Clamping plate

Aufspannplatte 2000x1200mm (2971)

Condition: as good as new (ex-display), Year of construction: 2026, -Usable internal dimensions: D=900mm H=580mm (other sizes available upon request) -Spraying pressure: 3.2 Bar -Basket load: 200kg -Tank volume: 130L -Standard accessories: • Oil skimmer • Pumping device • Frame, lid, and housing made of stainless steel • Time-controlled electric steam extraction • Basket made of stainless steel • Filter made of stainless steel on the suction side of the pump • Heating elements made of stainless steel • Mechanical basket rotation with geared motor • Electrical system IP 65, control via PLC (DGT V4) • Automatic water supply • Safety limit switch monitors lid opening • Spray nozzles made of stainless steel • Weekly timer for heating and oil separator Bedpfx Aksf A D Itenslp • Operating hour counter

Condition: new, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 310 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, quill stroke: 120 mm, total height: 1,820 mm, total width: 1,780 mm, total length: 1,400 mm, table width: 500 mm, table length: 900 mm, workpiece weight (max.): 190 kg, distance table to spindle center: 390 mm, Equipment: documentation/manual, Table surface (swivel table): 900 x 500 mm Max. workpiece weight: 190 kg Travel in X-axis: 600 mm Travel in Y-axis: 450 mm Travel in Z-axis: 380 mm Quill travel in Z1: 120 mm Spindle speed range: 40 - 2000 rpm Number of gear stages: 18 Drive power: 3.75 kW Tool taper: SK 40 (DIN 69871A) Weight approx.: 1560 kg including extensive standard accessories, including: Work area enclosure 3-axis digital display CONTUR Hydraulic tool holder for vertical spindle, tool holder SK 40, DIN 69871A, pull stud DIN 69872, including hydraulic unit Monitored spindle guard 3 conventional handwheels Complete electrical equipment for three-phase power 400 V, 50 Hz Ball screws for X, Y, and Z axes Vertical milling head Fixed swivel table, 900 x 500 mm clamping surface Swiveling device for vertical milling head LED machine light Protective bellows for the vertical and horizontal guide rails Automatic central lubrication for the axes and ball screws Coolant system with pump Set (4 pieces) of support elements Including tool holder package consisting of: 1 x collet chuck ER40 Bodpfx Aohu Rwfeknelp 7 x collets (Ø 6, 8, 10, 12, 16, 20, 25 mm)

Condition: used, Year of construction: 1985, bore capacity in steel (diameter) 30 mm x-travel 850 mm y-travel 435 mm Control HEIDENHAIN TNC 150 total power requirement 16 kW weight of the machine ca. 3500 kg dimensions of the machine ca. m F E H L M A N N (Switzerland) CNC-Controlled High Precision Drilling and Milling Machine with HEIDENHAIN CNC-Control Model TNC 150 Model PICOMAX 100 CNC – 2 + A * Year 1985 Serial No. 16 085 109 _____ Table travel: Longitudinal ( X-Axis) 850 mm Cross (Y-Axis) 435 mm Milling/Boring head travel vertical ( Z-Axis) 210 mm Table size /Clamping area 500 x 1.570 resp. 390 x 1.280 mm Mounting height below spindle, approx. 140 / 690 mm Height adjustment of Milling head max. 540 mm Distance between spindle and column 450 mm Spindle taper SF 32 Spindle quill travels 210 mm Drilling Capacity approx.. 30 mm Spindle speeds steplessly adjustable 50 – 2,500 rpm Feeds steplessly adjustable 1 – 8.000 mm/Min. Quick feed 8.000 mm/Min. Spindle drive, approx. 6 kW Total electrical load 16 kW - 400 V - 50 Hz Weight, approx. 3,500 kg Accessories / Special Features: * HEIDENHAIN – CNC Path Control System Model TNC 150 with colour Screen Grafik, Subroutines, cycles, Threading cycles, Milling Cycles, etc. Mobile Control unit with electronic handwheel. Ideal for quick set-up and approach to the workpiece. * The quill movement can be actuated manually or also by the CNC-Control, * The Drilling depth can be presetted by a 12 fold turret drum for different quillstops and with a digital display of the values on monitor. * The complete Milling/Drilling head can be positioned in 3 different heights and with automatic clamping. * Hi Precision Coordinate table controlled by the XY – CNC axis with hardened ball screw spindles. * With quick change tool holders, chucks, millers, etc. and with coolant device. Condition : Very Good to excellent - Machine under power, ideal for Bledpfx Akot Hxa Hjnep small batch production Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Year of construction: 2017, condition: like new (used), 2D Wire Bending Machime Year - 2017 Manufacturer - VIBRA Wire diameter - 1-4 mm Bjdpfx Akomqk Tpsnelp Capacity - 30pieces/ min Power - 3,5 kw

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, total height: 8,025 mm, total width: 3,405 mm, total length: 2,810 mm, load capacity per storage section: 250 kg, construction height: 50 mm, warranty duration: 12 months, Equipment: safety light barrier, Table preselection control with article management. Device comes from a lift system. Side shaft claddings have been retrofitted. No side access door. 4 units available. Machine height is adjustable. Storage lift including delivery, installation, DGUV acceptance & warranty. Bsdpfx Asw S Udysknolp

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, total height: 6,000 mm, total width: 1,750 mm, total length: 2,820 mm, load capacity per storage section: 500 kg, construction width: 1,300 mm, warranty duration: 12 months, – Tabular control panel with item management – Unit comes from a lift system – Side lift shaft cladding reproduced – 2 units available – 1300x825mm tabular panel, 500kg payload each Bjdpjzaqibefx Aknolp

Condition: good (used), Year of construction: 1999, For sale is a horizontal machining center from Axa of the Vario type with 2 milling tables. The machine is in good condition and has done little "heavy machining" (was mainly used for drilling and thread cutting). Technical data: Year of manufacture 1999 Control: Heidenhain TNC 410 M digital Table dimensions 2030 mm *500 mm Maximum table load (evenly distributed) 800 kg Min. speed 30 1/min Max. speed 10.000 1/min Drill length on X-axis (mechanical feed) 1760 mm Drill length on Y-axis (mechanical feed) 500 mm Drill length Z-axis (mechanical feed) 620 mm Machine dimensions: Height: 3900 mm Length: 2900 mm Width: 3000 mm Weight: 9 tons SCOPE OF DELIVERY/EQUIPMENT 1 spindle version SK 40 DIN 69 871 A 1 switch cabinet (integrated in the rear of the machine) Ball screws: Made by Deutsche Star Central lubrication unit: Bielomatik Hydraulic unit: Hydac RTA 2-300 MK-3 tailstock manually operated Electric handwheel HR 410 Scraper belt conveyor discharge side right Measuring probe TS 630 WORKPIECE HOLDERS NOT INCLUDED IN THE OFFER Prices plus value added tax Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? Bledpfxjtt Abmj Aknsp For further information or contact options, please visit our website

Condition: new, Year of construction: 2024, pressure 30 t throat 180 mm stroke 8-76 mm no. of strokes 80-200 Hub/min ram - range of adjustment 60 mm table surface area 360x580 mm table height 840 mm hole in the table Ø 110 mm ram surface 250x350 mm Bledpfx Aksvfhq Ajnjp tool hole in ram Ø 40 mm total power requirement 3 kW weight of the machine ca. 1,8 t dimensions of the machine ca. BxTxH 1350x1200x2100 mm

Condition: used, Year of construction: 2014, operating hours: 10,100 h, functionality: fully functional, machine/vehicle number: 12410, total height: 2,900 mm, ram adjustment: 40 mm, total width: 1,550 mm, total length: 2,000 mm, table length: 580 mm, table width: 460 mm, pressing force: 25 t, control cabinet height: 1,800 mm, control cabinet length: 600 mm, control cabinet width: 600 mm, overall weight: 4,700 kg, DGUV certified until: 01/2027, We offer a used punching machine of the type Mabu VS251/RC11 from the year 2014. The machine is in good used condition and ready for immediate use. Manufacturer: Mabu Model: VS251/RC11 Year of manufacture: 2014 Condition: used Machine type: Punching machine Bledpfeyzl Txsx Aknep Additionally, the machine is equipped with a high-quality roller feeder from Zehnder & Sommer (model EV12-22TK, year 2019), ensuring precise and reliable material feeding. If you have any questions or require further information, we are always happy to assist you. Please feel free to contact us by message or by phone. All information without guarantee. Subject to errors, changes, and prior sale.

Condition: excellent (used), Year of construction: 2006, machine/vehicle number: 12501, functionality: fully functional, pressing force: 10 t, table width: 222 mm, table length: 322 mm, overall weight: 450 kg, installation height: 197 mm, ram adjustment: 30 mm, stroke adjustment: 42 mm, Used San Giacomo eccentric press T 10V CE in very good condition, with a base frame for pallet truck transport. Further details available upon request. Bjdex A Ah Tepfx Aknslp