Scales BERKEL XTs 420 2 pieces

Berkel XTs 420

Condition: used, Year of construction: 1992, closing pressure 600 kN clamping plate 460x460 mm distance between columns 300x300 mm weight of the machine ca. 4,5 t lock stroke 230 mm capacity of ejector 40 kN ejector stroke 70 mm Ksdpfx Asfrvzveh Noll height of form 120-350 mm column diameter 56 mm casting capacity 55 kN casting plunger stroke 130 m/m injection plunger diameter 45,50,55 mm casting volume (DIN 24480) 76,121,165 cm 2 volume cast pressure 345,280,231 kp/cm² casting area 174,214,260 cm 2 Traverse Stroke 150 m/m Used Die Casting machine DAW 50 with SBC 2 control for the use of zinc alloys. Available from used machine stock. The machine is equipped with an electric furnace from Rauch Typ MO50E and used pneumatic sprayer 401. Recommendation from the manufacturer is some repair / general overhaul in the overhaul plant. It can be carried out in the scope of agreement.

Condition: new, Year of construction: 2026, Cut-to-length and mitre saw type: ZS 200 N - 5 KW motor with machine stand, Machine via handwheel and worm gear (rear) Tiltable Saw blade diameter 520 mm, saw blade mounting hole 50 mm Saw blade speed: 2800 rpm 400 volt / 5 KW (S6/40%) motor with brake and automat. Star delta motor control Cutting width at 90 degrees: 420 mm Cutting width at 45 degrees: swiveled: 295 mm Cutting height at 90 degrees: 200 mm Cutting height at 45 degrees inclined: 140 mm Saw can be swiveled on one side up to approx. 25 degrees to an acute angle and tilted flat to the left up to 30 degrees Klsdpek H Ic Uefx Ah Nsl Carbide circular saw blade 520x4.0/2.8 x 50 mm 60 WZ neg. for wood RLH-ST60 6.0 mtr. measuring length, mounting side: left Cross-cut fence / roller conveyor, heavy-duty design, Stop slide adjustable from the workstation via handwheel, electronic-digital dimension display, pneumatic clamping of stop slider, stop flap folds backwards, with steel rollers 60 mm diameter, roller spacing 200 mm, 400 mm roller width, with 4 support feet and connection piece: overall length: 6.7 mtr. Surcharge for digital electronic display unit type: FIAMA EP6 for 230 V mains operation, with electric on/off switch and socket. Powerful dark red LED display. Higher accuracy than the battery-powered crystal display RO-ST60 4.0 m long feed roller conveyor Mounting side: Right Heavy-duty design, steel rollers: 60 mm Diameter, roller spacing: 200 mm 400 mm roller width, 3 support feet and connection piece Location: From stock 54634 Bitburg - immediately available - Picture: similar. Machine is still in original packaging

Year of construction: 2023, condition: new, Fully automatic horizontal stretchfilmwraping machine with air bubble film unit SPINNER 1000s Application: Packaging, grouping and protection of long or bulky products like furniture, doors, timber boards, etc. operator side: - in throughput direction right General machine features: - Main motor power: 1,5 kW - Max. ring rotation speed: 80 rpm - Min. ring rotation speed: 10 rpm - Electronic control components: Siemens , Schneider, LS - Total weight: 770 kg Standard Equipments; Klodpfjfuwg Iox Ah Nsl - Driven conveyors belt (infeed and outfeed) for automatic product feeding - Adjustable ring rotation speed - Adjustable stretchfilm tension with mechanical brake device - Automatic stretchfilm clamp and cutter system - Automatic film hooking system - Pneumatic front and back top presses to hold the product while wrapping - Photocell to start automatically the wrapping cycle - Touch screen to adjust machine parameters to the product needs - Operator safety systems Optional Equipments; - Different sized conveyors - Infeed and outfeed rollers - Air bubble film unit Technical features: Product to Wrap Sizes - Max. length: Unlimited - Min. length (WxHxL): 100x18x550 mm Conveyor belt’s features: - Useful length: 1924mm - Total length: 2000mm - Working height: 900mm - Electric motor power: 0,75 kW - Max. speed: 12 m/sec. - Max Load Capacity: 100kg/m Stretchfilm features: - Max. width: 200mm - Max. diameter: 230mm - Reel core diameter: 76mm - Recommended thickness: 23, 30, 35 micron

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: 2024/121/47, saw blade diameter: 420 mm, GRAULE cross-cut and mitre saw Type ZS 170 N (tiltable) 400 Volt three-phase brake motor 2.2 kW Saw blade diameter 420 mm Saw blade holder 40 mm Cutting height 170 mm, Saw blade tilted to 45°: cutting height 115 mm, cutting length 410 mm incl. the following accessories: 1 pc. Machine can be tilted by hand crank from the rear on both sides from 90° to the left by 45° and to the right by approx. 30° to approx. 60° 1 pc. Carbide circular saw blade 420x3.4/2.4x30 mm 48 WZ neg. for wood 1 pc. Machine stand Klodpetwz Tlsfx Ah Nel

Condition: new, Year of construction: 2025, Cutting height at 90°: 170 mm Ksdsizkhvopfx Ah Njll Cutting length: 430 mm miter range horizontal: 45°-90°-25° Miter range vertical: 60° - 90° - 30° Pivot adjustment with crank: yes roller conveyor / support table: yes Saw blade diameter: 420 mm Speed: 2800rpm Engine power: 3 kW Motor brake: yes Suction connection: 100mm Length roller conveyor: 2 x 1500 mm Machine length: 4000 mm Machine width: 1250 mm Machine height: 1550 mm Weight:

Condition: new, 04P-023-LF 04P-023-RF 004P014-L-A2 004P014-R-A2 004P023-LF-A2 004P023-RF-A2 04P033-LF-A2 04P033-RF-A2 044P-023-011LF 044P-023-011RF 044P049-021-LF-A2 044P049-021-RF-A2 044P049-033-LF-A2 Klodpfx Ahef Ddzqo Njl 044P049-033-RF-A2 06P-094-LF-A2 06P-094-RF-A2 064P-079-025-LF 064P-079-025-RF 064P118-017-LF-A2 064P118-017-RF-A2 064P135–049–L-M1268 064P135–049–R-M1268 064P-135-049-LF 064P-135-049-RF 064P-148-034-LF 064P-148-034-RF 066P079-L-A1-M1077 066P079-R-A1-M1077 066P094-L-A1 066P094-R-A1 066P-104-031-LF 066P-104-031-RF 066P-118-035-LF 066P-118-035-RF 066P104-056-LF-A1 066P104-056-RF-A1 066P135-L-A1-M1077 066P135-R-A1-M1077 644P 079-037-014-LF-A2 (M1239) 644P 079-037-014-RF-A2 (M1239) 066P135-063-L-A1, 066P135-063-R-A1 644P-069-026-014-LF-A2-M1239 644P-069-026-014-RF-A2-M1239 664P118-056-017-L-A2- M929 M1256 664P118-056-017-R-A2- M929 M1256 08P-197-LF 08P-197-RF 086P-197-056-LF 086P-197-056-RF 886P-226-226-104-LF 886P-226-226-104-RF and other types, as one package

Condition: new, The 40 MP is a single-head saw with top-down cutting action, featuring a saw blade diameter of ø 400 mm. Kodpfx Ahjrfapaj Njll Comparable to Emmegi, Elumatec, Pressta-Eisele, Mecal, Fom, etc. The saw table can be manually adjusted to an angle of +/- 45°. The saw head can be manually tilted from 0° to 45° outwards. The 40MP single-head saw is equipped with horizontal clamping cylinders for secure profile clamping, minimal spray lubrication, and mechanical protection of the sawing area. Please also see our used stock machines from Emmegi, Elumatec, Pressta Eisele, etc.

Condition: new, A dedicated machine for producing a straight trench / notch in a variety of timber products used in general joinery, garden furniture, shed, roof truss and timber frame manufacturing. Also can be used for door framing, notching of roof bearers and for log cabin manufacture.As standard the machine is fitted with horizontal pneumatic workpiece clamps and also a hydrocheck damper control to give a smooth stroke action to the cutterhead movement. Precision ball bearing movement on hardened steel runners. Sturdy cast iron construction with steel base stand. Kjdpfx Ahody Hm Dj Nsll 3kw motor. Max tool dia 250mm Bore of tool 40mm. Handwheel rise and fall of cutter motor arm. Max depth of trench / notch 60mm. Width of trench / notch 60mm - in one pass. Max. length of travel of tool 250mm. 2 x horizontal workpiece clamps. Hydrocheck damper to movement of cross cut arm. Dust extraction outlet 100mm. Machine stand

Condition: used, Year of construction: 1984, Vacuum filling machine, vacuum filler, sausage filling machine, dividing and twisting device -Handover: in its current condition as inspected -Process: Filling-Portioning-Twisting-Hanging Kljdpeb A Il Hjfx Ah Nol -Program control: -Turning gear: -Turning nozzle: Ø 10 x 400 mm -Dimensions: 3400/1000/H1500 mm -Weight: 860 kg

Condition: ready for operation (used), Year of construction: 1989, An aluminum die casting system is available. Clamping force: 2200kN, opening force: 71kN, max. opening stroke: 430mm, mold closure: double toggle lever, pressure chamber: cold chamber, position: horizontal. Filling piston diameter min./max.: 40mm/70mm, pressure chamber filling volume min./max.: 293cm³/898cm³, casting pressure: 1990bar, blast area min./max.: 110cm²/338cm², output: 780 cycles/h. Clamping plate dimensions X/Y: 755mm/755mm, column spacing: 500mm/500mm, mold height min./max.: 250mm/600mm, min. mold dimensions X/Y: 296mm/296mm. Including crucible furnace, blow-out device, automatic dosing unit and 4x control cabinets. Documentation available. Kljdpfx Aeucfwpoh Nol