5271 - BERGMANN PS 8100 L ROTO-COMPACTOR

Bergmann PS 8100-L

Condition: reconditioned (used), Year of construction: 2012, operating hours: 25,895 h, functionality: fully functional, pressing force: 78 t, filling opening width: 1,100 mm, filling opening length: 1,500 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 24,000 kg, oil tank capacity: 1,000 l, power: 55 kW (74.78 HP), volume flow: 930 m³/h, Technical data baler: Manufacturer Presona AB Typ LP 80 VHK 1 Year of construction 2012 Total machine operating hours 25,895 hours, as of July 2025 Pump operating hours, effective 14,135 hours, as of July 2025 Number of bales pressed 235,597 pieces, as of July 2025 Press power main press 78,5 tons Specific press capacity 95 N/cm² Press power of pre-press 28 tons Volume of pressing chamber 2,7 m³ Feed channel1,500 x 1,100 mm Theoretic throughput rate 930 m³/h Throughput rate under operating conditions 410 m³/h Bale size 750 x 1,100 mm Driving motor 55 kW Tying system 5 fold vertical, 3-fold horizontal, full automatic Throughput rate with a bulk density of 30 kg/m³ approx. 9 to 12 tonnes/hour, depending on material 50 kg/m³ approx. 14 to 17 tonnes/hour, depending on material 100 kg/m³ approx. 16 to 25 tonnes/hour, depending on material Throughput capacity with MSW (Municipal Solid Waste) approx. 20 to 27 tonnes/hour, depending on material Bale weight 450 up to 600 kg, depends on material and bale length Volume hydraulic oil tank 1,000 l Baler dimensions built up with hopper 10,985 x 3,750 x 4,310 mm (l x w x h) Transport dimensions only baler 10,985 x 2,300 x 2,900 mm (L x w x h) Machine weight baler approx. 24 tons Condition of the press: The machine was partially overhauled and serviced in our workshop and, once the work was complete, tested in manual and automatic mode during operation. The following overhaul work was carried out: Machine cleaned, partially derusted and partially repainted Hydraulic oil tank emptied and cleaned Oil filter and air filter replaced, new hydraulic oil filled Press ram dismantled and cleaned All four rollers removed from the press ram and replaced Wire station with deflection rollers for the lower wire cleaned and made operational Side guides removed from the press ram, smoothed, mounted and readjusted Main hydraulic cylinder dismantled and disassembled for inspection Piston rod replaced, cylinder tube honed Complete seal set replaced, pressure test carried out Vertical and horizontal needle system for binding dismantled, cleaned, wire deflection rollers made functional and serviced Chain cleaned, greased, chain tension readjusted Drillomat cleaned, wire knife, drill shafts and drill fingers checked, retightened with torque and serviced Door contact switch checked and partially replaced. Emergency stop switch checked. Complete electrical wiring checked and partially replaced. Bearings of the wire guide rollers under the press replaced. New safety grilles for vertical and horizontal binding manufactured and installed. Machine checked, general maintenance work carried out and press tested in manual and automatic mode Lhsdjvwlqqepfx Ad Nsb Scope of delivery: Only the baler will be sold. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: new, GENERAL Typical of the single-shaft shredders in the ZIS series are their voluminous grinding chambers, the stability of which is ensured by their welded steel construction. The rotor diameter is also generously dimensioned at 457 mm. The rotor widths are 1200, 1500 and 2000 mm. The ZIS series retains all the advantages of the ZSS series: drive via an oversized gearbox, reversible blades, screwed blade holders, robust, external bearings, hydraulic screen basket, easy handling and technically sophisticated control systems. APPLICATIONS The ZIS series was primarily developed for large-volume hollow bodies: IBCs, garbage cans, pallets, rain barrels, etc. The machine can also be used universally for countless applications in the plastics and wood industries. Like all Zerma shredders, the machines in the ZIS series can also be equipped with various wear options. Lhsdpeghgdvjfx Ad Nsb ADVANTAGES 35% larger grinding chamber volume compared to the ZSS series Internal hydraulic slide Increased slide speed in the return movement Compact dimensions Knife holders screwed into rotor pockets

Condition: as good as new (ex-display), functionality: fully functional, Very nice paper cutting machine. Model C780-M8. This paper cutting machine comes from a government agency and has seen very little use. Complete with all standard accessories and chrome table. This machine is 100% operational. Of course, you are welcome to test this machine with us. We can arrange transport/packaging for you and load it into a truck or container. Please request a price including transport (location: the Netherlands). Regards, Henk Hoos. Ledpfjw E I Eljx Ad Nehb

Condition: used, Year of construction: 1981, machine/vehicle number: 9, Anpapp-Presse und Falzeinbrennmaschine Schmedt PräForm HHS 20 Case Press and Joint-Setting machine Schmedt PräForm HHS 20 Baujahr / Year 02/1981 - Serial-Nr. 09 Buchhöhe / Book height: 100 - 520mm Buchbreite / Block width: 120 - 400mm Blockstärke / Block tickness:: 8 - 100mm Leistung / Output: ca. 150 St/h Pressluftanschluss / Air supply: 6bar Elektrischer Anschluss / Power supply: 230V / 50Hz / 2.0kW Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Lhodsrmul Dopfx Ad Neb Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: excellent (used), Year of construction: 1997, power: 1.5 kW (2.04 HP), Tria plastic grinder, shredder, granulator for sale in excellent condition make: TRIA 20-15/BL-T Power: 1.5kW, 50Hz, 380V Year of manufacture: 1997 Lodpfxjra N A Ns Ad Nehb Inlet opening: 200 x 230mm rotating knives 3 pcs standing knife: 1 pc Spout opening: 60mm Final product size: 3-5mm Capacity: 30 kg/h approx.

Condition: good (used), Year of construction: 1987, Manufacturer: Bergmann Type: PS 8100 Height: 2.200 mm Width: 1.200 mm Length: 1.625 mm Lodpfxjk E Hh Ss Ad Nshb Loading height 1.900 mm Weight: 800 kg Nominal current in 400 V 4,8 A Nominal transformator current in 230 V 0,38 A Motor power: 2,2 kW Fuse: 10 A, slow Rotation: 13 ./min Protection: IP 54 Fire class: D, E Hidraulic oil: HLP 32 Bale weight (depend from the material): 150-400 kg Bale volume: 1 m³

Condition: ready for operation (used), DIXI 60SLD is a semi-automatic baling system with a pressing force of 60 tons, designed for economical volume reduction of recyclable residues in industrial and craft sectors: - Cardboard boxes - Foams - PET bottles - Insulation mats - and other pressable materials Horizontal baler, DIXI 60 SLD waste press with tipping device Technical specifications: Pressing force: 60 tons Specific pressure: 6.81 kg/cm² Power supply: 400V / 7.5kW Lsdpfx Adera A E Ue Njhb Bale dimensions: 800 x 1100 x 1200 mm Number of ties: 3 Bale weight: approx. 370–410 kg Tying: manual Feed opening: 990 x 1110 mm Machine weight: 5,420 kg Average pressing cycle: 47 sec Year of manufacture: 2011–2016 Dixi 80SLD Baler Technical Data of the Baler Brand: Dixi Model: 80 SLD Pressing force: 80 tons Drive power: 11 kW, 400 V / 32 A Feed opening (W x H): 1040 x 1110 mm Pressing cycle: approx. 35 sec Throughput: approx. 1,000 kg/h Bale size (W x H x L): 1120 x 1120 x 1200 mm Bale weight: depending on material, approx. 500–600 kg Bale tying: triple, manual Machine dimensions: Length: 4,200 mm (+cage 1,600 mm) Width: 1,830 mm Height: 2,620 mm Machine weight: approx. 8,000 kg Automatic bale ejection Robust construction for long-term use Year of manufacture: 2016–2020 Weight: approx. 8.4 tons Condition: Used

Year of construction: 2004, condition: ready for operation (used), Connected load: 15.5kW, weight: 6.8t. Lhjdpeip D Rzefx Ad Nob

Condition: used, High-lift pallet truck, pedestrian stacker, manual hand pallet stacker LOGITRANS type LF 1001 / 1600 Lhodpfxedz Spms Ad Nsb Tool lifter Serial number: 051E04006100 Year of manufacture: 2005 Load capacity: 1000 kg Lift height: 1600 mm Fork length: 600 mm Platform size: 800 x 650 mm Overall length: 1200 mm Overall width: 800 mm Height: 1930 mm - Lifting via mechanical lift hydraulics, pump action using the tiller arm - 2 lifting speeds: approx. 36 strokes to lift to 1600 mm, or approx. 10 strokes for 10 cm lifting height. - Manual movement by pushing - Fork lifting in single mast with free lift Own weight 198 kg Very good condition

Condition: good (used), Year of construction: 1973, Waste compactor, waste compactor, compactor container, waste container, self-compacting container, mobile waste compactor, paper compactor container, paper container -Stationary press for: interchangeable containers -Load chute: covered -Pressing process: hydraulic Lodpfx Aob A Ii Sed Nehb -Pressing process: automatic -Emergency safety switch: at the deposit slot -Piston dimensions: 1450 x 650 mm -Piston stroke: 1100 mm -Transport dimensions: 2100 x 4500 mm -side threaded ratchets for skip containers -Functionally tested