Screw compressor GA90FF

Atlas Copco GA90FF

Condition: ready for operation (used), functionality: fully functional, 2900 werkuren!!! Diesel-oil (1) -- Naphte (2) -- Electr (3): electric voltage: 3 x 380V - 50Hz Low press. (1) High press (2) Screw (3): 12.75 bar screw compressor Nsdpfx Ajxl Hxbshveku Volume flow rate: 18.3 m3/min Power imput: 90kW Volume (L): 1500 L

Condition: like new (used), Year of construction: 2021, operating hours: 620 h, functionality: fully functional, Kaeser Aircenter SM13-11 screw compressor (2021) Manufacturer: Kaeser Type: Aircenter SM13-11 Nkedsxnnd Ropfx Ahvju Year of manufacture: 2021 Condition: Very good, used Switch-on hours: 1356h Load hours: 606h Maintenance in 2825h Technical data Pressure 11 bar Effective delivery quantity 1.08 m³/min Nominal power drive motor 7.5 kW Protection class drive motor IP 54 Electrical supply 400 V / 3 Ph / 50 Hz Dimensions (WxDxH) 630x1200x1716 mm Weight 400 kg Compressed air tank 270 l Compressed air connection G 3/4 Sound pressure level 64 dB(A) Refrigeration dryer Power consumption 0.26 kW Pressure dew point 3 °C Pressure loss 0.2 bar Refrigerant R 134a Energy saving control Yes Electronic condensate drain Eco-Drain Electrical equipment EN 60204-1 Yes Scope of delivery: – Complete original documentation – RFID cards (2x) – 5m supply cable with 32A plug

Condition: good (used), Year of construction: 2012, MANUFACTURER: ATLASCOPCO MODEL: GA90FF S/N: API613191 YEAR: 2012 POWER (kW): 90 CAPACITY (m3/min): 16.21 PRESSURE (bar): 10 Njdpfx Asyll Ddjhveku HOURS (DOC/TOTAL): 59581 FREQUENCY INVERTER: no BUILT-IN DRYER: yes HEAT EXCHANGER: no COOLING (AIR/WATER): air

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: API628950, Technical characteristics: Core Specifications Attribute Motor Power Max Operating Pressure Free Air Delivery (FAD) Cooling Type Nkodpfjxx Snbsx Ahveu Noise Level Drive Type Integrated Dryer Voltage Dimensions (L×W×H) Weight Performance & Features Elektronikon® Touch Controller: Advanced microprocessor for monitoring, control, and remote access. RDX Synthetic Oil: Long-life lubrication for reduced maintenance. Energy Efficiency: Specific power as low as 18.9 kW/100 CFM, depending on load. Integrated Refrigerated Dryer: Ensures clean, dry air with minimal pressure drop. Oil-Water Separator: Built-in for environmental compliance and air purity. Reliability & Maintenance IP55-rated motor: Dust and water-resistant for harsh environments. No-loss condensate drain: Prevents compressed air waste and reduces downtime. Sound-insulated bodywork: Minimizes noise and vibration Machine status: WORKING

Condition: used, Year of construction: 2000, Lathe Mori Seiki SL 200 MC, year of manufacture 2000 Nkjdpfx Ahsxyvkvovsu

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: API628950, Technical characteristics: Core Specifications Attribute Value Motor Power 90 kW (approx. 125 hp) Max Operating Pressure 8.6 bar to 13 bar (125–188 psi) Free Air Delivery (FAD) ~565–588 CFM; 125 psi Cooling Type Air-cooled Noise Level ~74 dB(A) Drive Type Direct drive Integrated Dryer Yes (Full Feature “FF” version) Voltage 400V / 50Hz or 460V / 60Hz Dimensions (L×W×H) ~2179 × 1300 × 1968 mm Weight ~1500 kg Performance & Features - Elektronikon® Touch Controller: Advanced microprocessor for monitoring, control, and remote access. - RDX Synthetic Oil: Long-life lubrication for reduced maintenance. - Energy Efficiency: Specific power as low as 18.9 kW/100 CFM, depending on load. - Integrated Refrigerated Dryer: Ensures clean, dry air with minimal pressure drop. - Oil-Water Separator: Built-in for environmental compliance and air purity. Reliability & Maintenance - IP55-rated motor: Dust and water-resistant for harsh environments. Nkodjyam Tcopfx Ahvsu - No-loss condensate drain: Prevents compressed air waste and reduces downtime. - Sound-insulated bodywork: Minimizes noise and vibration. Machine status: WORKING

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: AIF074692, power: 90 kW (122.37 HP), operating pressure: 9 bar, type of cooling: air, Equipment: compressed air system, compressor, type plate available, The Atlas Copco GA90 FF compressor is a reliable and efficient solution designed to meet demanding industrial requirements. As an oil-lubricated model, it uses oil to ensure optimal performance and enhanced durability. Although this unit is pre-owned, it retains the quality and robustness typical of the Atlas Copco brand. With impressive rated power, the GA90 FF is perfectly suited for industrial applications where a consistent and reliable air supply is essential. Its integrated design facilitates easy installation and maintenance, reducing downtime and increasing productivity. Ideal for those seeking performance and reliability, the GA90 FF remains a top choice for industrial environments that require intensive compressor use. Nkedpfsxnz Naex Ahvsu

Condition: good (used), Year of construction: 2013, overall weight: 1,519 kg, power: 75 kW (101.97 HP), volume flow: 14.85 m³/h, pressure (max.): 12.8 bar, Air Compressor Atlas Copco GA75VSD FF Technical Data Manufacturer: Atlas Copco Airpower Model: GA75VSD FF Year of manufacture: 2013 Maximum pressure: 12.8 bar Free air delivery: 14.85 m³/min Motor power: 75 kW Motor speed: 3,000 rpm Weight: 1,519 kg Power supply: 400 V 50 Hz 3 phase Design: Oil-injected screw compressor Nsdpfx Ahsxk U Alevsku Control: Electronic control panel Origin: Made in Belgium No liability is accepted for the correctness, completeness, or up-to-dateness of the information provided.

Condition: excellent (used), Year of construction: 2006, Atlas Copco GA 90 FF With integrated refrigerant dryer. Refrigerant R 404a. Nodpfx Aork Nuyjhveku

Condition: used, Year of construction: 2008, Technical details: x-travel: 1400 mm y-travel: 1200 mm z-travel: 1350 mm control: MSX- 701 Mapps III table surface area: 800 x 800 mm rapid traverse: 50 m/min table rotating: 360.000 x 0,001 B-Achse ° table load: 2,0 t numbers of pallets: 2 turning speed range: 8000 1/min power capacity - milling spindle: 37 kW no. of tools in the magazine: 60 Stück tool taper: HSK-A 100 weight: 31 t dimensions: 5,9 x 4,1 x 3,68 m Equipment: - Thru-the-spindel coolant system Mayfran Consep 2000 70 bar with chipconveyor - Helical cutting + Synchronized tapping - storage 1 MB - Big Plus spindle - Knoll filter system - mechanical Oil dust collector - elect. hand wheel - renishaw - abso- scale i X/Y/Z- axis - 5 free m- funktions - 48 extra off sets Nsdpfx Aewi Ibujhvoku - dual ballscrews on X/Y/Z- axis *