Second-hand machinery for sale (2,363)

Condition: good (used), Year of construction: 2004, Functionality: fully functional, machine/vehicle number: 112793, TECHNICAL DETAILS Machining diameter: max. 240 mm turning length: max. 700 mm Speed: 6000 rpm Bar capacity: 55 mm Control unit: OSP-E100L Turret: 2 x 12 stations Number of driven stations: 2 x 10 Tool speed: 5000 rpm Tool holder: VDI 30 Collet chuck: 2 x Power Chuck, MACHINE DETAILS Machine dimensions: 2700 x 2000 x 1980 mm Weight: 7000 kg EQUIPMENT - Tailstock - Tool equipment - Chip conveyor - tools Djb Elztetuva Tszeut - Bar loader IEMCA Vip 80-E - coolant

Condition: ready for operation (used), Year of construction: 2005, Functionality: fully functional, SUNNEN cross sanding machine with automatic lifting device in very good condition TECHNICAL DETAILS Honing diameter manual stroke: 1.5 - 165 mm automatic stroke diameter: 1.5 - 101.6 mm Stroke length: 6 - 170 mm Stroke speed: 60 - 500 1/min Spindle speed: 200 - 3000 rpm Spindle drive motor: 4.1 kW MACHINE DETAILS Connected load: 10.5 kVA Deb Elztotuu Dpozsut Machine weight: approx. 1 t Dimensions: 2.0 x 1.3 x 1.9 mm EQUIPMENT - two-stage grinding pressure (roughing & finishing in one cycle) - automatic grinding pressure regulation (SDR) - Automatic sanding strips - wear compensation - Filter system for honing oil cleaning - Zero cut-off or ASC

Condition: good (used), Year of construction: 2015, operating hours: 14,843 h, Functionality: fully functional, machine/vehicle number: 816815404, TECHNICAL DETAILS X-axis travel: 8,000 mm Y-axis travel: 2,000 mm Worktable length: 8,000 mm Width of the worktable: 2,000 mm Laser source: YLS-8000-CUT Laser power: 6 kW Laser type: Solid-state laser Laser gain medium: Ytterbium laser Wavelength range: 1070 ± 5 nm Operating mode: CW / modulated Modulation frequency: 0 - 5 kHz Power tunability: 10 - 100 % Control: SIEMENS Sinumerik 840D controller Programming software: Lantek or Metalix Guide: SIEMENS linear guides Cutting head: PRECITEC MACHINE DETAILS Total length: 22,000 mm Total height: 2,515 mm Total width: 4,040 mm Total weight: 33,500 kg Switch-on time: 32619 h Laser time: 14843 h Operating voltage: 400 V, 50 Hz Rated current: 113 A Laser voltage: 400 - 480 V, 50 - 60 Hz Dujb Elett Shgeztzot

Condition: excellent (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: 0-201-08-7963, TECHNICAL DETAILS Traversing speed in X-direction: Max. 60 m/min. Traversing speed in Y-direction: Max. 60 m/min. Travel speed in Z direction: Max. 30 m/min. Workpiece length X-direction: max. 3440 mm with single loading Workpiece length Y-direction: max. 3710 mm for milling with tool diameter 25 mm Workpiece thickness: max. 300 mm incl. clamping device Z-axis for main spindle travel: 800 mm & second Z-axis for drilling head Vacuum pumps: 4 pcs. Clamping table grid Raster groove exit tables: 2 pcs. Working height of grid table: 850 mm Grid dimension: 30 mm Groove width: 7 mm Groove depth: 7 mm Distance between vacuum holes: 120 mm EQUIPMENT 5-axis main spindle 15 KW " DRIVE 5+" with vibration sensor Unit interface DRIVE 5+ Disk changer 18-FACH Drilling head 17 spindles horizontal + saw 0/90° Pick-up space for saw blade 350 mm Climbing conveyor Chip and offcut disposal Power Control PC 85 with PLC control Software: Windows XP operating system, WOODWOP-PAKET AV-PC Feeding portal HOMAG Profi TBA370/40/16 Djb Elzett R E Notzeut Turning and alignment station

Condition: ready for operation (used), Year of construction: 2008, operating hours: 40,653 h, Functionality: fully functional, machine/vehicle number: 680 - 0469 (031), TECHNICAL DETAILS Control: FANUC Series 300is-model A turning diameter: 20 mm Machining length: 205 mm Speed: 10,000 rpm C-axis indexing: 0.01° Drilling capacity: 8 mm Milling capacity: 10 mm Tool holder: 6 Sleeve holder: 4 + 4 Driven tools cross machining / front: 4 / 4 Tool speed: 8,000 rpm MACHINE DETAILS Weight: 2.2 tons Dimensions: 2210 x 1102 x 1700 mm Connected load: 8.0 kVA Operating voltage: 200 V, 50/60 Hz Operating hours: 40,653 h Switch-on time: 60,898 h Parts counter: 6,365,248 pieces Dob Eott Ngtolztzjut EQUIPMENT - Bar loader LNS Express-332 (year of construction 2008) - Chip conveyor - Chip pump - Manual - CE certificate - Tool holder (see pictures)

Condition: used, Year of construction: 2016, Functionality: fully functional, machine/vehicle number: BF15103648, TECHNICAL DETAILS WORKING RANGE Travel in X/Y/Z: 160 /+40/-30 / 510 mm Bar passage: max. 45 (51) mm Turning diameter: max. 300 mm Rotation diameter over bed 430 mm Duob Elott D Adeztzjt Rapid traverse speed X/Y/Z 30 / 15 / 45 m/min MAIN SPINDLE Speed: max. 7000 rpm Drive power: max. 15 kW Torque: max. 100 Nm COUNTERSPINDLE Speed: max. 7000 rpm Drive power: max. 15 kW Torque: max. 100 Nm TOOL TURRET 1 VDI size: VDI 25 Number of tool positions: 12 Driven tools: 12 Speed: max. 6000 rpm Drive power: max. 4 kW Torque: max. 16 Nm TOOL TURRET 2 VDI size: VDI 25 Number of tools: 12 Of which driven: 12 Speed: max. 6000 rpm Drive power: max. 4 kW Torque: max. 16 Nm EQUIPMENT - Chip conveyor - Parts catcher - Accessories shown

Condition: ready for operation (used), Year of construction: 2007, Functionality: fully functional, TECHNICAL DETAILS Travel X: 1200 mm Travel Y: 950 mm Z travel: 1200 mm Dob Elott Dgioztzsut Work spindle drive power (25% ED): 67 kw Working spindle torque (25% ED): 1508 Nm Tool holder: HSK-A100 Workpiece interference circle diameter: 1250 mm Max. Workpiece height: 1200 mm Feed speeds X/Y/Z axis: 60000 mm/min Feed forces X/Y/Z: 22/18/22 N Speed range - main spindle: 20 - 6000 rpm Number of pallets: 2 Max. Pallet load: 1500 kg Pallet size (lxw): 800 x 630 mm Pallet change time: 14 s Pallet clamping area (lxw): 800 x 630 mm Machine weight: approx. 25 t EQUIPMENT Tool magazine with 80 pcs. Tool changer Tool chain magazine

Condition: ready for operation (used), Year of construction: 2012, Functionality: fully functional, TECHNICAL DETAILS Measuring field X x Y: 500 x 380 mm Camera: 2x 2MP GigE CCD cameras Resolution: 1624 x 1236 pixels Software: ATOS measurement software + GOM Inspect V8 evaluation software Rotation table (motorized) Diameter: 640 mm Load: max. 150 kg Dueb Eettky Ajlztzst Control unit Screen diagonal: 19" Manual control: via joystick Automatic control: via ATOS software Column stand Height: 1.8 m Boom: 0.9 m Details: swivel/swivel head, adapter available MACHINE DETAILS Dimensions: approx. 340 x 130 x 230 mm Weight: approx. 3.9 kg EQUIPMENT - LED lighting - Laser pointer for distance adjustment - Integrated control unit - 10m cable - Lenses for the above measuring field - Calibration object for the above measuring field with calibration certificate - Transport case - Notebook with docking station: 64-bit Intel Core i5 processor, 2.66 GHz (DualCore) 8 GByte main memory NVIDIA Quadro OpenGL graphics card 15.4" display:1920 x 1050 pixels 500 GB hard disk DVD+/-RW / CD-RW burner Cardbus-Firewire card Gigabit Ethernet network Operating system: Windows (64 bit)

Condition: excellent (used), Year of construction: 2008, Functionality: fully functional, Commissioning took place in 2009 TECHNICAL DETAILS Model: MFP L 260 - 75 Control: Siemens 840D Sinumerik Table clamping surface X / Z: 2202 / 352 mm Longitudinal stroke: 2600 mm Transverse stroke sanding support: 650 mm Distance spindle to table: 806 mm Head design: fixed, not adjustable Grinding wheel dimension: Ø400 x 160 mm Grinding wheel bore: 127 mm Peripheral speed of grinding wheel: 35 / 50 m/s Stroke speed longitudinal / transverse / vertical: 30 / 5 / 5 m/min Resolution: 0.001 mm MACHINE DETAILS Machine weight: 21 t Space requirement: 7.06 x 2.7 x 3.26 m Drive power of grinding wheel: 75 kW Debjttazfj Elztzjut Total connected load: 113 kVA Knoll coolant cleaning system Dimensions: 5.6 x 2.4 x 3 m Knoll coolant cleaning system Weight: 2,000 kg EQUIPMENT - Handwheel included - Complete documentation Purchase price of the machine was € 1,450,000

Condition: excellent (used), Year of construction: 2012, operating hours: 4,000 h, Functionality: fully functional, machine/vehicle number: 12009, Machine has processed 90 % of aluminum workpieces. A RENISHAW measuring system has been retrofitted and the tool cabinet with BT40 holders and the LISTA drawer cabinet with contents are included in the price. TECHNICAL DETAILS X-axis travel: 900 mm Y-axis travel: 650 mm Z-axis travel: 600 mm Spindle speed: 8,000 rpm, infinitely variable Torque: 285 Nm Control: FANUC Series 18i-MB Table width: 650 mm Table length: 1,100 mm Table load: 900 kg Distance from table center to spindle nose: 725 mm Deb Elztetr A Erezsut Number of slots in the tool magazine: 32 Tool holder: 40 mm Tool length: 250 mm Tool diameter: 80 mm Rapid traverse X-axis: 24,000 mm/min Rapid traverse Y-axis: 24,000 mm/min Rapid traverse Z-axis: 20,000 mm/min MACHINE DETAILS Total weight: 7,000 kg Spindle operating hours: 4,000 h Coolant supply: 20 bar Input voltage: 400 V EQUIPMENT - Documentation/Manual - Chip conveyor

Condition: excellent (used), Year of construction: 2004, Functionality: fully functional, machine/vehicle number: HFE 80-25 V021106, Machine was in use until May 2024 (not in full production, temporarily not in use) incl. many accessories TECHNICAL DETAILS Pressing force: 800 kN / 80 t Stroke: max. 200 mm bending length: 2570 mm Distance between the columns: 2125 mm Dusb Elztjtr Ayxjzet Stand projection: 420 mm MACHINE DETAILS Dimensions: 3630 x 2450 x 2550 mm Weight: 5750 kg Rated current: 15.2 A Operating voltage: 400 V, 50 Hz Noise level: 75 dB(A) Power consumption: 9 kW

Condition: good (used), Year of construction: 2007, Functionality: fully functional, TECHNICAL DETAILS Swing diameter over bed: 430 mm Swing diameter over cross slide: 210 mm Center distance: 600 mm Turning diameter: 220 mm Part length: 510 mm Bar diameter: 45 mm Travel in X: 160 mm Travel in Z: 310 mm Speed range: 0 - 6300 rpm Torque at the spindle: 78 Nm Spindle connection: DIN 55026 KK 5 Spindle bearing: 80 mm Spindle bore: 53 mm Drive power: 13 kW Resolution of the rotary axis: 0.001 Rapid traverse speed: 100 rpm Spindle indexing: 0.01° Number of tool positions: 12 Tool shank according to VDI (DIN 69880): 30 Tool cross-section for square tools: 20 x 20 mm Shank diameter for boring bars: 32 mm Turret indexing time: 0.14 s Number of driven stations: 6 Power: 4 kW Torque: 16 Nm Speed range: 0 - 5 000 rpm Rapid traverse X / Z: 20 / 24 m/min Feed force in the X / Z axis: 4000 / 6000 N Acceleration time: 0.1 s Position spread Ps (according to VDI 3441) X / Z: 0.003 mm MACHINE DETAILS Height of the rotary axis above floor: 1152 mm Height of the machine: 1,940 mm Installation area: 2,250 x 1,630 mm Total weight: 3300 kg Cooling system container volume: 230 liters Pump output: 0.57 kW Bar loader Bar length: 100-800 mm Bar diameter: 6 -45 mm Material storage: 13 bars with Ø 45 mm Length: 1200 mm Dusb Elott Dzyoztzst Width: 1100 mm Weight: approx. 330 kg

Condition: ready for operation (used), Year of construction: 2004, operating hours: 9,497 h, Functionality: fully functional, machine/vehicle number: 15135302384, TECHNICAL DETAILS Control: Heidenhain type Plus IT X-path: 3000 mm Y-path: 560 mm Z-path: 720 mm Spindle speed: 12000 rpm (infinitely variable) Main spindle drive power: 35 kW Table load: 3000 kg Number of T-slots: 6 / 18 H7 T-slot table: 3,400 x 600 mm) - Distance between T-slots: 100 mm Tool weight: 100 kg Tool length: 300 mm Tool diameter: 130 mm Tool holder: SK 40 Tool magazine: 40 places Rapid traverse X-axis: 100 m/min Rapid traverse Y-axis: 50 m/min Rapid traverse Z-axis: 50 m/min Internal cooling: 40 bar MACHINE DETAILS Power consumption: 60 KVA Duebjtt Dc Hs Elztzst Switch-on time: 22,231 h Spindle time: 9,497 h EQUIPMENT - IKZ (internal cooling) - Belt filter (Interlit, type SPB 3/600, year of manufacture 2004) - Chip conveyor (make BMF, type KFE 63/50-450 Z60, year of manufacture 2004) - Chip trolley - Infrared measuring probe, make Heidenhain, type TS 642 - 40x tool holder SK 40 - Tool cabinet

Condition: like new (used), Year of construction: 2011, Functionality: fully functional, machine/vehicle number: 530008, Coordinate measuring machine with probe change system Optional external programming station can be purchased additionally TECHNICAL DETAILS Measuring range X / Y / Z: 700 / 1000 / 600 mm Probe head: VAST XT gold #001RHOPF Measuring software: CALYPSO 5.6 including curve option Control: C99 with control panel BP26_SE EQUIPMENT - 7-fold probe changing system Dsb Elottkgmeztzout - Push-button plate - Probe accessories - Calibration sphere: #G00559-b r=14.9999 HP - Workstation with monitor - Documentation Further accessories - OPTIONAL: with external programming station CALYPSO 5.6 Last calibration 08/2023

Condition: excellent (used), Year of construction: 2005, Functionality: fully functional, Bar processing center with 2 angle heads, tools and accessories HIGHLIGHTS - Adjustment of the rotary angle head for 0° / 90° / 180° / 270° Dusb Ejtrxu Tslztzot - Processing of profiles from the front, rear and front with 2 tools - Power-Torque milling spindle - increased torque in lower speed ranges TECHNICAL DETAILS Travel X / Y / Z: 3850 / 350 / 280 mm Max. Machining length with/without end face machining: 3650 / 3750 mm Control: E 550 Spindle speed: infinitely variable up to 21,000 rpm Cutter diameter: up to 63 mm Disk cutter diameter: up to 200 mm Spindle holder: HSK F 63 Spindle drive: 6 kW Tool change: automatic, 4 places plus angle head Rapid traverse X / Y / Z: 50 / 30 / 30 m/min MACHINE DETAILS Dimensions: 4600 x 3230 x 2420 mm Weight: 1.7 tons EQUIPMENT - Tool holder: 3 pieces - Tool measuring device - Drill chuck - Rotation angle head - Safety device light barrier - Automatic clamp displacement - Program detects collision

Condition: excellent (used), Year of construction: 2005, operating hours: 37,065 h, Functionality: fully functional, machine/vehicle number: 11520000043, TECHNICAL DETAILS X-axis: 1,000 mm Y-axis: 1,000 mm Z-axis: 1,000 mm B-axis: 0.001° Speed range: 8,000 rpm Control system: Siemens 840D powerline + Shopmill Gear stages: 2 Tool holder: HSK 100 Dsbetrxl Ds Elztzeut Tool positions: 270 / 360 Number of pallets: 2 Pallet size: 800 x 800 mm MACHINE DETAILS Dimensions: approx. 4.4 x 3.2 x 3.3 m Weight: approx. 18 tons Operating hours: 37,065 h Switch-on time: 99,223 h EQUIPMENT - Electronic handwheel - Operating mode: 4 - Oil mist extraction - Internal cooling (IKZ): 40 bar - Paper band filter - Measuring probe: Renishaw OMP 60 - Chip flushing gun

Condition: excellent (used), Year of construction: 2004, operating hours: 13,600 h, Functionality: fully functional, machine/vehicle number: 005642, Extremely solid CNC milling machine with mounted 4th axis - gearbox shifts automatically at less than 500 revolutions and thus provides an enormous torque for power-intensive machining (M30 in C45 is no problem). Extensive SK50 fixture package (approx. 90 fixtures) is included in the purchase price. TECHNICAL DETAILS Dujb Eotrf Rpslztzjt X-axis travel: 1,800 mm Y-axis travel: 850 mm Z-axis travel: 700 mm Control manufacturer: Heidenhain iTNC 530 Speed: max. 6000 rpm Distance spindle to table: 305-1050 mm Table clamping surface: 1850 x 850 mm T-slots: 18 x 7 x 120 Table load: 3,000 kg Feed / rapid traverse: 7 / 15 m/min Number of spindles: 1 Number of slots in the tool magazine: 40 Tool holder: SK50 Tool weight: 15 kg Tool dimensions L x Ø: 125 x 300 mm MACHINE DETAILS Dimensions: 4700 x 3230 x 3340 mm Machine weight: 16.5 t Connected loads: 45 kVA EQUIPMENT Documentation/manual Infinitely variable speed Chip conveyor

Condition: good (used), Year of construction: 2007, operating hours: 25,000 h, Functionality: fully functional, TECHNICAL DETAILS Turning diameter: max. 465 mm turning length: 1050 mm Rotation diameter: 680 mm Chuck diameter: 325 mm Dusb Estt Du Nelztzst x-path: 300 mm z-path: 1,050 mm C-axis: 360° Control: Heidenhain Plus IT Speed range: max. 3,500 rpm Drive power: 33 kW Torque: max. 630 Nm Spindle bearing diameter: 120 mm Spindle bore: 100 mm Max. Bar diameter: 90 mm Tailstock travel: 850 mm Quill stroke: 150 mm Tailstock holder: MK 5 Rapid traverse X / Z: 30 m/min Number of tool positions: 12 positions Tool holder: VDI 40 Driven tool stations: 12 Speed of driven tools: max. 4,000 rpm Drive power of driven stations: 8.4 kW Torque: max. 20 Nm MACHINE DETAILS Total power requirement: 50 kVA Machine weight: 9,000 kg Space requirement: 6.5 x 3.0 x 2.2 m Spindle hours: 25,000 h

Condition: ready for operation (used), Year of construction: 2000, operating hours: 48,743 h, Functionality: fully functional, machine/vehicle number: 28830006172, The machine is equipped with a chain magazine, pallet turntable and loading station. MAINTENANCE - Motor and pump for the hydraulic system replaced - Replaced the hoses - LI module replaced in the control cabinet - Drum on the Knoll system replaced TECHNICAL DETAILS X-travel: 600 mm Y-travel: 560 mm Z-travel: 560 mm B-axis: 360° Control: SINUMERIK 840D powerline Infinitely variable speed: 0 - 8000 rpm Tool magazine: Chain magazine Number of tool positions: 90 / max. 450 kg Circular pallet storage: "compact" Rotation speed PSA axis: 3 rpm Positioning time 1 x 90°: 3 s Pallet change time: 6 s Number of storage locations: 4 Pallet size: 400 x 500 mm Loading height: 1100 mm Load with 1/2 loaded pallets: max. 350/600 kg/pallet Maximum workpiece weight with one-sided load: 350 kg Workpiece height: 770 mm Torque 100 % / 40 % ED: max. 124 / 191 Nm Motor power 100 % / 40 % ED: max. 13 / 20 kW Feed rate: 60,000 mm/min Rapid traverse: 60 m/min Set-up mode: 2,000 mm/min Feed force X,Z / Y: 9600 / 8000 N Position measuring system Resolution: 0.001 mm (position tolerance according to VDU DGQ 3441) MACHINE DETAILS Machine dimensions L x W x H: 4.5 x 2.4 x 2.4 m Installation area: 7 x 5 m Transport weight incl. cladding: 3,400 kg Transport dimensions DMC 60 H L x W x H: 2.9 x 2.0 x 2.4 m Connected load DMC 60: 80 kVA Dsb Elzjtrdrnetzeut EQUIPMENT - Chip conveyor - Technical documents and installation plan available

Condition: used, Year of construction: 2011, operating hours: 4,433 h, Functionality: fully functional, machine/vehicle number: 0163000561, TECHNICAL DETAILS Turning length: 1200 mm turning diameter: 600 mm Speed: 3000 rpm C-axis and spindle brake (hydraulic): Automatic tailstock Control: Siemens 840D SL with ShopTurn Drive power 100/40% ED: 27.5 / 38.7 kW Tool turret: 12-position (disk turret) Number of driven tools: 12 Tool holder: VDI 40 MACHINE DETAILS Switch-on time: 17,831 h Spindle hours: 4,433 h Weight: 5.3 tons Connected load: 42 kVA EQUIPMENT Reinforced coolant pump max 10 bar, 20 l/min Dob Elztetr D Spjzeut Hydraulic chuck 315-91 ROTA NCK plus, Schunk Operating mode 4 - manual intervention with open work area doors Electrostatic air filter LTA Series 3000, AC 3001-R Year of manufacture 2015 Documentation Extensive additional accessories, e.g. 90 tool holders VDI40, 5 driven tools, Coromant Capto system, tool cabinets, tool trolleys, etc

Condition: used, Year of construction: 2019, Functionality: fully functional, machine/vehicle number: 186854001, TECHNICAL DETAILS Saw blade length: 4,250 mm Saw blade width: 34 mm Total height: 1,950 cm Overall length: 4,120 cm Total width: 2,450 cm Cutting speed: 150 mm/min Cutting range: 500 mm Cutting range round at 45°: 300 mm Cutting range round at 90°: 305 mm Cutting width: max. 500 mm Square cutting range at 90°: 280 mm Cutting range square at 45°: 270 mm Cutting angle range: 30 - 150 degrees Roller conveyor at the entrance: 9 meters (to feed the machine) Roller conveyor at the saw outlet: Retractable 1-meter roller conveyor MACHINE DETAILS Dsb Elzotrdmietzeut Motor power: 2,200 W Type of input current: three-phase Input power: 2.2 kW (2.99 hp) Table height: 845 mm Total weight: 2,100 kg Cutting height: max. 305 mm Input voltage: 400 V EQUIPMENT Emergency stop switch sensors Saw band brushes WIKUS saw bands Documentation/Manual

Condition: used, Year of construction: 1978, Functionality: fully functional, TECHNICAL DETAILS Pressure: 300 t Stroke: 450 mm Overtravel: 26 mm Safety distance: 130 mm Table dimensions: 900 x 600 mm MACHINE DETAILS Djbotq Hzvj Elztzsut Dimensions: 1450 x 1720 x 2850 mm Machine weight: approx. 3500-4000 kg

Condition: good (used), Year of construction: 2003, Functionality: fully functional, Punching, nibbling and forming with rotation of all tools Automation with TRUMPF SheetMaster - large format HIGHLIGHTS - Whisper-quiet punching with TRUMPF Softpunch® - 360° rotation for all tools without tool size restrictions - Setup-friendly linear magazine - TRUMPF punching tools - ideas with a system: TRUMPF Multitool® up to 108 tools - Pneumatic disposal flap + chute for small parts TECHNICAL DETAILS Working area: 3085 x 1650 mm Punching force: 220 kN Sheet thickness: 8 mm Workpiece weight: 230 kg Punching diameter: 76.2 mm Tool changer: 18 tools with 3 clamping claws Tool change time: 1.5 - 5 s Dobstq E Eko Elztzsut Part size: 500 x 500 mm Control: Bosch CC 220 S Positioning speed X / Y / simultaneous: 90 / 60 / 108 m/min Rotation axis: 360°/s through-rotation Stroke sequence 1 / 25 mm step width: 780 / 355 1/min Marking stroke sequence: 1700 1/min Position deviations: ± 0.1 mm Position spread: ± 0.03 mm MACHINE DETAILS Space requirement: 7900 x 6300 x 2200 mm Weight: 13 tons Connected load: 17 kVA Pneumatic connection: 7 bar X/Y/C-axis drive: maintenance-free AC motors Punching head drive: Hydraulic drive Machine will be auctioned without tools

Condition: like new (used), Year of construction: 2023, Functionality: fully functional, HIGHLIGHTS Dusb Estqnq Uslztzot - With manufacturer's warranty - Single-layer single chamber; flexible working mode with several modes to choose from - Highly efficient cleaning system - Intelligent control mode - Energy-saving design - Standard industrial control mode, automatic PLC processing, touch screen operation - Intelligent PID temperature control, high precision and interference protection TECHNICAL DETAILS Panel coating size: 7,800 × 2,400 mm Chamber opening height: maintenance 300 mm / continuous 100 mm Coating chamber height: 25 mm Average conveyor speed: 8 - 16 m/min Working height in conjunction with the assembly line: 1150 ± 10 mm Control mode: Touchscreen control Temperature control: PLC Intelligent Heating mode: Oil heating Temperature consistency: ± 1.5 ℃ Temperature accuracy: ± 1 ℃ Temperature range: room temperature - 160 ℃ Vacuum pumping speed: 600 l/s Compressed air flow rate: max. 600 l/min Compressed air pressure: 0.6 - 0.8 MPa MACHINE DETAILS Dimensions: 24,700 × 3,410 × 1,850 mm Weight: 25 tons Power supply: 380 V, 50Hz; 3 phases; 5 lines Total output: 108 kW Running power: 46 kW DESCRIPTION - The machine is heated by heat transfer oil to increase the temperature uniformity, temperature control accuracy and integrated performance, and improve the overall compatibility of the equipment. - Individual chambers, loading conveyors and unloading conveyors run together for high quality modules and a high degree of automation. - Stable and continuous loading and unloading device. Variable frequency conveying system, accurate position and conveying speed is adjustable. - Intelligent control, PLC automatic processing, touch screen operation and display function. - Upper and lower chambers of the coating chamber are equipped with PTFE Teflon sheet (cleaning system available) - For optimal gas flow conditions, the entire vacuum system is uniformly arranged so that gas suction and release is uniform and stable in all chambers. - The entire system is controlled by a solenoid valve and PLC, is operated and data displayed via a touch screen, and is equipped with a vacuum pressure sensor that displays and monitors the vacuum in the chamber in real time. - The entire heating system of the heating plate is designed and arranged according to the optimal conditions of fluid mechanics and heat transfer theory to ensure temperature uniformity, reduce pressure and reduce energy consumption.

Condition: used, Year of construction: 2015, operating hours: 7,947 h, Functionality: fully functional, machine/vehicle number: 12710000163, Maho DMU 95 monoBLOCK lid with comprehensive equipment TECHNICAL DETAILS X / Y / Z travel: 950 / 850 / 650 mm C-axis: 360° Speed: motor spindle 18,000 1/min Clamping surface C-axis table: 850 x 750 mm Clamping surface fixed table: 1,000 x 750 mm Control: CELOS® with Siemens 840D sl Operate Spindle power: 35 kW (40% ED) / 25 kW (100% ED) Tool holder: HSK-A 63 according to DIN 69893 Tool clamping: according to DIN 69872 Magazine slots: 60 (chain magazine) Duob Elztetr D H Sezot MACHINE DETAILS Weight: 13.7 t Connected load: 50 kVA Switch-on time: 23,422 h Spindle hours: 7,947 IKZ: 40 bar / 23 l/min through spindle center (AD) External coolant supply: 4 bar / 40 l/min EQUIPMENT - MPC Machine Protection Control chip tray with integrated coolant tank 500 l - 21.5 ERGOline® Control with multi-touch screen - 3D path control - Scraper belt chip conveyor with coolant system 600 liters, paper belt filter - Infrared measuring probe Renishaw PP60 optical (OMP 60) - 3D quickSET toolkit for checking and correcting the kinematic accuracy of 5-axis machine configurations - Coolant ring nozzle for vertical headstock, 15 water nozzles, 5 air nozzles - Flushing gun with pump 2 bar / 40 l/min - Cooling device Blast air through spindle center, selectable via M function - Operating mode 4 - manual intervention with open work area doors - Double switchover filter from Mahle on the coolant tank - Electrostatic air filter LTA 3000 BASIC Line 3002 year of construction 2015 - Documentation - Extensive additional accessories, e.g. 240 HSK-A 63 tool holders, long zero-point clamping system, extensive spindle tools (including - spindle tools (including Wohlhaupter), Coromant Capto system, tool cabinets, tool trolleys, etc.