Refrigerant compressors system Bitzer

Bitzer CO2

Condition: used, Refrigerant compressors system Bitzer -Type: 4HTC-20KI-40S (x3), 2HHC-2KB-40S (x2) Fgodpfx Ajy Aw S Njlqob -Volume: 12 m3/h (x3), 4.34 m3/h (x2) -Control cabinet included -Dimensions: 3200 x 870 x 1850 mm -Cabinet dimensions: 2050 x 1200 mm -Items in magazine: 1 -Reference number: Z122 -Condition: Used in very good condition, ready to work

Condition: good (used), functionality: fully functional, total length: 2,750 mm, total width: 2,800 mm, total height: 1,830 mm, space requirement length: 2,800 mm, space requirement width: 2,850 mm, space requirement height: 1,900 mm, motor manufacturer: Bitzer, volume flow: 940 m³/h, Two used Bitzer screw compressor skids for low-temperature applications on Freon. Both skids are supplied with a shared control panel. Originally, each skid served its own cold storage room, but the capacities listed in the specifications are combined. Skid 1 is equipped with two Bitzer HSN 7461-70-40P semi-hermetic screw compressors, a Bitzer FS 3102 liquid receiver, a Bitzer OA4088 oil separator, a brazed plate heat exchanger used as an economizer, a brazed plate heat exchanger for heat recovery, and pressure and safety switches. This skid has a displacement of 440 m³/h at 50 Hz and 532 m³/h at 60 Hz. Fgodpfx Alsx Ap Hpsqob Skid 2 comes with two Bitzer HSN 7471-75 semi-hermetic screw compressors, a Bitzer FS 3102 liquid receiver, a Bitzer OA4088 oil separator, a brazed plate heat exchanger used as an economizer, a WTT GmbH WP 7M-44 brazed plate heat exchanger for heat recovery, and pressure and safety switches. This skid has a displacement of 500 m³/h at 50 Hz and 600 m³/h at 60 Hz. Bitzer HSN 7461-70-40P (x2) capacities: -20ºC/+40ºC: 229.6 kW -30ºC/+40ºC: 157.4 kW -40ºC/+40ºC: 102.0 kW -45ºC/+40ºC: 79.8 kW Bitzer HSN 7471-75 (x2) capacities: -20ºC/+40ºC: 240.6 kW -30ºC/+40ºC: 165.8 kW -40ºC/+40ºC: 109.0 kW -45ºC/+40ºC: 86.0 kW

Condition: used, Refrigerant compressors system Bitzer Fgsdpfxsy Aw R Ee Alqsb -Type: 2JSL-2K-40S (x1), 2HSL-3K-40S (x2), 4HTC-20K-40P (x2), 4HTC-20K-40S (x1) -Volume: 3.48 m3/h (x1), 4.34 m3/h (x2), 12 m3/h (x3) -Cooling capacity for CO2: approx. 96 kW at -20°C/40°C -Dimensions: 3980 x 880 x 2050 mm -Items in magazine: 1 -Reference number: Z120 -Condition: Used in very good condition, ready to work

Condition: good (used), Year of construction: 2021, cooling capacity: 25 kW (33.99 HP), In good condition, CO2 installation & cold room built in 2021. Cold room temperature of +-4°C and an evaporating temperature of -8°C. The installation includes the following: One cold room storage with a panel thickness of 100 mm and an isolation value of RC 5,21. Further, the cold room has an electrical slide door and 3 Bachara MGS 450/CO2 gas detectors. One for on the machine set and two for in the cold room. Cold room temperature is +-4°C. Dimensions internal: 24.800x7.800x2.900 mm (LxWxH) Dimensions external: 25.000x8.000x3.100 mm (LxWxH) Dimensions slide door: 2500x2500 mm (WxH) Cold room surface: 194 m² Cold room volume: 600 m³ Advansor MiniBooster 2x1 unit complete with a Bitzer 2HSL-3K-40S & Bitzer 4KTE-10K-40S (x2) semi-hermetic reciprocating compressors, Klimal RCO 273.108.53.80+WT 17.19 liquid collector, 2 Danfoss VLT drives and a Danfoss MMI control display. Dimensions: 1000x800x2200 mm (LxWxH) & weight: 820 kg. Fodsrz R Aropfx Alqsgb Delta FMT-7028 (x4) evaporators with a capacity of 6,3 kW. Each evaporator has 2 fans that have a diameter of 350 mm and an airflow of 3.000 m³/h. Dimensions: 1370x470x465 mm (LxWxH). Eco KCE62M6V.4314 gas cooler with 2 EBM-Papst A3G630-AR85-90 fans - 50/60 Hz - 0,97 kW - 1140 RPM - diameter 630 mm. The gas cooler has a capacity of 50 kW. Weight: 250 kg. Please feel free to contact us for more information and additional pictures!

Condition: used, Year of construction: 2017, functionality: fully functional, Type: Ruhle SR2 Bi Turbo with Elevator Loading sections (L x W x H): 500x120x200 mm Cutting length: 1,0 – 30,0 mm Saw blades 4 sets: 6 x 6mm 8 x 8mm 10 x 10mm Fgodoxpf Upopfx Alqjb 23 x 23mm Capacity: up to 3500 kg/hour Electric power: 5.3 kW (1555 x 1575 x 1470) mm (LxWxH) Weight: 695kg

Condition: excellent (used), 771 USED WP cold proofer for approx. 20 trolleys 58x78. The device is operational, after inspection. EXTERNAL DIMENSIONS (in cm): - width 378 - length 390 - height 286 + 45 (electrics) INTERNAL DIMENSIONS (in cm): - width 340 - length 350 - height 199 Fgjdpfx Aletbwfpsqjb The device is available to verify in our warehouse (36-068 Bachórz, Poland). Paid options available: renovation / transport / assembly / commissioning of the device. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, cooling capacity: 180 kW (244.73 HP), type of input current: three-phase, type of cooling: water, overall weight: 950 kg, input voltage: 400 V, total width: 800 mm, total length: 1,250 mm, total height: 1,680 mm, warranty duration: 6 months, Watercooled chiller York YCSE0181 180 kW Cooling capacity: 180 kW / 51.18 tons (12/7 — 35°C) Year of manufacture: 2016 Refrigerant circuit: 1 pcs. Heat exchanger: Plate Compressors: 1 pcs. Hitachi G50ASF-Z (screw) Type of refrigerant: R134A Dimensions: 1.25x0.8x1.68 m. Weight: 950 kg. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS Fodpfx Alswnrk Reqjgb The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2024, NEW Grundfos - The pump is fitted with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status: Fsdpfx Aeyug Hxjlqjgb "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights) "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights) "Alarm": Motor has stopped (flashing red indicator lights). Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box has a number of inputs and outputs enabling the motor to be used in advanced applications where many inputs and outputs are required: • two dedicated digital inputs • three analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 – 3.5 V • 5 V voltage supply to potentiometer and sensor • one analog output, 0-10 V, 0(4)-20 mA • two configurable digital inputs or open-collector outputs • two Pt100/Pt1000 inputs • LiqTec, dry-running protection sensor input • Grundfos Digital Sensor input and output • 24 V voltage supply for sensors • two signal-relay outputs (potential-free contacts) • GENIbus connection • interface for Grundfos CIM fieldbus module.

Condition: excellent (used), Year of construction: 2016, Evaporators SS/AL (Sequential Defrost) / number of coils: 3 Fodpfox H Sacex Alqegb from M7 freezing tunnel Refrigerant: CO2 Unit name: 3xGCO K/16/16/.../2920/G/V/V/3 Unit serial number: 404429274/32.01317 Volume (V): 284,9 l Year of manufacture: 2016

Year of construction: 2017, operating hours: 5,000 h, condition: ready for operation (used), functionality: fully functional, Three Geneglace machines installed in one insulated container with ice-collector screw bellow allowing ice for direct drop into ice-bin or to a rotary valve that blows the ice to location (up to 60 meter). The icemachines are connected to a Bitzer screw compressor unit in a pumpsystem using a horisontal liquid separator. The system has a air-cooled condenser in cascade with a schell&tube condenser. If used for leisure snow machine, this is a 100% mobile unit and makes 100m3 meter of dry sub-cooled ice pr. day Machiner is for Freon only, like R449a or R404a or similar. Fgsdpfx Alsw R Da Ueqeb