of the Layher Allround scaffolding system. The uprights form the vertical backbone of your scaffold structure and are suitable for nearly any type of construction project, from new builds to renovations. The uprights feature the well-known rosette at fixed intervals, allowing you to quickly and safely connect ledgers, braces, or consoles. Despite visible signs of use, they are in good technical condition and ready for immediate deployment. 🔧 Specifications Length: 3.00 metres Type: Layher Allround system upright Material: Galvanised steel – weather resistant and durable Nedpew Nh U Tsfx Ahvsku Connection: With fixed rosettes for fast coupling Condition: Used, functionally checked, with normal signs of use Note: export only

Condition: used, MIG MAG welding machine, shielded gas welding machine CLOOS Type GLC 357 N MIG MAG welding power source Serial No. 576 Year of manufacture: approx. 1985 Rated output: 350 Amps Output: 350 Amps - 80% duty cycle 310 Amps - 100% duty cycle Nodpfx Ahshubg Tsvsku Infinitely variable adjustment range Connection hose package: 4.5 meters Power supply: 380 Volt, 50 Hz, 32 Amp plug - 2-stroke and 4-stroke welding function - External wire feeder type CK 72 ZK with 2-roll drive and 4.5 meter hose package - 3 meter hose package with central connection and CLOOS hand torch - Water-cooled - Pressure gauge for gas cylinder - Welding machine equipped with 1 mm welding wire Space requirement L x W x H: 1250 x 600 x 1100 mm Weight: 260 kg

Condition: used, Year of construction: 2021, Lindner Urraco 95 DK – Year of Manufacture 2021 – Well-Maintained Condition For sale is a Lindner Urraco 95 DK from 2021 with 7,230 recorded operating hours. The shredder is in a well-maintained and ready-to-use condition. The exact condition can be seen in the photos. The machine is equipped with the DK4 package, featuring a reinforced gearbox and a reinforced cutting frame. — Specification / Scope of Delivery • 1 set of armoured shafts HW 8/10 with clearing combs and breaker bar, suitable for scrap and waste • 1 set of used shafts HW 8/10 with clearing combs and breaker bar, also for scrap and waste • DK4 package with reinforced gearbox and reinforced cutting frame — Technical Data – Lindner Urraco 95 DK Model: Lindner Urraco 95 DK Year of manufacture: 2021 Operating hours: 7,230 Engine power: approx. 566 kW (approx. 770 HP) Emissions standard: Stage V / Tier 4f (depending on version) Shaft length: approx. 2,500 mm Shaft diameter: approx. 870 mm Maximum torque: up to approx. 480,000 Nm Machine weight: approx. 46 t Dimensions (L x W x H): approx. 9.2 m x 2.55 m x 3.2 m Chassis: crawler tracks, hydraulically driven Application areas: scrap, commercial waste, bulky waste, mixed waste, wood, recycling material — Condition: Well-maintained machine Fully operational Sale as inspected on site Additional Information / Maintenance History Nksdex Nkhqepfx Ahvsu The machine had a full maintenance and service contract directly with Lindner until recently. All maintenance and service work was carried out professionally in accordance with the manufacturer’s specifications and documented. Notes: • Sale is without any warranty or guarantee. • No return or renegotiation. • Subject to prior sale. All information provided is without obligation. The seller accepts no liability for possible errors, omissions, or changes in the details. Sale is exclusively subject to prior sale.

Year of construction: 2025, condition: new, Instantaneous water heater with tubular heat exchanger directly in the boiler water * Low space requirement and low weight * Energy savings of up to 10%! * low maintenance * easy to clean * Optimum price/performance ratio Nedpfot Eui Ijx Ahvoku * Optionally with oil or gas burner Technical data: * Boiler output 40 kW * Hourly output up to 550 liters (10-78 °C) * Dimensions (H/W/D) approx. 140 x 100 x 115 cm * Empty weight approx. 190 kg ##### RINK - Pasteurizers for more than 30 years Proven technology - more than 500 units in customer use

Condition: used, mileage: 467,190 km, power: 85 kW (115.57 HP), first registration: 03/2008, fuel type: diesel, overall weight: 2,770 kg, color: white, gearing type: mechanical, number of seats: 2, Equipment: air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: Electrically adjustable and heated exterior mirrors, both sides; rear door without glazing (opening angle 180 degrees); full-height bulkhead; radio pre-installation; cab seats: comfort driver's seat; fleece battery 95 Ah; additional heater; two-way speakers in front. Additional equipment: Driver's airbag; model: Vito Panel Van; aspherical exterior mirrors, both sides; brake assist; 200 A alternator; body type: panel van, long version; steering wheel (mechanically adjustable steering column); truck registration; engine 2.1 L - 85 kW CDI; rear fog lamp; pollen filter; wheelbase 3200 mm; low-emission according to Euro 4 Gr. III emission standard; seat upholstery: fabric, flat-weave anthracite; service interval display Assyst. * Mercedes Vito 111 CDI * Refrigerated box van * Engine running, power generator * Manual transmission * VIN: WDF63960313409509 * Engine type: 646980 * Displacement: 2148 cc * Power: 85 kW * Kerb weight: 2015 kg * Payload: 680 kg * Gross vehicle weight: 2770 kg * Wheelbase: 3200 mm Njdeta Ix Ejpfx Ahvsku * Loading area length: 2645 mm * Vehicle length: 4995 mm * Vehicle width: 1906 mm * Vehicle height: 1903 mm * Tires: 205 / 65 R 16 * Currently, we cannot start, but normally everything works. * Margin taxed (differential taxation) * All information without guarantee Tel./WhatsApp:

Condition: like new (used), Year of construction: 2024, operating hours: 2,000 h, functionality: fully functional, A nearly new scrap shear is for sale, which can be inspected in operation at any time. Nodpfx Ahsykzuievjku

Condition: new, Year of construction: 2026, Introducing the latest model of the CORMAK WL3000 industrial laser welder, which combines advanced FIBER technology with innovative design solutions, offering unparalleled precision and efficiency. This device is designed for welding various types of metals, which ensures the quality and repeatability of welds at the highest level. Thanks to the 3-in-1 function enabling welding, cutting and laser cleaning, the device is versatile and effective in many industries. Why choose CORMAK WL3000? The CORMAK WL2000 laser welding machine is the perfect solution for professionals looking for reliability, precision and efficiency. Its innovative design and advanced cooling system make it a future-proof device that can handle even the most demanding welding tasks. Pre-order now and take advantage of this unique offer! Key Features and Benefits Nsdpfx Ahekkbw Ujvoku Advanced cooling system : A new, more efficient water cooling system ensures optimal operating temperatures, allowing you to work longer without interruption and increasing the lifespan of your device. Innovative design : The ergonomic and lightweight design of the welding head allows for welding even in hard-to-reach places. Thanks to the adjustable spot size (0-5 mm) and replaceable nozzles, the operator has full control over the welding process. Easy to use - thanks to the solutions used and the well-thought-out design, the operator can start working after a short training Low indirect radiation, just wear protective glasses to filter strong light when working Much faster welding than traditional methods, productivity can increase by 3 to 10 times Concentrated beam: slight change in structure due to small heat-affected area, Repeatability of welds, the weld seam is nice, the welds are of high strength. Very thin materials such as 0.5 mm stainless steel can be welded. Welding option with or without wire. The integrated laser cleaning function increases the range of applications of the device. Possibility of using the cutting option - ensures excellent cutting quality, without mechanical processing. Technical parameters Maximum power 3000 W Laser wavelength 1070nm Fiber optic length 10m Working modes Continuous / Modulated Air pressure 10 - 15 L/min Welding speed 0-215mm/s Automatic wire feeder Ø 0.8 - 2.0 mm Maximum power consumption ≤11.0kW Focal length 150mm Cooling system water Operating voltage 400V Shielding gas consumption 20L/min Dimensions 600x1100x1100mm Weight approx. 207 kg

Condition: ready for operation (used), functionality: fully functional, power: 83 kW (112.85 HP), overall weight: 6,000 kg, total length: 460,000 mm, total width: 4,000 mm, total height: 4,300 mm, Year of construction: 2024, operating hours: 300 h, type of input current: three-phase, With shredder, centrifuge, and big bag filling station. Includes spark detection and extinguishing system. Approx. 300 operating hours, year of manufacture 2024. Suitable for stainless steel, nickel alloy, and titanium. Throughput capacity up to 1 ton/hour, depending on material. Total connected load: 83 kW. Overall length: 46 m. Height: 6.2 m. Price on request. Available at short notice. Location: Germany. Nkedpfx Aeq Nmw Ishveu

Condition: used, Year of construction: 2004, total length: 6,240 mm, Tugger Nsdpfxjxyalko Ahvsku Rofan TPR-10 Drive Diesel Year built 2004