Spray booth with supply air ceiling

Berkmann

Condition: used, Year of construction: 1996, Used machine Year of manufacture: 1996 Features and technical data: - Berkmann extraction systems operate on the principle of displacement flow, meaning that a negative pressure is created on the wall side of the room, while an overpressure is generated on the opposite side by the supply air unit. - Almost the entire room air flows in a directed and low-turbulence manner from the supply air side toward the exhaust air side. - Paint mist generated within the flow area is captured and discharged. - With Berkmann extraction systems, air is extracted across the entire area, not just in the collection zone in front of the spray wall as with conventional systems. - This allows larger components to be painted as well. - It is also not necessary to work directly in front of the extraction unit. - The patented 'gap extraction' enables high extraction velocities at all sides (including at floor level, where solvents accumulate). - Due to the special arrangement, extremely large filter surfaces could be accommodated, resulting in very long filter service lives. - Compared to traditional spray booths, Berkmann extraction systems operate with significantly lower air volumes, enabling energy savings of up to 50%. - Includes paint mist extraction unit BASIC 7000 m³/h - With supply air unit - With solvent evaporation unit - System is installed underground with grating cover - Dimensions of grating approximately 3,500 x 3,400 mm - Filter area of the unit: approx. 3.7 m² - Supply air unit approx. 82 kW, type 3072 FL/WW (two-stage) Nwedpfsxwz H Rjx Ahvsc - Solvent evaporation unit approx. 3,000 m³/h exhaust air volume - Motor 1.1 kW - With supply air duct system featuring 4 large-area filter ceilings with explosion-proof lights - With control cabinet featuring microprocessor control - With used Kremlin paint application unit Price excludes dismantling, removal, and collection on site Availability: approx. mid-April 2026 Location: Hesse

Condition: used, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm control Weinig, PC-Nexus # 2764 Weinig Unicontrol 6 with NC spindles ----- Machine will be cleaned and completely checked before delivery Technical data summary (please enquire about any additional accessories included) Item 1: Cross-cut saw ----- > Electronic cross-cut saw, infinitely adjustable horizontally > Number of tools: 1 piece > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser aiming light for detecting the saw section > NC length stop, mounted on slot table included Positioning of the cross-cut saw integrated in the control system. > Length 3500 mm Item 2: tenoning spindle ----- > Number of tools: variable, infinitely variable adjustment NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely variable adjustment 254 mm NC axis > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Item 3: 1st profiling spindle (synchronous spindle and counter-rotation) > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Max. tool flight circle: 232 mm > Motor power: 7.5 kW Item 4: 2nd profiling spindle ----- > Position: vertical right > Number of tools: variable, infinitely variable adjustment NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely variable adjustment 254 mm NC axis > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions Rung guide consisting of: Guide ruler in the stop (area of ??synchronous spindle), Rung support bar from above in the area of ??profile milling unit vertical right and profiling spindle. Pos. 5: Profile milling unit horizontal top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed ??5,850 rpm > Tool flight circle max. 130 mm > Axial adjustment range 30 mm, 8 positions using pneumatic turret > Radial adjustment range 125 mm, 8 positions using pneumatic turret Pos. 6: 3rd profiling spindle (fitting spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range 115 mm, 8 positions using pneumatic turret > Radial adjustment range 100 mm, 8 positions using pneumatic turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool flight circle: 210 mm > Motor power: 3.0 kW Other features ----- > online-capable > rebating device for tear-free rebating > double parts package > return conveyor for 1-man operation: tilting belt > screen control > inclined window device Nwodjvu Hfqepfx Ahvsc > electronic angle display for inclined windows > industrial PC, PC control/NEXUS > Weinig type production program > without processing tools No original images available yet. Images show identical machines from our archive. ----- Price of the above-mentioned machine upon request! ----- Optional with additional charge: EUR 6.500,00 Note on used tools: We currently ha...

Condition: good (used), Year of construction: 2007, Technical characteristics : - Max machinable length 3200 mm - Minimum machinable length 200 mm - Maximum width 200 mm - Minimum width 40 mm - Maximum workpiece height 130 mm - Depth with max Ø to tenon 320 mm: 105 mm - Tenoning carriage speed min / max 0/100 m / min - Min / max profiling speed: 3/15 m / min Tenoning: 1- end cut saw 5.5 hp (4 kW) Saw Ø 400 mm 2- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard 3- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Nwsdpfot R T Hcox Ahvec Automatic splinter guard Vertical positioning with continuous axis 4- Digital angular adjustment clamp Profiling: 5-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tools 130/240 mm Axle stroke 280 mm Time-delayed anti-shattering intervention during calibration Double direction of rotation Vertical and horizontal positioning with continuous axis 6-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Axle stroke 280 mm Vertical and horizontal positioning with continuous axis 7-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Vertical and horizontal positioning with continuous axis 8-: close-out recovery group Vertical and horizontal positioning with continuous axis Device for extracting the shutter 9-: lower horizontal shaft for groove Vertical and horizontal positioning with continuous axis 88.5 hp (66.4kW) 10-: digital guide 11-: Return of parts to the operator NO TOOLS AVAILABLE OBTAIN ADDITIONAL PHOTOS NOTE: SUBJECT TO CHANGES IN TECHNICAL DATA

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 5,850 mm, total length: 12,125 mm, total width: 5,150 mm, overall weight: 8,000 kg, warranty duration: 12 months, inner dimension height: 5,000 mm, inner dimension length: 12,000 mm, inner dimension width: 5,000 mm, Equipment: cabin, lighting, PAINT BOOTH 12x5x5M EZ Series Model: - LED ceiling lighting - LED side lighting - RIELLO oil burner - Four fans, including: ‎ ㅤ- 2x supply fans ‎ ㅤ- 2x exhaust fans Njdpfx Aexm U Exehvswc TECHNICAL PARAMETERS: - External dimensions: 12125x5150x5850 mm - Internal dimensions: 12000x5000x5000 mm - Entrance doors: 4000x4800 mm (2 units, four leaves, reinforced hinges) - An additional BOX 1650 mm x 8000 mm should be included in dimensions – can be placed on either the right or left side. - Structure: galvanized steel frame - Heat exchanger: high-grade stainless steel - Panels: filled with mineral wool insulation - Drive-on ramps – 2 units - Fully grated floor The reinforced frame construction prevents vibration and the air surge effect from the main supply duct. Double Roof Design: - Upper outer layer - Inner truss structure with V600 ceiling filter Air Circulation System: - Supply system: Jet turbine 7.5 kW – 2 units - Exhaust system: Jet turbine 7.5 kW – 2 units Air Filtration System: - Pre-filter collects particles larger than 10 μm - Ceiling filter collects particles larger than 5 μm - Floor filter: Paint Stop - Carbon filter Lighting: - Ceiling lights: 52 LED tubes (14 angled fixtures with 4 tubes each) - Side lighting: 26 LED panels integrated into the right, left, and rear walls Burner: Riello – 2 units, oil model 40 G20, approx. 200,000 Kcal/h - Heat exchanger: high-quality stainless steel - Heating time: 8–15 min (max. 80°C) Optional Features: - Roof-mounted boxes - Insulated roof - Pass-through doors - Water curtain - Color according to RAL palette - Explosion-proof (EX) version available

Condition: ready for operation (used), For sale: conveyor belt as seen in the photos, approximately 7.5 m long. Belt width 0.3 m. Possibility of transport. Nedpfx Ahsr Nvx Uovjwc

Year of construction: 1994, condition: good (used), Rivo gang wheel sharpening machine Nodpfjpl D Hxsx Ahvewc Tyop GA 250

Condition: excellent (used), Gold anodized panels Working dimensions 2.5 x 1.1 m Electric heating Nwedpfou I N D Hex Ahvjc Fully functional, tested You can call or write to us. We speak and write German and Russian. You can also send messages in English. 31.3.5

Condition: new, Year of construction: 2025, RETRACTABLE LIQUID SPRAY BOOTH Njdpfsvxfkasx Ahvewc Retractable spray booths are designed for manual painting application with side draft ventilation, for extraction of applied liquid paint overspray. The benefit of the retractable liquid spray booths is that saves space in the workshop. STRUCTURE It is manufactured from scissor system body, made of electro galvanized rectangular and circular tube structures and covered by PVC fabric material from outside. Moving system includes industrial wheels or rail & wheel system, recommended according to outdoor or indoor use and spray booth length. A curtain door is designed for closing the door during the painting application. VENTILATION SYSTEM Side draft ventilation provides high efficiency during painting application. The filter wall is manufactured modular from galvanized sheet metal, designed with shelves and emergency door at the two sides. Extraction fan is placed at the top of the filter wall, its electrical motor is placed out of the fan channel and there is no direct contact of the motor with the contaminated air in order to avoid the risk of spark. FILTRATION SYSTEM Extraction filter is used as 2 stages with 99,9% efficiency, placed at the side of the spray booth filter wall. There is a pre-filter at the door curtain that maintains natural airflow inlet during extraction fan is operating. Warning lamp at the control panel indicates service need when the filters get contaminated. Made in Türkiye CE Mark We offer the best technical solutions and competitive prices * Office in France and Germany, Contact us for more information and quotations

Condition: used, machine/vehicle number: 12625, Rotor diameter: 800 mm Rotor width: 1500 mm 6-knife rotor 4 rows stator knives Nwjdsk Rfvkspfx Ahvsc Inlet cross section approx. 820 x 1500 mm Drive motor: 160 kW

Condition: excellent (used), HA 4 surface planer planing width 450 mm total table length 2500 mm Feed table 1500 mm Machine height 820 mm Max. Chip thickness 15 mm Nwodpfx Asinkfnohvec Cutter shaft revolutions 4800 rpm Motor power 4 HP Weight 660 kg 3-piece cutterhead