Second-hand machinery for sale (2,363)

Condition: new, Functionality: fully functional, Year of construction: 2023, load capacity: 5,000 kg, lifting height: 4,700 mm, fuel type: electric, mast type: triplex, TECHNICAL DETAILS Drive type: Electric Load capacity: 5,000 kg Mast type: Triplex Lifting height: 4,700 mm Fork length: 1,200 mm Free lift: 1,500 mm Overall height: 2,340 mm Front tires: Superelastic Rear tires: Superelastic Battery: 2024, 80V, 930Ah EQUIPMENT - Sideshift - 3rd valve - 4th valve - Full free lift - Forward and reverse switch on the lever - Fully suspended driver's seat Dusb Hjtqnb Djhxn Est - Panoramic mirror - LED lighting

Condition: like new (used), Year of construction: 2022, operating hours: 5 h, Functionality: fully functional, machine/vehicle number: 170510, Commissioning took place in 2023 by a Knuth technician and a short trial run was carried out. Planned production did not take place with the lathe. (RRP is approx. 19,000 €) TECHNICAL DETAILS Center width: 1000 mm Center height: 205 mm Turning diameter over bed: 380 mm Turning diameter over bridge: 580 mm Rotation diameter over support: 255 mm Bridge length: 250 mm Dsb Hhstqm Dxjxn Eout Bed width: 250 mm 3-axis position indicator: X.Pos 3.2 VC X-axis travel: 210 mm Z1-axis travel: 140 mm Swivel range top slide: ± 45° Speed range 2-stage: 30 - 550 / 550 - 3000 rpm Spindle bore: 52 mm Spindle mount Camlock: D1-6 Spindle cone: 6 MK Thread cutting, metric: 0.2 - 14 mm Tapping, diametrical: 8 - 44 DP Tapping, module: 0.3 mm - 3.5 mm Thread cutting Whitworth: 2-72 TPI Tailstock pinol diameter: 50 mm Tailstock taper: 4 MK Tailstock quill stroke: 120 mm Tailstock cross adjustment: ± 13 mm Feed rate X-axis: 0.013 - 0.45 mm/rev Feed Z-axis: 0.026 - 0.9 mm/rev Resolution: 0.005 mm MACHINE DETAILS Motor power main drive: 5.5 kW Dimensions: 1.94 x 1.0 x 1.6 m Weight: 1210 kg EQUIPMENT - Fixed stainless steel safety cover for draw and lead screw - 3-axis position indicator X.Pos 3.2 VC - 4-B faceplate chuck Ø 250 mm - Clamping disk Ø 350 mm - Quick-change toolholder head WB - Quick-change toolholder WBD 25120 - Coolant device - Fixed steady rest - Chip tray - Splash guard - Adjustable protective cover for the work area - Rotating steady rest - Turret stop - Micrometer longitudinal stop - Foot brake - Chuck guard - Work light - Operating tool - Fixed center point - Reducing sleeve - Operating instructions further details in the PDF documents - machine was permanently connected to the power supply, which is why there is no Schuko plug

Condition: ready for operation (used), Year of construction: 2001, Functionality: fully functional, TECHNICAL DETAILS Dujb Hhxotqcu Nen Eot Sheet format: 1250 x 2500 mm Storage capacity: 114 t Storage height: 7130 mm Storage locations: 38 pieces

Condition: good (used), Year of construction: 1998, operating hours: 12,786 h, Functionality: fully functional, Bed milling machine with universal milling head/two-axis milling head with automatic tool clamping TECHNICAL DETAILS Travel X / Y / Z: 1,500 / 1,000 / 1,000 mm Speed range: 30 - 3,500 rpm Drive power: 25 kW Swivel range: 360° Torque: max. 700 Nm (50 % ED) Tool holder: SK 50 Tool changer: Portal Tool positions: 24 Dujb Hhstqcq Roxn Eot Table size: 1,600 x 800 mm Feed X / Y / Z: 0.001 - 6 m/min Rapid traverse X / Y / Z: 10 m/min MACHINE DETAILS Connected load: 42 kW Machine weight: 12,500 kg Space requirement (LxWxH): 6.1 x 5.2 x 2.9 m EQUIPMENT - Electronic handwheel - Heidenhain HR - Measuring probe

Condition: ready for operation (used), Year of construction: 2008, Functionality: fully functional, machine/vehicle number: 841, Plasma cutting system including Donaldson fume extractor and PGV gas mixer (CNC-controlled gas selection) TECHNICAL DETAILS Working area: 4,43 x 2,500 mm Track width: 3,265 mm Track length: 6,000 mm Steel sheet thickness: 60 mm Plasma gases: air, O2, N2, Ar/H2, Ar Vortex gases: O2/N2, N2, forming gas F5 Plasma source: Kjellberg HiFocus 280i Fume extraction: Donaldson DFPRO 8-CYCLO MACHINE DETAILS Dimensions: 6.42 x 4.00 x 2.20 m Compressed air connection: 11 bar Cutting quality: EN ISO 9013 Precision: DIN EN28206 Type of input current: three-phase Operating voltage: 400 V, 50 Hz Connected load plasma source: 76 kVA Deb Hhxnstp I Hke Esut EQUIPMENT Cooler Gas mixing system for changing the gas supply during the CNC program Plasma source Filter fan (2020 x 1500 x 4175 mm) Wheels are coated with polyurethane Spare wheels made of steel

Condition: reconditioned (used), Year of construction: 1997, Functionality: fully functional, Overhauled 4-axis machining center with horizontal and vertical spindle head, rotary table, pallet changer and large chain magazine TECHNICAL DETAILS X / Y / Z travel: 1500 x 1200 x 1250 mm C-axis: 360° Spindle speed: 10 - 4,000 rpm Control: Siemens 840 C Pallet dimensions: 2 x 1000 x 1000 mm Speed: 1 - 500 rpm Load: max. 2 tons Tool magazine: 161 positions (chain magazine) Spindle power: 40 kW Spindle holder: HSK-A 100 Dob Hhxjtp Irajn Eout MACHINE DETAILS Dimensions: 8.5 x 4.8 x 4.8 m EQUIPMENT - chip conveyor - Paper filter

Condition: new, Functionality: fully functional, Year of construction: 2023, load capacity: 3,500 kg, lifting height: 4,700 mm, fuel type: electric, mast type: triplex, TECHNICAL DETAILS Djb Hhxstqnaxjn Ejut Drive type: Electric Load capacity: 3500 kg Mast type: Triplex Lifting height: 4700 mm Fork length: 1200 mm Front tires: Superelastic Rear tires: Superelastic Battery: 2024, 80V, 620Ah EQUIPMENT Sideshift 3rd valve 4th valve Full free lift Forward and reverse switch on the lever Fully suspended driver's seat Panoramic mirror LED lighting

Condition: ready for operation (used), Functionality: fully functional, machine/vehicle number: 9303, Year of construction: 2002, operating hours: 11,796 h, Multi-purpose 4-way all-wheel forklift without compromise! (3 in 1 - forklift, sideloader, four-way forklift) The four-way forklift was purchased in 2022 and regularly serviced/inspected. The last inspections, DGUV-V68 and -V79, were carried out in December 2023 Known defects: one rectified defect, loss of air in one wheel - test report is available Thanks to its enclosed, weatherproof cab, it is well suited for work outside a factory hall. outside a factory building. TECHNICAL DETAILS Lifting height: 4040 mm Mast feed: 1250 mm Load center of gravity: 600 mm Load capacity: 4000 kg Fork dimensions: 50 x 150 x 1200 mm Ground clearance under mast: 150 mm Ground clearance center wheelbase: 200 mm Overhead guard height: 2435 mm Overall height retracted/extended: 2855 / 4870 mm Front overhang: 245 mm Rear overhang: 140 mm Fork carriage width: 1350 mm Width between the wheel arms: 1400 mm Nominal loss dimension to fork crown: 1100 mm Front track width: 1980 mm Wheelbase: 1915 mm Approach angle: max. 45° Ramp angle: max. 29° Departure angle: max. 45° Mast tilt to front/rear: 3/5° Climbing ability: 15 MACHINE DETAILS Dujb Hetqmmpohxn Eot Overall width: 2300 mm Overall length: 2190 mm dead weight: 6300 kg Travel speed: max. 15 km/h Turning radius: min. 2260 mm Platform height: 545 mm Platform width: 1200 mm Engine: V2003 T Kubota Diesel / 3 L GM LPG 44KW / 48 kW Vehicle electrics: 12 V Front tires Ø/W: 450 / 200 mm Rear tires Ø/W: 680 / 255 mm EQUIPMENT - Resiliently mounted all-round visibility cab - Ergonomically arranged controls - Hydrostatic all-wheel drive - Multi-way steering - Joystick to change direction - Super-elastic tires

Condition: refurbished (used), Functionality: fully functional, TECHNICAL DETAILS Faceplate diameter: 4000 mm Turning diameter: 4500 mm Workpiece height - max.: 2000 mm Installation height: 2000 mm Control for program: Siemens Sinumerik 840D Speed: 43 rpm Workpiece weight: 18 t MACHINE DETAILS Total power requirement: approx. 100 kW Machine weight approx.: 75 t Machine dimensions approx. LxWxH: approx. 6.0 x 8.0 x 6.4 m The carousel has 2 supports, one of which is equipped with a turret for turning work. Distance between side stands inside up to a height of 590 mm: approx. Ø 4,700 mm Distance between side stands inside up to a height of 2000 mm: approx. Ø 4,250 mm Dujb Hetmqz Rshxn Ejt EQUIPMENT 4x clamping elements approx. 1200 mm as well as various supports for alignment (height) lying on pallet, see photo (additional clamping jaws optionally available) Hinged belt conveyor Mayfran P.11M8032.03 -Dimensions: LxWxH: 7.0 x 1.25 x 1.1m -Beam profile W x H: 720 x 220 mm -Collapse length/collapse width: 5,300 / 400 mm -Discharge height/width: 800 / 450 mm -Insertion length: 5,600 mm -Driven by motor The following services were provided in 2020: -1x rear handle for vertical lift bridge Guide lining renewed -1x rear grip for bridge vertical stroke renewed -2x ball screw drive with nut X-axis (2x support horizontal movement) was overhauled -1x right-hand support overhauled (all wedge strips and some support linings renewed; lubrication repaired and optimized) -1x support left renewed

Year of construction: 2020, Condition: excellent (used), Functionality: fully functional, Mobile 3D coordinate measuring machine - Flexible 3D measurements at any location Dobepz Itys Hhxn Ejut Image guided 3D coordinate measuring machine Keyence Measuring System WM-3000 Coordinate Measuring System XM-2000, XM-1600 Digital Inspection Station TECHNICAL DETAILS camera chip: 4 MP CMOS Measuring range: 600 x 300 x 200 mm Smallest display unit: 1 µm Smallest angle: 0.0001 Repeatability (locked): +- 3 µm Table load: max. 25 kg Display: 15" TFT Initial purchase: 12/2020 Coordinate measuring system Measuring head: WM-3000 Camera tripod: WM-S1 Tripod extension / stand for measuring head: WM-EX1 Measuring software: incl. laptop Additional software 3D-CAD import/export: WM-H1C WM Battery charger: WM-BC1 Probe battery: WM-B1 Stylus: OP-88422; 2.5 mm Mouse: WM-M30D User manual: German Euro AC power cable: OP-99032, OP-99033 Attachments for camera realignment: OP-88546 Calibration cone for needle probe: OP-88547 Magnets for attachments camera realignment: 972344 Digital test station measuring head: XM-2000 Digital test station control unit: XM-1600 Additional software 3D-CAD import/export: XM-H1C XM Mouse, Keyboard: XM-M26E User manual: English AC power cable: OP-99031 MACHINE DETAILS Main electrical connection: 24 V Weight measuring head: 25,0 kg Weight tripod: 4,5 kg Weight extension: 4.0 kg

Year of construction: 2013, operating hours: 63,326 h, Condition: used, Functionality: fully functional, Fully automatic MICROFINISH machine for machining camshafts with max. Ø 60 mm and a total length of 700 mm. Year of manufacture 2000/2013 converted to pass bearing machine. TECHNICAL DETAILS workpiece length: 700 mm swing diameter: 60 mm center height: 1050 mm spindle stroke: 42 mm tailstock stroke: 250 mm number of spindles: 1 number of fiducial bearing machining stations: 1 piece Control: CNC Dujb Hhjpxl Uhoxn Eet Speed: 25 - 250 rpm (infinitely variable) oscillation stroke: 0 - 6,5 mm Oscillation frequency workpiece (axial): 100 - 1000 DH/min MACHINE DETAILS total power requirement: 61 kW machine weight: approx. 9 t (without additional aggregates) space requirement: approx. 4 x 2.5 x 2.4 m

Condition: ready for operation (used), Year of construction: 2009, Functionality: fully functional, TECHNICAL DETAILS Travel X / Y / Z: 1930 / 400 / 570 mm B-axis: ± 95° Spindle speed: 16,000 rpm Control: Siemens 840 D Positioner A/C axis: 360° Continuous positioner: 180 rpm Workpiece dimensions: max. 1,750 x 360 mm Table load: 200 kg Tool magazine: 24 positions (chain magazine) Spindle power: 54 kW Spindle torque: 136 Nm Spindle holder: HSK 63 Feed X / Y / Z: 40 m/min MACHINE DETAILS Weight: 25 t Dimensions: 6.4 x 2.8 x 3.0 m EQUIPMENT - Chip conveyor Djb Hhxetp Inmen Ejut - Paper filter - USB connection - Renishaw button

Year of construction: 2004, Condition: good (used), Functionality: fully functional, machine/vehicle number: 28860011684, TECHNICAL DETAILS X axis: 1000 mm Djb Hspvlbnjhxn Eeut Y-axis: 600 mm Z-axis: 600 mm Control: SIEMENS SINUMERIK 810 D POWERLINE rotational speed: 10.000 rpm tool places: 24 tool holder: SK 40 MACHINE DETAILS on request EQUIPMENT IKZ 15 bar, 800L tank Chipping machine Flushing gun X-Y-Z AxBs measuring system

Year of construction: 2005, Condition: good (used), Functionality: fully functional, fuel type: diesel, TECHNICAL DETAILS load capacity: 9550 kg Tires: L 6 Drive: Diesel Dsbspq R Tkj Hhxn Eeut MACHINE DETAILS own weight: 19,9 t engine: Perkins, 134 kW Transmission type: W

Year of construction: 2007, Condition: good (used), Functionality: fully functional, fuel type: diesel, TECHNICAL DETAILS Drive: Diesel Load capacity/load: 4,99 t load center: 500 mm Dusbspq R Hlj Hhxn Eet load distance: 535 mm Wheelbase: 2078 mm Lifting speed: 0.49 / 0.53 m/s Lowering speed: 0.54 / 0.51 m/s Axle load with load front/rear: 10355 / 1215 kg Axle load without load front/rear: 2880 / 3700 kg Tires: SE Tire size front: 315 / 70-15 (300-15) Tire size rear: 250 / 70-15 (250-15) Track width front: 1190 mm Track width rear: 1122 mm Turning radius: 2745 mm Inclination mast / fork carriage: 5,0 / 9,0°. Height of mast retracted: 2421 mm Height of mast when extended: 3916 mm Height above protective roof: 2416 mm Free stroke: 150 mm Lift: 3000 mm MACHINE DETAILS weight: 6580 length: 4116 mm width: 1448 mm Engine: VW CPYA; 55 kW Consumption: 4,6 l/h Driving speed: 24 km/h Tractive force with/without load: 25285 / 22375 N

Year of construction: 2016, Condition: excellent (used), Functionality: fully functional, Automation system of the Wittmann brand was newly installed in 2016 and used on a Netstal Synergy 2000. All documents, operating instructions, maintenance plans, measurement diagrams etc. included as well as control modules, power supply units and control panels. The Wittmann Picker can be used as a stand alone. TECHNICAL DETAILS Dujbepm Htgs Hhxn Est travel X / Y / Z: 900 / 1800 / 3000 mm payload: 15 kg Scope of delivery: robot, console, support V/2614-3104, adapter, conveyor system standard MB belt, SE protective enclosure incl. safety door with SIPA MACHINE DETAILS dimensions plant (LxWxH): 6560 x 4423 x 4154 mm Robot weight: 560 kg Mains connection: 3PH/N/PE mains voltage: 400 V tolerated voltage fluctuations: up to 10% connected load: 11 kVA frequency: 50-60 Hz tolerated frequency fluctuations: up to 2% supply line fuse: 16 A air pressure: max 6 bar maintenance of system functions: up to min 5 bar

Year of construction: 2008, Condition: good (used), Functionality: fully functional, Machine is provided free loaded. TECHNICAL DETAILS turning length over bed / saddle: 670 / 480 turning length: max. 750 mm turning diameter: max. 430 mm Bar diameter: max. 102 mm speed: 42 - 4200 rpm travel X / Z: 300 / 840 mm rapid traverse: 30 / 25 m/min spindle power cont. / 30 min: 30 / 22 kW spindle nose: ASA 11 tool holder: 12 places tool size: 25 x 25 mm / 40 mm tool speed: 45 / 6000 rpm Dusbepgrzco Hhxn Eot MACHINE DETAILS weight: 6700 kg dimensions: 4500 x 1900 x 2320 mm EQUIPMENT Chip conveyor tool presetting automatic door opening high pressure pump. 6 bar drive tools and various static tools (see picture)

Condition: ready for operation (used), Year of construction: 2005, operating hours: 12,100 h, Functionality: fully functional, TECHNICAL DETAILS Travel X / Y / Z: 1040 / 600 / 500 mm Spindle speed: 8,000 rpm Control: Fanuc 18 0i Table clamping surface: 1250 x 600 mm Table load: 800 kg Tool magazine: 30 positions (chain magazine) Spindle power: 12 - 17 kW Spindle torque: 200 Nm Spindle holder: ISO40 MACHINE DETAILS Weight: 8,800 kg High-pressure coolant: 20 bar Dsb Hhxnjtp Ilps Esut EQUIPMENT - Chip conveyor - paper filter - Portable handwheel - Rotoclear

Year of construction: 2022, operating hours: 0 h, Condition: new, Functionality: fully functional, Stockpile conveyor for direct feeding via crushing / screening plant. Machine is unused and new! TECHNICAL DETAILS stockpile capacity: up to 300 t/h with angle of repose 37°. Bulk density: 1,7kg/dm³ stockpile capacity (rotation 0°): 2500 t stockpile capacity (rotation 90°): 8500 t stockpile capacity (rotation 180°): 15000 t Feed size: 0 / 200mm Conveyor belt length: 18252 mm (AA) conveyor belt width: 900 mm Discharge height: max. 8320 mm Rubber belt: 3 ply smooth including conveyor belt scraper track length: 2500mm plate width: 400mm Perkins diesel engine: 37kW own weight: approx. 8000kg Dusb Hhjpdqr Esxn Ejt FURTHER - Cable remote control for crawler - head piece hydraulically foldable - central lubrication point

Year of construction: 2002, Condition: good (used), Functionality: fully functional, 3 Main spindle with 70mm bar passage FUNCTIONS Deb Hhen Uum Hsxn Ejut The raw bar is machined in spindle 1 and 2 with a 12-position star turret. At the same time, a 2-station front turret can work on this spindle (for drilling or internal boring). After machining, the drum cycles. The pre-turned part is finished in spindle 3 with a 12-position star turret and tapped. The part is then finished in the counter spindle and unloaded by the unloading gripper (monitoring available). The bar is retracted and the drum cycles. TECHNICAL DETAILS Bar passage: 70 mm counter spindle tool turret: 5 pieces, VDI30 (CNC cross slide) High pressure internal cooling: two turrets Measuring system: direct, high resolution in all X-axes Control system: Siemens 840 D Powerline tool monitoring: Artis Collet chuck: 4x Hainbuch SK65 Number of parallel tools: 5 Main spindle 1: Roughing of the turned part Tool holder: star turret with 12 positions Other: Possibility for additional work by 2-fold frontal turret Main spindle 2: Finishing of the turned part Tool holder: 12-position star turret Other: Possibility for finishing by 2-fold frontal turret Main spindle 3: Finishing, parting and backworking of the turned part Tool holder: star turret with 12 positions EQUIPMENT Bar feeder for 1500mm long bars

Year of construction: 2006, operating hours: 46,547 h, Condition: excellent (used), Functionality: fully functional, Laser punch press Trumpf TruMatic 6000 L with TrumaLift SheetMaster, ToolMaster and GripMaster as well as and scissor lift table. SheetMaster: not only loads and unloads the machine, it also sorts the parts the parts reliably ToolMaster: automatically changes the tools quickly, safely and conveniently GripMaster: reliably moves residual grids and strips TECHNICAL DETAILS Dueb Hhjn Nxw Dsxn Eet working area: 2585 x 1280 mm Control: Siemens Sinumerik 840 D laser power: 3200 watt sheet thickness mild steel: max. 8 mm sheet thickness stainless steel: max. 8 mm sheet thickness aluminum: max. 4 mm workpiece weight: max. 200 kg Accuracy: +/- 0.1 mm Punching force: 22 t punching diameter: max. 76,2 mm C-axis punching: 330 rpm stroke sequence: 450 - 1000 1/min stroke sequence marking: 2800 1/min MACHINE DETAILS Laser switch-on time: 46,547 h cutting time: 23.580 h length: 7500 mm width: 8100 mm height: 2400 mm Weight: 16000 kg (basic machine) Operating voltage: 400 V / 50 Hz Connected load: 76 kVA

Year of construction: 2001, Condition: good (used), Functionality: fully functional, Machine extensively overhauled worth EUR 18,000 Optional configuration QCRI 54/8: available, see pictures placement automation: available, see video Pressure flushing: 1 x through workpiece 1 x through electrode, 2 x lateral Suction flushing: 1 x through workpiece Central lubrication system automatically via NC in all axes TECHNICAL DETAILS Travel (X, Y, Z): 350, 250 300 mm Max man. Feeding speed: 900 mm/min Weight of electrodes: max. 20 kg Weight of workpieces: max. 40 kg Magazine configuration: 54/8 electrodes: 54 pieces Electrode dimensions: 70 x 70 x 200 Plates: 8 pieces workpiece dimensions: (4x) 320 x320 x 270 mm, (4x) 320 x 320 x 170 mm Dujb Hon Arnxshxn Est work table: 500 x 400 mm T-slots: 3 x 12 mm distance of grooves: 125 mm Available clamping systems: Erowa IST 3R Macro Megatool GPS 70 MACHINE DETAILS Dimensions (H x L x W): 2400 x 1900 x 1690 mm

Year of construction: 2007, Condition: good (used), Functionality: fully functional, machine/vehicle number: 203 / 232, HIGHLIGHTS - cost-reduced ECO model - with effective and gentle HELICAL washing system - HELICAL washing system makes the machine versatile and space-saving - reduced water consumption with perfect washing results - optimal separation of foreign bodies - for example sand, stones and insects - continuous washing process - with automatic filling no operator necessary Dujbonl Dzxo Hhxn Eot - washing, disinfection, mixing and rinsing possible in one machine - usable for e.g. lettuce, vegetables, herbs and fruit, both for cut and whole products - ideal accessibility for cleaning and maintenance TECHNICAL DETAILS capacity: 1800 kg/h inlet height: 1103 mm Outlet height: 771 mm Water tank: 785 l Water outlet: 2 x 2". Fresh water connection: 2 x 3/4 inch (GEKA coupling) MACHINE DETAILS power: 5,7 kW voltage: 3 ~ 400 V; N/PE dimensions: 3807 x 991 x 1500 mm weight: 583 kg

Condition: ready for operation (used), Year of construction: 2010, Functionality: fully functional, TECHNICAL DETAILS Travel X / Y / Z: 560 / 600 / 600 mm C-axis: 360° Speed: 12,000 rpm Control unit: Siemens 840 D Pallet clamping area: 400 x 400 mm Number of pallets: 2 Table load: max. 500 k Tool magazine: 60 places (chain magazine) Spindle holder: HSK 63 Spindle power: 20 kW Feed X / Y / Z: 60 m/min MACHINE DETAILS Dusb Hhxnstp Ikrs Est Weight: 9700 kg Dimensions: 4931 x 2626 x 2713 mm

Year of construction: 2002, Condition: used, Functionality: fully functional, machine/vehicle number: J20M0036, Wire EDM machine with automatic wire threading (AT) TECHNICAL DETAILS x-way: 500 mm y-way: 350 mm z-way: 300 mm amps: 50 A table length: 780 mm table width: 630 mm table feed: 1 - 1.300 mm/min wire feed: 15,00 m/min Dusbonh R Nke Hhxn Ejt Control: W21F AP-2 workpiece size: 1050 x 800 x 295 mm workpiece weight: max. 800 kg MACHINE DETAILS total power requirement: 12,00 kW machine weight: approx. 4,50 t space requirement: approx. 3.00 x 3.50 x 2.50 m