Router - PCB separator

Aurotek PCB Separator

Condition: used, Year of construction: 2007, functionality: fully functional, total height: 5,980 mm, total width: 3,380 mm, total length: 3,074 mm, load capacity per storage section: 460 kg, input voltage: 400 V, Automated warehouse optimization storage system KARDEX Shuttle XP500 System Type: SHUTTLE-XP-500-3050x864 Control: C2000, with B/W OP2000 display Serial No.: Year of construction: 2007 Total Load: 2 x 33,500 kg Load per tray: 460 kg (evenly distributed) Tray dimension: 3050 x 864 mm Number of trays: 32 pieces (more on request) Dimensions Shuttle W x D x H: 3380 x 3074 x 5980 mm (height Kardex is adjustable to available height) Dimensions Shuttle D with full tray extraction table: 4198 mm Power: 3/N/PE400 V, 17 A, 50/60 HZ, 8.6 kVA This offer is valid subject to the system being unsold. Technical details per Shuttle: - Maximum total capacity of the KARDEX Shuttle XP: 2 x 33,500 kg - Maximum tray capacity: 32 trays Medium X Type 2, 460 kg each, evenly distributed; more trays can be ordered. - Tray dimensions: 3050 x 864 mm - Machine dimensions: Width x Depth x Height: 3380 x 3074 (4198) x 5980 mm - Footprint of the system approx.: 14.19 m2 - Capacity with 32 trays: approx. 84 m2, each tray is approx. 2.64 m2 - Electronic volume measuring system in 25 mm grid - An access opening with sliding doors to protect people and stored goods - Control C2000 with graphic display OP-C2000 B/W - LED anti-glare lighting above access point - Use of toothed belt for minimum noise - Use of toothed belt for fastest order picking - Distances can be realized in steps of 25 mm by arranging the support profile, a prerequisite for high compression storage - Automatic full tray extraction table Price: On request, via email only Price: excl. VAT, including transport and installation Delivery time: in stock Machinehandel De Leeuw BV specializes in used machines and accessories for the metalworking industry and used paternoster systems from, among others, Kardex, Hanel / Haenel, Electrolux, Bertello, Megamat, Lista, Denocard, and automatic storage systems such as the Kardex Shuttle XP and XPlus systems. Machinehandel De Leeuw BV Oordeelsestraat 7 – b Bedpfx Acownanksnodg 5111 PA Baarle-Nassau The Netherlands

Condition: used, Year of construction: 2005, operating hours: 70,000 h, functionality: fully functional, clamping force: 4 kN, screw diameter: 70 mm, Offer-Details: Stock-No. 14171 Manufacturer Engel Type of machine ES 2050 - 400 HL Year 2005 Working hours 70000 Controlversion CC200 Screentext German Location Eschweiler - Germany Clamping unit: Clamping force 4000 kN Size of mould platens (h x v) 1400 x 1080 mm Mould height min 350 mm Max. daylight 1300 mm Hydraulic ejector - stroke 250 mm Ejector force 83 kN Injection unit: Screw diameter 70 mm Injection pressure 1482 bar Stroke volume 1155 ccm Shot weight (PS) 1040 gr. Injection rate 419 ccm/s Screw speed 183 1/min Nozzle pressure 110 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 45 kW Dimensions and weights: Dimensions of the machine ca. 8,30 x 2,35 x 2,48 m Total machine weight 31200 kg Accessories: - Anti vibration pads Bdsdsu Awalspfx Acneg - 2 x 24 zones water flower - Material hopper - degassing screw Additional Options: - Robot interface - 4 x hydraulic core pulls

Condition: good (used), functionality: fully functional, operating hours: 90 h, power: 29.42 kW (40.00 HP), motor manufacturer: Lombardini, overall weight: 2,100 kg, Goldoni Euro 45SN articulated tractor with only 90 working hours on the clock. The rotary tiller is available as an option; it is lightly used but in excellent condition. Brand: Goldoni Bodjy Sad Tepfx Acnjdg Model: Euro 45SN Drive: Diesel, 4-cylinder Weight: 2100 kg Operating hours: 90 hours Engine: Lombardini 40 hp Price without tiller: €23,500 Price with tiller: €26,000

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell Bodsfz Dubjpfx Acnsdg The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: AAY366, overall weight: 900 kg, Equipment: type plate available, We are selling our EROWA as it is now surplus to requirements. It was previously connected to our DMG65H and functioned perfectly. The robot has been updated to the latest version of the software. Clamping devices can be included by agreement. The machine is currently in storage and has been disconnected by an Erowa technician. All manuals and documentation are available. Interface specification is available. Bedpexuh Ddjfx Acnedg

Condition: used, Year of construction: 2017, operating hours: 16,000 h, functionality: fully functional, overall weight: 412 kg, load capacity: 20 kg, arm reach: 2,500 mm, controller model: IRC5, Industrial robot ABB IRB4600-20/2.50. The robot is fully functional. Year of manufacture: 2017. Power supply: 3 x 400V. 16,000 operating hours. For further information, please do not hesitate to contact us. Bjdpfx Aox Akz Ijcnedg

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. Bjdpfxofz Nb Ts Acnedg - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Year of construction: 2019, condition: ready for operation (used), A Flying Probe Tester Seica Pilot V8 Next Series with inline handling module on the left for vertical tilting of the PCB and inline handling module on the right for horizontal tilting and rotating of the PCB is available. Flying Probe Test System Seica Pilot V8 Next Series: PCB clamping system: manual, double-acting, manual active test area: 538x610mm, active test area: 518x610mm, PCB dimensions: 540x610mm, min. PCB size: 20x20mm, PCB thickness: 0.3 to 5mm, max. component height: 37mm, PCB loading: vertical, UUT edge clearance manual/automatic: 2/6mm, length: 1750mm, width: 1030mm, height: 1995mm, weight: 1.4t. Test tools/techniques: FNODE signature analysis on the nets of the unit under test, standard analog and digital in-circuit test, vectorless tests, JSCAN and OPENFIX to test ICs for opens and shorts, PWMON net analysis with power-on of the assembly, continuity tests to detect open connections on the assembly, visual tests for detecting component presence, component absence and rotation, high-resolution color camera, optional functional tests and boundary scan test capabilities, optional on-board programming tools for digital components, with complete documentation. An inspection on site is possible. Bdsdpfx Acsy Sv S Henog

Condition: excellent (used), Year of construction: 2012, Engel Victory 1350/300 Tech Ecodrive with Sepro Industrial Robot SDR 22S / Hybrid Machine / Operating Hours: approx. 18,000 hours in automatic operation Year of Construction: 2012 Bodpjzc N D Njfx Acnedg Injection Unit: Screw Diameter: 60 mm Shot Weight: approx. 670 g Injection Pressure: 1835 bar Dosing Volume: 735 ccm Clamping Unit: Clamping Force: 300 t Tie Bar Spacing: 0x0 mm Platen Size: 1200x1000 mm Ejector: hydraulic Clamping Unit: hydraulic Control System: CC 200 - Touchscreen Additional Equipment: Production line with Sepro Industrial Robot SDR 22S Machine in very good technical condition Operating Hours: approx. 18,000 hours in automatic operation Tie-barless, hybrid machine: energy-saving and very quiet Hydraulic core pull x 2 Control system with hot runner system x 12 Injection unit is wear-resistant and corrosion-resistant Main motor of the machine - driven by a servomotor with inverter - energy saving Proportional valve on the injection unit – precise injection Option to purchase spacer plates (movable and fixed), water-cooled plates, screw hole diameter M20 Material supply system Motan (dosing and conveying unit) available at an extra charge Robot Sepro Industrial Robot SDR 22S Year of Construction: 2016 4-axis robot: 3 axes are driven by servomotors (electric); Axis C - pneumatic Travel distances in axes: X-1500, Y-2200, Z-800 Vacuum x 2 Gripper x 2 Touch control panel Safety package for robot Robot with adapter, conveyor belt, and protective housing from Engel Purchase of the robot and conveyor belt available at an extra charge Dimensions: Weight: 19900 kg Length/Width/Height: 7.06x2.13x2.30 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Year of construction: 2020, condition: new, Description Automatic sprinkling chamber is a solution that allows you to reduce costs, improve quality and increase the efficiency of the surface preparation process. The automatic sprinkling chamber is equipped with a set of spray pumps, it was designed so that as little liquid as possible after the process migrates to subsequent processes, thus saving money and improving the quality of washing. This is very important, because apparent savings in systems made without the use of these solutions can generate in the future much higher costs associated with chemistry and waste disposal which will simply be more. Attention should also be paid to problems with maintaining the required bath parameters. Research and development work allowed us to develop a sprinkling chamber with the function of drying details (option) with hot air blown by a set of fans after the washing process. The sprinkling chamber is equipped with an advanced system for creating your own macro programs, which can consist of 10 steps each, depending on the number of tanks, processes can be repeated, their order can be changed, etc. Each tank has its own unique icon and name, enabling the operator to work intuitively. Optionally, the tanks can be equipped with bath replenishment systems, which can be performed e.g. between processes or at the end of the cycle. Bdodpfx Acofzq Stjnog • Control installed on the swivel arm for better access • PLC microprocessor control • 7 "touch operator panel • Very large number of nozzles, compared to other solutions • (Option) The possibility of drying details after the washing process • The ability to create your own advanced programs • Advanced damper system made of acid-resistant sheet metal, double protected by limit switches • Tight closing and full flap opening control system • To minimize fluid mixing, separate pipelines, nozzles, tanks for each treatment • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible • Fully automatic operation/ Prices are given in the catalog