Bale press

Avermann MPC 20 PE

Condition: ready for operation (used), functionality: fully functional, MPC 20 PE - compactor container Bdjdpfx Aqoyilt Dersc

Condition: good (used), Year of construction: 2002, Beringer BPx4 ergo Useful volume 6cbm tested, serviced, fully functional Can be painted in the desired RAL color. Noes3koku We would be happy to make you an offer including delivery. Bodotp Hnwepfx Aqredc

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 55,771 h, laser hours: 35,157 h, laser power: 3,200 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 8 mm, table length: 3,000 mm, table width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 150 mm, positioning speed: 140 m/min, positioning accuracy: 0.02 mm, year of last overhaul: 2024, feed length X-axis: 3,000 mm, feed length Y-axis: 1,500 mm, feed length Z-axis: 150 mm, Equipment: cooling unit, documentation/manual, safety light barrier, The laser is in operation, can be inspected and tested. Regularly serviced in good technical condition. Mirrors completely replaced in 2024. Bdjdpfx Aqjv Hxbbersc

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: HBC 140 2x75kW 2001 (210-008-01), pressing force: 155 t, bale weight: 1,500 kg, pressure: 250 bar, power: 150 kW (203.94 HP), year of last overhaul: 2024, Equipment: documentation/manual, Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler and conveyor: Bollegraaf HBC140s Baler (2x75kW). Baler: Weight: 47.100 kg Construction year: 2008 Hardox bottom floor plate only Variable channel pressure control Plastic valve Hydraulic pump driven by frequency inverter Anti-rat cabling Oil in-depth filtration Modem Hours 40.000 This baler can also be sold fully refurbished according to the 'Bollegraaf OEM Certified Refurbishment standards'. This includes 2 year guarrantee. Contact us for more information or a quotation. General principles of refurbishment Cleaning & disassembly Before the actual refurbishment takes place the baler is completely cleaned and disassembled in our refurbishment workshop. Tolerances After the disassembly the tolerances of all steel components are measured and re-welded where necessary, this at least applies to the following components; • Ram, • Frame, • Channel, Bdsdpfx Aotvau Aoqrjc • Pre-press-flap After disassembly and inspection the ram is welded-up again and fitted with new ram wheels. The protective grids and the pre-press flap are made dent-free and repaired where necessary. Repainted After measuring the tolerances and any repair- and welding work, all components are being blasted and coated again. Hydraulics: The hydraulic tank is cleaned. The hydraulic lines & hoses are replaced. The hydraulic components are repackaged. The hydraulic oil is replaced. Cabling: All cabling is checked and replaced if necessary. All junction boxes are replaced and placed back in easily accessible positions. Wear parts: All wearing parts are replaced. The pins and shafts of the cylinders and the channel are replaced with new ones. All wearing parts of (both) needle installations and knotters are replaced for new. Cylinders: The cylinders are repackaged and, if necessary, provided with a new chrome layer or a new cylinder rod. MCC Cabinet The switch box is checked and cleaned. If necessary, electronic components are replaced with new ones. The PLC and HMI (human interface) are replaced with the latest Schneider M340 version including the latest software.

Condition: new, - Motor power 9 kW - PLC-controlled, two-hand safety operation - Cutting force 35 tons - Straight splitter table - Cutting channel: - max. blade length L = 2000 mm - max. opening H = 1200 mm - Machine weight approx. 4 tons - Color RAL 5012 – light blue - Hand guard mesh at the control panel area and on the opposite side - Forklift entry shoes included (for easy transport of the machine by forklift) Bdodpfogl Ac Ssx Aqrsc Made to order Price and further information upon request

Condition: good (used), functionality: fully functional, Sheet width: 4050 mm Sheet thickness: 8 mm Cutting angle: 2 - 10° Cutting speed: 0.053 m/s Table length: 710 mm Machine weight approx.: 10,100 kg Bdsdoxu Nc Ispfx Aqrjc

Condition: excellent (used), Year of construction: 2014, operating hours: 37,656 h, functionality: fully functional, pressing force: 85 t, filling opening width: 1,500 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 650 kg, overall weight: 25,000 kg, oil tank capacity: 1,000 l, year of last overhaul: 2024, volume flow: 410 m³/h, transport width: 2,400 mm, transport length: 9,300 mm, Hello, We are offering you a used baler from the manufacturer Presona AB, type LP 85 VH1, subject to availability. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot guarantee their accuracy or completeness. Manufacturer: Presona AB, Sweden Type: LP 85 VH1 Year of manufacture: 2014 Total operating hours: 37,565 hours, as of March 2025 Main press force: 85 t Specific press force: 100 N/cm² Pre-press flap force: 28 t Feed chute dimensions: 1,500 x 1,100 mm Filling volume per press cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying system: 5-fold vertical Hydraulic oil tank volume: 1,000 L Press dimensions: 10,350 x 2,400 x 3,150 mm (L x W x H) Press weight: approx. 25 t Bdedpfsv T I Evsx Aqrsc Note: The machine was used for compaction at a recycling plant. Used for the production of paper, cardboard, films, and plastics such as bottles, buckets, canisters, and drums. The press is in good condition. Many wear parts and entire assemblies have been replaced over the past three years. The machine has been regularly serviced. We would be pleased if this press is of interest to you. Your service team at Mertens & Frowein GmbH

Condition: excellent (used), Year of construction: 2001, AMADA MODEL HFE 103L LONG STROKE 100 tons capacity x 3000 bending length hydraulic downstroking press brake complete with OP 2000 7 AXIS cnc control, machine mounted electronic guards , side and rear interlocked fencing Model Amada HFE 1O3 L downstroke CNC Press brake Year 2001 Bsdpfou Iukfox Aqrsdc Tonnage 1000 KN Type OP 2000 CNC Controlled Axis Y1, Y2, X, R Max. Bend Length 3000 mm Open height 620 mm Stroke Length 350 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Return Speed 1-100 mm/sec Oil Capacity Motor Power 7.5kw Weight 7600 kg Bed Length 3000 mm Bed Width 60 mm Open Height 470 mm Throat Depth 420 mm CNC Control Max gauge 1000mm R axis 250mm can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Year of construction: 2015, condition: ready for operation (used), - USED - FIBER LASER CUTTING MACHINE WITH PALLET CHANGER X-AXIS TRAVEL: 3048 mm Y-AXIS TRAVEL: 1524 mm Bdjdpfovcr Tpjx Aqrec Z-AXIS TRAVEL: 70 mm MAX ADMITTED LOAD: 750 Kg/m WORKING AREA: 3000 x 1500 mm SOURCE: IPG YLS-4000 ; 4000 W CONTROL UNIT: ByVISION ACCESSORIES: PORTABLE HANDWHEEL NOTE: AUTOMATIC NOZZLE CHANGER

Condition: new, Year of construction: 2025, control type: CNC control, degree of automation: automatic, actuation type: electric, pipe diameter (max.): 65 mm, pipe length (max.): 3,000 mm, tube wall thickness (max.): 3 mm, bending angle (max.): 190 °, bending radius (max.): 250 mm, number of axes: 5, warranty duration: 12 months, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, STANDARD EQUIPMENT • 3 sets of dies (1 set of rolling die and 2 sets of bending dies, or 3 sets of bending dies, according to required dimensions) • 5-axis servo control (Y, B, C, H, V) • Servo motor-driven feeding axis • Servo motor-driven rotation axis • Servo motor-driven bending axis • Servo motor-driven H and V axes • 21” TFT touchscreen mobile CNC control unit Bedpexircgsfx Aqrodc • Rolling capability • 3D bending simulation • Collision simulation • Daily, weekly, and monthly total operation status reports • Calculation of working material length • Calculation of estimated bending time • Conversion from X-Y-Z to Y-B-C • Mobile foot pedal with emergency stop feature • Remote assistance • Bending with or without mandrel • Safety plate behind the bending head • Hydraulic clamping • Hydraulic mandrel • Hydraulic support • Hydraulic linear slide system • Hydraulic claw clamp • Electrical panel safety lock and main switch panel lock • Electrical system cooler • Overload protection • Automatic dispatch of detailed operation reports OPTIONAL EQUIPMENT (Not included in price) • Additional die sets • Safety mat (750 x 1000 mm) • Safety mat (1000 x 1500 mm) • Hydraulic oil heater • Additional mandrel length (up to 6 m, priced per meter) • Ball mandrel and wiper die set • Automatic mandrel lubrication system (for suitable tube diameters) • Hydraulic oil cooler CAPACITY MB-65 CNC/5 AXIS Maximum capacity mm: Ø65x3mm Maximum bending radius mm: 250mm Maximum bending angle °: 190° Hydraulic pressure bar: 50-200 Working length mm: 3000 Rotation tolerances: Adjustable Bending power kW: 22.5 Dimensions LxWxH mm: 6350x1400x1600 Weight kg: 3950