Füller Vacuum 60 Stellen Bertolaso

Bertolaso

Condition: used, Year of construction: 2013, machine/vehicle number: LC634, Used BERTOLASO Epica filling line for spirits, glass & PET - 12000 bphTechnical Specifications & Performance DataThis complete used bottling line is centered on a Bertolaso Epica 32/32/8 rinsing, filling, and capping monoblock. Designed for mixed container handling, it supports both flask-shaped and round bottles in Glass and PET. The line operates up to 200 bpm (approximately 12,000 bph depending on format) and is equipped with a wet glue labeling system for front and back labels. Components span key packaging stages from depalletizing through case packing and sealing, with integrated print and inspection.Production speed: up to 200 bpm (format-dependent)Filling type: Vacuum fillingBottle formats: Compatible with 0.1L, 0.2L, 0.3L, 0.375L, 0.5L bottlesContainers: Designed for PET and Glass bottle handling; flask and round shapesCore monoblock: Bertolaso Epica 32/32/8 (rinsing/filling/capping)Labeling: Wet glue, front and back application (Cavagnino & Gatti C4810)Inspection: Fill level check (Logilevel plus)End-of-line: Case packer, case sealer, case coder, spiral elevatorsElectrical supply: 415 V / 50 Hz primary (with 240 V / 50 Hz devices where indicated)Key models/years: 1994–2022 across sub-systemsAdvanced Automation & Control SystemsThe line integrates automated handling and quality control to ensure consistent beverage production. The Bertolaso monoblock provides synchronized rinsing, filling, and capping with centralized controls for format management. The Logilevel plus inspection system supports automated fill-level verification to maintain product quality. Conveyors, case handling equipment, and the labeling station operate with coordinated start/stop logic, enabling smooth, continuous flow across the production line. Electrical architecture is standardized around 415 V / 50 Hz, with auxiliary devices at 240 V / 50 Hz, facilitating straightforward integration with typical industrial power systems. Operator access points and changeover settings are designed to support efficient adjustments between formats.Production Line Integration CapabilitiesThis second hand industrial packaging solution offers full in-line operation from bottle depalletizing to finished case handling. It is configured for both PET and Glass containers, including flask-shaped and round bottles, and is suitable for multiple small bottle formats from 0.1L to 0.5L. Integrated conveyors connect every module, while the case erector, case packer, sealer, and printing functions ensure complete end-of-line packaging. The wet glue labeller supports dual-panel (front/back) applications to meet brand presentation requirements. The Spiralveyor equipment assists with elevation changes and compact layouts.Machine Condition & Maintenance HistoryThis used bottling line comprises components manufactured between 1994 and 2022, with the core filling monoblock from 2013 and subsequent upgrades at inspection (2017) and end-of-line elevation (2022). The balanced mix of modern and proven machinery delivers reliable performance for beverage pr.. Pgodpoy Szcwsfx Amyep

Condition: used, Year of construction: 2012, Overview The Krones, Gera, Joha, Markl, Miho filling line for returnable glass bottles was previously used to fill beer in a brewery in southern Germany. Technical Specifications - Output: 7,800 bph - Producs: Beer and CSD - Formats: - NRW 0.5 l - 0.33 l ring neck - 0.25 l LN Machine List  - Machine type: Decrater - Manufacturer: BMS - Year of manufacture: 2012 - Machine type: Decapper (Screw Cap) - Manufacturer: Rink - Decapping in the crate Euro 0,5l in 4x5 crate - Year of manufacture: 2012 - Machine type: Bottle washer - Manufacturer: Gera - Year of manufacture: 2024 - Machine type: Empty bottle inspector - Manufacturer: Krones - Model: Smarttronic - Incl. Pusher - Year of manufacture: 2012 - Machine type: Filler - Manufacturer: Kosme - Model: Isofill G 28/960 - 28 Valves - Year of manufacture: 2012 - With Combi Capper 4 heads(Crown Cork and Screw Cap) - Capacity: - 7,800 bph - Machine type: Labeling machine - Manufacturer: Krones - Model: Robusta - Refurbished in 2012 - 10 Bottle plates - 2 Label stations with 4 grippers and 4 glue pallets - Inkjet printer - Machine type: Crater Podpfoyb Sbujx Amyogp - Manufacturer: BMS - Year of manufacture: 2012 - Crate format: Modul Crate 4x5

Condition: used, Year of construction: 1991, machine/vehicle number: R58, Used isobaric filler Machine Bertolaso 11000 bph year of the remark of isobaric filler 2021 suitable for bottling sparkling and semi-sparkling wines entrance on the left completely overhauled isobaric filler in all its parts with original Bertolaso spare parts (documentable) bottle sizes 85, 88, 90, 112 6 sets of channels with isobaric filler to make the levels the electrical panel of the Used Isobaric Filling Machine according to CE standards use and maintenance manual, spare parts manual available for this isobaric filler the production speed of isobaric filler is 9000 BPH with the sparkling wine the production speed is 7000 BPH with spumante. Pgedpovguv Usfx Amyjp This isobaric filler is immediately available and delivered in case of purchase. We can assist the buyer in each step of the commissioning and testing operation of the Used Isobaric Filling Machine. How to build one isobaric triblock: The isobaric filler can be connected either to an automatic rinsing machine or to one or more cappers. We have 40 Bertolaso SBR grippers and two series of Bertolaso mushroom and satin cappers. One has 6 heads and reaches 9.000b / h, and one has 10 heads and reaches 14.000 BPH We can introduce all the machines in a sterile clean room with a filtration system. You can have the performance of an isobaric triblock with a Used Isobaric Filling Machine for natural cork and mushroom. Productivity can be from 11,000 to 14,000 BPH. It is possible to foresee a periodic maintenance program for isobaric filler to always have excellent efficiency. This involves both having spare parts in stock and foreseeing machine stops for a week/10 days. In case of purchase of the isobaric filler triblock, at least 9.00 meters by 2.50 meters, H 4.00 meters are required. The creation of a clean room guarantees the absence of contamination in the bottling phase.

Condition: used, Year of construction: 2022, Overview The rotary filling and capping machine manufactured by Bertolaso in 2022 is currently used for vinegar production. It features 30 filling valves and 4 capping stations and operates based on the atmospheric filling principle. The machine can be used with a wide range of shape-stable containers and is suitable for filling low-viscosity, non-carbonated liquids. Technical details:  Filler: 30 valves (Ø16 mm), model Olimpia 30/1050 Capper: 4 Pick & Place heads, model Sigma P&P 4/350 Bottles: 600 ml & 1000 ml cylindrical (range Ø55–95 mm, H160–360 mm) Caps: Pre-threaded plastic Output: 8,000 bph (600 ml) / 6,000 bph (1000 ml) Material: All product-contact parts in AISI 316 stainless steel Bowl: Electrically height-adjustable, mechanical float level control Features: - Automatic valve opening/closing - Centralized fill-level adjustment (±50 mm) - Maintenance-free lifting cylinders - Automated lubrication system - Integrated washing/CIP system - Remote teleservice via Ethernet Safety: CE compliant, transparent guards with microswitches Pjdpfxexqz D As Amyogp Includes: Format parts for 600 & 1000 ml bottles; adjustable star wheels (+/- Ø55-95mm)  

Condition: used, Reusable bottle line for filling beverages into 0.5 l and 0.33 l glass bottles. The filling line comprises the following components: - Uncorker (Rink, 1995) with 2 uncorking heads - Unpacker (Albert Frey) with 2 unpacking heads - Crate washer (Göbel, 1971) for cleaning using spray nozzles - Bottle washing machine (GM Gera, 2007), single-end machine - Empty bottle inspector (Krones, 2016) for checking the base, side walls, neck and residual liquid - Glass bottle filler and capper (Krones), short-tube counter-pressure filler with 40 filling valves and capper for crown caps - Labelling machine (Krones, 1995) for wet glue labelling - Date coding (Domino, approx. 2010 – 2017), inkjet printer - Fill level, label and cap inspector (Syscona, 1997 – 2008) - Packer (Albert Frey, 2002) with two packing heads - Palletising system (ABB, 2014) with articulated arm robot - Conveyor belt systems for bottles and crates Pgjdjzhl Hpopfx Amysp Additional title: Reusable bottles; manufactured between approx. 1971 and 2016 Nominal capacity appr.: 12000 Fl/h Formats: 0.5 l Euro and NRW, 0.33 l Giesinger; crown caps Features: Uncorker; Unpacker; Crate washer; Bottle washing machine; Empty bottle inspector; Filler and capper; Labelling machine; Date coding; Fill level/label/cap inspector; Packer; Palletising system

Condition: used, Year of construction: 2000, Overview  This solo cork capper was manufactured in 2000 by Italian company BERTOLASO. The machine was used for capping glass bottles with corks in a cider production line and is immediately available. Production at the original facility ceased in 2022. Podpfx Aswhwvljmyjgp Technical data  - Capacity: From 9,000 bph to 12,000 bph - Formats: 75 cl glass bottles - Application: Cork caps for cider bottles Scope of Delivery - BERTOLASO DELTA 512 S solo capper

Condition: good (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 336.067, 3-head glass bottle capping machine Pgodpfow R Tvxex Amysp

Condition: used, Year of construction: 2013, Used Wrap Around SGE year 2013 – 3000 boxes/hour General Technical Description The Used Wrap Around SGE year 2013 – 3000 boxes/hour delivers high-efficiency carton packaging for PET and glass containers. S.G.E. manufactured this machine in 2013, and since then, it has served as a reliable solution for secondary packaging in bottling lines. Not only does the structure support demanding industrial use, but it also ensures consistent and repeatable operation. Furthermore, the machine integrates seamlessly into most bottling layouts. Importantly, the Used Wrap Around SGE year 2013 – 3000 boxes/hour reaches this output capacity thanks to the integration of a divider insertion system, which places cardboard dividers (commonly known as alveare) between bottles. This feature stabilizes the packs during carton folding and gluing operations, and ensures safe handling, especially in multi-row configurations. The machine is configured to work with bottles of 0.75 L and supports multiple carton formats, including 3×2, 3×4, and 3×6. This format versatility enhances its adaptability across a wide range of packaging needs. Configuration and Performance of this Used Wrap Around SGE The Used Wrap Around SGE year 2013 processes up to 3000 cartons per hour, both in the 3×2 and 3×4 formats. Consequently, the 3×2 configuration yields 18,000 bottles per hour, while the 3×4 configuration handles 36,000 bottles per hour. The 3×6 configuration further extends the machine’s capacity, allowing even higher bottle output depending on the production layout. The machine uses a straight-line infeed system that guides bottles into the carton blank positioning area. Once the bottles are in place, the system folds a flat carton blank around them and seals it using hot-melt glue. The entire process—forming, folding, and gluing—is mechanically synchronized to ensure high packaging precision. Moreover, the modular design allows for fast format changes and simplified maintenance. Above all, the machine maintains stable output even during peak production. Electrical and Mechanical Specifications Podpfxewbgzds Amysgp The machine operates on 400 Volts, 50 Hertz, and draws a maximum of 42 kW. This power supports key functions such as motorized feeding, carton forming, and gluing. Additionally, S.G.E. designed the wrap around with rugged components, which resist wear and ensure long-term reliability. In fact, engineers can easily access all mechanical areas, simplifying maintenance and diagnostics. For this reason, the machine suits production environments that require both uptime and durability. Safety and Operational Condition S.G.E. equipped this Used Wrap Around with a complete set of safety devices. Therefore, the machine complies fully with European safety regulations for operator protection. At present, it remains in storage; however, all its main systems are preserved under controlled environmental conditions.

Condition: used, Year of construction: 1991, Used capping machine BERTOLASO Aluminium screw up to 1200 bph The Bertolaso aluminium capper clearly meets the needs of bottling with aluminum caps. Moreover, technicians overhauled this model in 2008 and adapted it for Stelvin capping, thereby ensuring reliability and versatility. Technical specifications Pgodpfxevgva Ij Amyop The machine effectively uses one capping head to operate with aluminum screw caps. Furthermore, the system performs a clockwise rotational movement to ensure a uniform and precise capping process. Consequently, it processes 1200 bottles per hour, making it an ideal solution for small and medium productions. The compact dimensions of the machine, measuring 1200 mm in length, 900 mm in width, and 1200 mm in height, therefore enable easy integration into existing production lines. Additionally, its weight of 0 kg provides a stable and durable structure suitable for intensive use. Safety and maintenance Integrated safety features undoubtedly protect operators during use. Thus, these systems keep the machine compliant with modern industrial safety standards. Besides, the modular design and availability of original Bertolaso components simplify regular maintenance. Efficiency and adaptability This machine, ready for use, optimizes production times while maintaining a high level of capping precision. Moreover, the adaptation for Stelvin caps satisfies current market demands and, as a result, offers greater flexibility compared to the original model. Applications The Bertolaso screw capping machine efficiently serves various industrial sectors, including wine, food, and beverage industries. Consequently, its versatility and high performance provide an optimal choice for companies requiring a reliable and efficient machine for aluminum cap closures. Conclusion The VB 40 V 22 model delivers robustness, efficiency, and safety. Furthermore, it caps 1200 bottles per hour and adapts for Stelvin capping, thus making it a highly competitive solution for companies of various sizes. Consequently, Bertolaso reliability and compliance with safety standards make this machine a valuable investment in the bottling sector.

Condition: used, Year of construction: 1983, Used Capping Machine BERTOLASO up to 4500 bph Technical Analysis of the BERTOLASO Capping Machine The BERTOLASO SIGMA 103 model exemplifies capping technology that significantly enhances high-speed bottling processes. Originally designed in 1983, this machine delivers a production capacity of up to 4500 bottles per hour (bph), thus showcasing its effectiveness in intensive industrial settings. Importantly, its long operational life and minimal maintenance requirements solidify its market value among used capping machines. Operational Details and Functionality Equipped with three capping heads, the SIGMA 103 allows for precise application of plastic press-on caps. Furthermore, its clockwise rotation direction facilitates seamless interactions with bottling line components, consequently promoting a continuous and uninterrupted workflow. This specification not only boosts productivity but also critically minimizes the risk of operational errors, which is essential in environments that demand speed and precision. Electrical Parameters and Maintenance Considerations Podpfx Aovgvppsmyegp Operating at a voltage of 380 V and a frequency of 50 Hz, the machine’s electrical setup matches typical European industrial operations. Currently stored in a warehouse, it must undergo a detailed inspection to verify the integrity of its electrical and mechanical components. Additionally, this step is critical to ensuring the machine can resume production without compromising the quality of the capping process. Conclusions In conclusion, the BERTOLASO SIGMA 103 capping machine stands as a high-value technological resource for the bottling industry. With its high production capacity and efficient capping heads, it is ideally suited for integration into a modern bottling line, ensuring high performance and cost-effective operations. Moreover, this analysis emphasizes the necessity of thoroughly assessing the machine’s operational conditions before deployment to maximize efficiency and extend its lifespan.

Condition: used, Year of construction: 2000, Used Capping Machine BERTOLASO plastic T stopper up to 7000 bph This capping machine not only delivers high performance in the bottling sector but also ensures efficiency. The Bertolaso 5T model processes about 7000 bottles per hour (BPH), which makes it ideal for medium to high-capacity bottling lines. It features 5 capping heads, allowing it to apply plastic mushroom stoppers, also known as T stoppers, that are commonly used in wine and other alcoholic beverages. Technical Features of the Capper BERTOLASO 5T Podjvgviijpfx Amyjgp Bertolaso designed the 5T model with a robust structure that therefore ensures long-term durability and resistance to wear and external elements. The machine’s mobile capping heads provide flexibility during the capping process, so it adapts to different cap formats. Bottles enter from the left side, and the machine rotates clockwise, in accordance with industry standards. Moreover, the vibrating cap feeder ensures a continuous and smooth supply of caps to the production line. Safety and Compliance The capper Bertolaso includes safety guards that comply with current occupational safety regulations. These guards thus ensure maximum safety for operators, reducing the risk of accidents. In addition, the design of the guards allows easy access to the machine without interfering with its regular operation, making maintenance tasks more efficient. Performance and Flexibility The Used Capping Machine BERTOLASO plastic T stopper up to 7000 bph handles up to two formats of cylindrical bottles. Consequently, this flexibility allows production lines to adapt to various requirements without long downtimes for reconfiguration. Operators can adjust production speed through a variable speed drive, thereby aligning the machine’s output with specific production needs. As a result, the machine provides tailored performance based on your specific requirements. Current Status and Sales Conditions The machine is currently stored and ready for inspection and reinstallation. Furthermore, we will supply the machine with an existing cylindrical bottle format and cap installed on the capping machine. This means that the setup simplifies installation and startup, enabling quick integration into your production line. The machine operates on a 380 V and 50 Hz electrical system, which makes it fully compatible with European industrial standards. Hence, you can integrate it seamlessly into your production setup. Conclusion of the Capper BERTOLASO 5T Overall, the Used Capping Machine BERTOLASO plastic T stopper up to 7000 bph offers an efficient, versatile solution for bottling lines requiring reliable, high-speed production. Additionally, its technical features, format flexibility, and safety guards make it an excellent choice for those seeking a high-quality capping machine. Thus, by choosing this model, you ensure both performance and safety. In short, it is a top-tier machine that will enhance your production line’s efficiency.

Condition: used, Year of construction: 2011, Used Capping Machine BERTOLASO Delta 812R cap orienter CAMES and hood ALTIFILTER General Overview of the Capping Machine Bertolaso The Bertolaso Delta 812R capping machine delivers high-quality performance for efficient and precise bottling. Specifically, this 2011 model features 12 heads that cap corks, handling up to approximately 15,000 bottles per hour. Therefore, the Capping Machine Bertolaso consistently provides high performance and reliability. Components and Accessories Moreover, the Bertolaso Delta 812R capping machine includes a Cames cap feeder and an AltiFilter air flow hood. Consequently, the Cames cap feeder manages the caps with precision and continuous flow, thereby optimizing the bottling process. In addition, the AltiFilter hood maintains a contamination-free work environment with its advanced air filtration system, which in turn improves the quality of the final product. Configuration and Versatility Furthermore, the adjustable stars on this capper enable configuration for various bottle sizes and shapes. Although the machine has primarily capped Bordeaux bottles, users can easily adjust it for other applications in the future. As a result, this flexibility allows companies to expand their product range effectively. Maintenance and Spare Parts In addition, the capper comes with a set of spare parts, ensuring ongoing maintenance and reducing downtime. Consequently, the availability of these spare parts helps maintain high production standards and extends the machine’s lifespan. Therefore, this feature minimizes downtime and ensures consistent operation. Conclusion of the capping machine Bertolaso Pgedpfovgvk Hsx Amyep In summary, the Capping Machine Bertolaso, with its Cames cap orienter and AltiFilter hood, offers a high-quality solution for the bottling industry. Given its high operational speed, precise cap placement, and additional components, it represents an excellent choice for those seeking a used yet highly efficient machine. Additionally, its adaptability and the availability of spare parts add significant value to any bottling plant.

Condition: used, Year of construction: 1997, Used Filling Machine Bertolaso Olimpia 12 Valves for still wine – 2500 bph 12 valve filler for still wine capable of reaching a speed of 2500 BPH. Podpfxevguxpe Amyogp It has safety features and also all manuals. Direction of rotation anticlockwise. This used filler from 1997 works with three bottle formats, namely: 0.375 L; 0.75 L; 1.5 L. The number of nozzles of this machine is 12 and they are fixed.