Gear motor 1.5 kW 32/1420 rpm

Bauknecht RF1,5/4-72mg

Condition: good (used), three-phase motor, electric motor Gvsz3O -Handover: in current condition as viewed -Note: the base of the engine has been welded once -Power: 52/143 kW -Speed: 1485/2970 rpm -Shaft conical: Ø 70 to 60 mm 125 mm long -Design: B3 -Protection class: IP 54 -Dimensions: 1130/920/H630 mm -Weight: 876 kg

Condition: used, power: 0,18 kW for edge banding machine Homag type KL 37 DS or similar. Tauhkuwh

Condition: ready for operation (used), Bauknecht ATB 18,5/2-75 Motor,used, strong signs of wear, 100% functional, scope of delivery according to photos ATTENTION: Pleasequire for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Uuh0Sdkrwl

Condition: used, Electric motor, three-phase motor -Manufacturer: Bauknecht, electric motor type R 4.5/4-71r -Power: 4.0 kW -Speed: 1390 rpm -Shaft: Ø 30 x 110 mm Hu2Xm2G -Design: B3 -Protection class: IP 44 -Dimensions: 470/335/H270mm -Weight: 62 kg

Condition: used, Electric motor, three-phase motor -Spare part: a CNC lathe -Power: 11/15 kW Qkoqshgwb -Speed: 1460/2900 rpm -with electric clutch: 24 V and V-belt pulley -Construction: B5 -Protection class: IP 44 -Dimensions: 820/440/H320 mm -Weight: 180 kg

Condition: used, Electric motor, three-phase motor -Manufacturer: Bauknecht, electric motor type RF 15 / 4-75 from press brake EHT type EHP 11-40 -Power: 15 kW -Speed: 1460 rpm -Shaft: Ø 42 x 110 mm -Construction: B5 -Protection class: IP 44 Bvonxcxux3 -Dimensions: 630/368 / H348 mm -Weight: 137 kg

Condition: good (used), Electric motor, three-phase motor -Power: 4 kW -Speed: 2860 rpm -Shaft: Ø 28 x 60 mm -Construction: B35 -Protection class: IP 54 -Dimensions: 380/250/H270 mm -Weight: 30 kg Bt0Kdwwm

Condition: used, Three-phase motor, electric motor 9Biioe9Oj -Power: 4 kW -Speed: 2900 rpm - Shaft: O 28 x 60 mm -Rezess: O180 mm -Pitch circle: O215 mm -Longitudinal hole spacing: 140 mm -Hole distance across: 190 mm -Construction: B5 -Protection class: IP 44 -Dimensions: 380/300 / H250 mm -Weight: 33 kg

Condition: used, Electric motor, three-phase motor -Foot defective, see photo -Power: 4 kW -Speed: 2860 rpm -Shaft: Ø 28 x 60 mm -Construction: B35 -Protection class: IP 54 Bdcdwhtush -Dimensions: 380/250/H270 mm -Weight: 30 kg

Condition: like new (used), Working width: 180 mm 4 heads Adjustment of heads in two axes Angle adjustment of heads 23Crnekou Motor: 1.5 kW Emergency stop

Condition: used, Year of construction: 2023, Working dimension X: 5.000 mm Working dimension Y: 1.500 mm Working dimension Z: 250 mm Number of milling spindles: 1 Main motor power: 15 kW Rotation speed max: 24.000 rpm Torque support: Yes 4th axis: Yes 5th axis: 5-axes spindle Milling spindle liquid-cooled: Yes Tool clamping system: HSK-F63 Tool changer positions: 17 Linear tool changer: Yes Pickup change place: Yes Gantry machine: Yes Machine table: Pod and rail table Number of consoles: 8 Positioning aid: Yes Laser projector: Yes Vacuum pump: Yes Number of vacuum pumps: 2 Capacity vacuum pump: 180 m³/h Safety device: Bumper Two rows of stops: Yes Tool charge measurement: Yes Workpiece support aids: Yes Handheld terminal: Yes Enclosed drag chain: Yes Automatic central lubrication: Yes Control: FORMAT 4 F4 INTEGRATE Software: FORMAT 4 F4 OPERATE, FORMAT 4 F4 TOOLBOX, TPA ALBATROS 3 Qedfipv Conformity marking: CE mark, UKCA-Zeichen Total connection: 21 kW Space requirement Length: 8,9 m Space requirement Width: 3,9 m Space requirement Height: 2,61 m

Condition: refurbished (used), Year of construction: 1996, Universal tool milling machine KUNZMANN WF 4/3 With 3 axes Heidenhain digital readout Year of construction: 1996 Travels: X 400 Y 320 Z 400 Speed range: 40 - 2550 rpm With the following accessories: Rigid angle table 800 mm x 360 mm clamping surface Mechanical handwheels for X , Y , Z axis Hydraulic tool clamping Automatic central lubrication pump for X , Y , Z axis Machine light 4-piece machine shoes Coolant device Operating instructions THE MACHINE WAS ONLY USED FOR APPRENTICE TRAINING !!! B2Ygkqd0Ac THE MACHINE IS IN GOOD CONDITION !!!

Condition: excellent (used), Year of construction: 1990, GUK folding machine FA35/4-R1-SAF35-Automatic 720 - with 4 pockets - friction feeder -R1 - with counter - format max. 350x650mm - format min. 70×90 mm - smallest fold 15mm - output 10-30,000 depending on material - friction feeder R1 - 4 folding pockets 350 mm- infeed width - with noise protection 3K3Szlx7W - steel-rubber rollers - special accessories: with transport rollers - special production - rollers and belts in order - location: Germany - available - immediately Well-maintained machine The machine is in good technical and visual condition

Condition: used, various tool holders from , mazak, sandvik, mimatic, gerardi, ews, nikken and others. turning-milling tools with the C6 and VDI 40 holder only for sale per pallet pallet5 (photo 1 to 4) euro 3700 total 3x driven tools vdi 40 euro 650/pc 13x tool holder c6 euro 50/pc 11x tool holder vdi 40 euro 100/pc pallet 6 (photo 5 to 8) euro 3750 total 3x driven tools vdi 40 euro 650/pc Dq0Ng2 16x tool holder c6 euro 50/pc 10x tool holder vdi 40 euro 100/pc pallet 7 (photo 9 to 12) euro 3850 total 3x driven tools vdi 40 euro 650/pc 18x tool holder c6 euro 50/pc 10x tool holder vdi 40 euro 100/pc pallet 8 (photo 13 to 16) euro 3700 total 3x driven tools vdi 40 euro 650/pc 13x tool holder c6 euro 50/pc 11x tool holder vdi 40 euro 100/pc

Condition: excellent (used), Year of construction: 2015, Functionality: fully functional, overall weight: 3,000 kg, operating pressure: 6 bar, power: 37 kW (50.31 HP), input frequency: 50 Hz, type of input current: three-phase, type of cooling: air, Donaldson Torit dust collector, type DFO 4-32. dust extractor separator Dust extraction for all types of dry dust, welding fume extraction. manufacturer: DONALDSON TORIT DFO 4-32R year of manufacture: 2015 T7Efcbi7E Ultra Web® filtration area: 564.8 m² 7500-21300m3/h 6300-4600 pa Automatic pulse filter cleaning ASCO Donaldson TCB "total control board" Flow rate between 16-20400m3/h number of oval filter cartridges: 32 filter cartridge type:DONALDSON DFO 2625175 Oval cartridge filter Ultra-Web Spunbond antistatic material, 289 x 365 mm outer diameter x 660 mm long centrifugal fan: 37kw ATEX air delivery: 7500-21300m3/h 6300-4600 pa mounted platform with railing, ladder for maintenance. height: 4200 mm + cyclone ca 2000mm width: 2200mm length: 2200mm weight: 2200kg

Condition: like new (used), Year of construction: 2016, power: 235 kW (319.51 HP), Equipment: hot water, Each unit has their own RHI accreditation with 13 years left on the scheme. This will earn you around £130,000 per year in Tier 1 RHI earnings for the next 13 years, proof of workings & RHI can be shown upon request. This price does not include fitting but our company can quote you for this if needed subject to site survey. These Entrade e3 CHP units come in a containerised solution containing 4 units and are all hydraulically linked. Hu3Px8O The German made E3 Combined Heat and Power Unit from Entrade offers base-load power from biomass and waste products right where it is needed, 24/7. The E3 produces power at your site that costs less than electricity from the National Grid or heating from natural gas. The Entrade Biomass based CHP boiler is available in power outputs from 25kW to 2MW (electricity generation range). Unlike generators that use fossil fuels the E3 Heat and Power unit will power your life and business in a completely sustainable and carbon neutral manner. Our patented design has been developed with few movable parts to ensure safe and secure power supply and to keep operational handling and maintenance downturn to a minimum. Anymore information please get in contact, thanks.

Condition: used, Year of construction: 2022, Working dimension X: 3.090 mm Working dimension Y: 2.100 mm Working dimension Z: 85 mm Number of milling spindles: 1 Rotation speed max: 24.000 rpm Torque support: Yes 4th axis: C-axis Tool clamping system: HSK-F63 Tool changer positions: 15 Linear tool changer: Yes Vertical drilling spindles: 12 Horizontal drilling spindles in X: 2 Horizontal drilling spindles in Y: 2 Groove saw: in X-direction, in Y-direction Gantry machine: Yes Machine table: Matrix table Vacuum pump: Yes Bhiwbt7 Number of vacuum pumps: 2 Capacity vacuum pump: 500 m³/h Suitable for nesting: Yes Outfeed: Conveyor belt Labelling: manually Safety device: Light barrier Interface for .dxf data: Yes Remote control: Yes Tool charge measurement: Yes FORMAT 4 Smart Zoning: Yes Control: FORMAT 4 F4 INTEGRATE Software: FORMAT 4 F4 Conformity marking: CE mark, UKCA-Zeichen Total connection: 23 kW

Condition: excellent (used), Cnc rotary table, Nikken 5AX-230 4 and 5 axis for Mazak etc. was mounted on a VTC 300, due to new machine 5 axis now for sale, Isszwki

Condition: used, FORMAT 4 profil 45 M x-motion table router -used- swivels to the rear, electric height adjustment, electric tilt, Height and swivel adjustment with positioning control, Positioning control for milling fence, table extension, extendable support, finely adjustable milling fence, right/left rotation, incl. arc milling fence, Swivel device for feed, integral fence, Year of manufacture 2022 ----- Technical data ----- Swivel range: +5 -45 °, Table size: 2,500 mm, Spindle diameter: 30 mm, Useful length of milling spindle: 140 mm, max. milling cutter diameter: 250 mm, max. retractable cutter diameter: 320 mm, Speeds: 3,500/4,500/6,000/8,000/10,000 rpm, Bqxgci0T Motor: 7.35 kW, Extraction nozzle Ø: 140 mm, Suction nozzle Ø bottom: 80 mm, weight: 730 kg

Condition: excellent (used), PART NUMBER 7221 TECHNICAL DATA - min / max width of the workpiece 45 / 150mm - min / max height of workpiece 15 / 50mm 3 spindles: 1) horizontal bottom 11kW 2) horizontal top 22kW (7000rpm) 3) horizontal lower 5.5kW diameter of spindles 40mm - spindle 1 and 3 manually adjustable up/down, right/left - spindle 2 manually adjustable right/left Bqakjqgmme - spindle 2 electrically adjustable up/down - spindle 2 and 3 are equipped with brakes top: - 3 infeed, pulling, metal toothed rollers - 1 double infeed, pulling, rubber roller from below: - pressure on the introduction - corrugated top - pulling roller, metal, smooth - electric setting of planing thickness - smooth adjustment of the feed speed 6-24m/min - feed motor 3kW - feed on cardan rollers - length of the input table 1970mm - automatic system of table top lubrication - diameter of the exhaust stub 1x150mm, 2x140mm - dimensions L/W/H 3070x2000x1800mm - weight 2000kg ATTRIBUTES - made in Germany - for 3 heads - for processing lamellas - grooved top - heads included - unpainted - very good condition - used planer Net price: 175900 PLN Net price: 39970 EUR Net price calculated at the rate of 4.4 PLN/EUR (with major exchange rate fluctuations, the price may change)

Year of construction: 2016, Condition: used, Used machine Cross sanding machine Year of construction 2016 Product advantages Underneath perfectly lacquered, stained or oiled wood surfaces there is always a perfectly sanded surface! Felder sanding machines are characterized by solid construction, state-of-the-art machine technology and maximum productivity. The most important highlights at a glance: ? Sanding width 1350mm ? Sanding width 3-170mm ? Combined superfinishing unit ? Touch-screen control for work processes ? The Felder operating concept guarantees maximum process and work safety Your advantages at a glance: Time saving ? Motorized adjustment of the contact roller in the 1/100 mm range from the control panel ? Innovative unit arrangement for pre-sanding / fine sanding of veneered workpieces ? Brushing devices at the machine outlet ? Lacquer sanding against additional equipment ? comfort ? Fixed feed table height (machine head adjusts) ? Touch screen control with clear image display and program memory ? Machine data acquisition for sanding belt wear and much more. ? Tool-free handling when changing the sanding belt ? Large fold-down table extensions for the heaviest workpieces ? flexibility ? Units for calibration, fine sanding and lacquer sanding ? Variable feed speed up to 20 m/min by means of inverter Innovation ? Electronically segmented sanding pad with silicone technology for minimum air consumption ? Combined superfinishing unit incl. chevron sliding belt to compensate for oscillation marks ? quality ? Solid machine construction ? Durable machine components Basic equipment Control unit finish 1350 classic Control unit with 7" color touch screen 100 program memory locations Maintenance intervals Plain text error messages Ammeter for load monitoring Feed table fixed infeed height - fixed table, 900mm, electric height control of the units incl. fine adjustment from the control panel, V-speed infinitely variable from 2.8-20m/min. Adjustable via inverter from the control panel Manual protection and workpiece over-thickness protection Workpiece detection sensor with 25 sensors 55 mm segment width Endlessly manufactured belt conveyor with honeycomb structure Automatic feed carpet centering Cross sanding unit finish 1350C high gloss Segmented, electronic-pneumatic sanding pad ESC, segment width 25 mm, incl. quick-change system Chevron sliding belt between sanding pad Sanding belt for homogeneous sanding without oscillation marks Variable pressure control on the operating side Electro-pneumatic sanding belt oscillation Electronic sanding belt run-off protection 1 motor with 7.5 kW (10 hp) Star-delta start-up Cleaning fan with time control Cutting speed 12 m/sec Sanding belt 140 x 4560 mm Combined superfinishing unit 1350C: Rubberized, grooved contact roller with 85-90° Shore hardness and 142 mm diameter Electromot. Position-controlled grit compensation segment, electro-pneumatic sanding pad ESC, segment width 25 mm, incl. quick-change system Variable pressure control on the operating side Chevron sliding belt between sanding pad and sanding belt belt for homogeneous sanding without Bka09Wjg7Uw oscillation marks Mechanically pre-tensioned rubber pressure rollers Electro-pneumatic sanding belt oscillation Electronic sanding belt run-off protection

Condition: like new (used), Year of construction: 2023, Functionality: fully functional, total length: 1,310 mm, total width: 390 mm, total height: 40 mm, 120 pcs. Shelves approx. 131 x 39 x 4 cm , SSI Schäfer R3000 , II. choice (new) Shelving racks Workshop shelving , Storage racks , Manual storage , Push-in shelving , Small parts storage B40/392/70 , ZB341315 , ZB9414 Data : Tmv8Ybo3S - Length: approx. 131.2 cm - Width: approx. 39 cm - Height: approx. 4 cm - Scope: 120 pcs. Shelves SSI Schäfer R3000 - Load : max. 100 kg per shelf - Surface : sendzimir galvanized - II. CHOICE (NEW GOODS)(This is a II. Wahl product, new and unused.II. Choice means there may be dust deposits, minimal scratches or soiling). - ex warehouse Wietmarschen Price : 960,00 € net 1142,40 € gross You will receive an invoice with VAT shown. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: used, Year of construction: 2004, Working width: 510 mm Working height max: 254 mm Number of knives: 4 Length planing table: 2.250 mm Stop tiltable by: 45 ° Depth of cut of the planer: 8 mm Depth of cut of the thicknesser max: 8 mm Number of feed-out rollers: 1 Qfcopoiec Main motor power: 5,5 kW Feedrate max: 16 m/min Continuously variable feed: Yes Protection cover: Yes Table rollers: Yes Height adjustment: electro-motive Cutter block: Barke/Brück Table tilting: Yes Declaration of CE-conformity: Yes Conformity marking: CE mark Weight: 860 kg Space requirement Length: 2,3 m Space requirement Width: 1 m Space requirement Height: 1,1 m

Condition: used, Edge banding machine FORMAT 4 Tempora 60.06 glueBox - used Touchscreen, swivel control panel, program memory, automatic pressure bridge adjustment, Feed by means of transport chain, extendable workpiece support, diamond milling cutter in synchronized and counter-rotation, bottom-mounted glue pot, Changing device for glue tray, PUR adhesives can be used, Bsmdnbchkls GLUEBOX, pressure unit with driven roller, Cross-cut saw with 2 HF motors, Cross-cut saw can be tilted pneumatically, Flush / radius trimming unit, motorized positioning control for trimming unit, x-motion PLUS, Corner copying unit with diamond-coated cutter, Radius scraper, Radius scraper with motorized positioning control surface scraper, insert-controlled surface scraper, infeed stop, Release agent spraying device, Lubricant spraying device, Cleaning agent spraying device, Year of manufacture 2022 ----- Technical data ----- Edge thickness of rolls: 0.4 - 3 mm, Edge thickness of strips: 3 - 6 mm, Workpiece thickness: 8 - 60 mm, min. Workpiece length: 140 mm, feed speed: 10 m/min, Screen diagonal: 15 inch, Dimensions of jointing cutter: D 80 x 64 mm, Power of jointing cutter: 1.1 kW, Cross-cut saw power: 0.35 kW, Milling station power: 0.75 kW, Extraction nozzle Ø: 80 + 160 mm, Compressed air connection: 7 - 10 bar, Total length: 4,872 mm, Dimensions (LxWxH): 4,872 x 1,511 x 1,468 mm, Weight: 1,500 kg

Condition: used, Year of construction: 2014, Used machine Used edge banding machine of the company Format 4 type Perfect 710 E - Motion Year of construction: 2014 MNo.: 200.02.011.14 Technical data: Control unit with 10.4" touch color screen Extendable workpiece support motorized - position-controlled pressure beam Hpxtgozo chain feed with 12m/min feed speed Roller support plate with ball bearings d = 770 mm 2 motorized joint milling unit / 2 x 1.1 kW Edge feed for roll and strip material 0.4 - 10 mm (edge detection via infrared sensor) Teflon-coated gluing unit Pre-melting unit for EVA glue Replacement gluing unit for EVA Replacement gluing unit for PU motorized positioning-controlled pressing unit 2 motorized cross-cut saw unit / 2 x 0.50 kW 2 motorized multifunctional units for radius, flush and chamfer trimming / 2 x 0.75 kW Corner processing unit Radius scraper Surface scraper 2 motorized polishing unit (buffing wheel) Spraying unit for release agent on the machine infeed side Spraying unit for cleaning agent in front of the polishing unit Availability:short term Location: Flörsheim